CD10FD101GO3F Equivalent & Substitute Parts

Part Overview

The CD10FD101GO3F is a 100 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE) in the CD10 series. This through-hole radial component operates at 500 V rated voltage with ±2% tolerance and is designed for general-purpose applications across an operating temperature range of -55°C to 125°C. The part is currently active in production status. Substitute parts are identified when inventory constraints, compliance requirements, or procurement lead times necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

CD10FD101GO3F

Cornell Dubilier Electronics (CDE)In Stock: 1015CD10FD101GO3F Datasheet

Current PartRFQ

CD10FD101GO3

Cornell Dubilier Electronics (CDE)In Stock: 864CD10FD101GO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD10FD101GO3F is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 100 pF (exact match required)
• Tolerance: ±2% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.142" (3.60 mm) (exact match required)
• Physical Dimensions: 0.370" L x 0.201" W, Height 0.350" max (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)

The identified substitute part CD10FD101GO3 maintains identical electrical and mechanical specifications. Differences in regulatory compliance status (RoHS and REACH) do not affect functional substitutability but must be evaluated against application requirements and regional regulations.

Parameter Comparison

Engineering Selection Recommendations

CD10FD101GO3F is the primary selection for applications requiring ROHS3 compliance and REACH unaffected status. This part is suitable for regulated markets and applications with strict environmental compliance mandates.

CD10FD101GO3 serves as a functional equivalent when CD10FD101GO3F is unavailable. This substitute maintains identical electrical performance and mechanical compatibility. Selection of this part requires confirmation that RoHS non-compliance and REACH affected status are acceptable within the application's regulatory framework and end-use requirements.

Both parts are active products from the same manufacturer and series, ensuring consistent quality and performance characteristics across substitution scenarios.

Frequently Asked Questions (FAQ)

Q: Can CD10FD101GO3 be used as a direct replacement for CD10FD101GO3F?

A: CD10FD101GO3 is electrically and mechanically equivalent to CD10FD101GO3F. Both parts share identical capacitance (100 pF), tolerance (±2%), voltage rating (500 V), dielectric material (mica), mounting type (through hole), package configuration (radial), lead spacing (0.142"), physical dimensions, and operating temperature range (-55°C to 125°C). Substitution is valid from a functional standpoint. Regulatory compliance differences (RoHS and REACH status) must be evaluated against application requirements.

Q: What are the critical parameters that determine substitutability?

A: Substitutability is determined by exact equivalence in capacitance value, tolerance, voltage rating, dielectric material, mounting type, package configuration, lead spacing, physical dimensions, and operating temperature range. Any deviation in these parameters disqualifies a part from substitution.

Q: Are there physical compatibility concerns when substituting these parts?

A: No. Both parts are identical in physical dimensions (0.370" L x 0.201" W, 0.350" max height), lead spacing (0.142"), and radial package configuration. PCB footprints and mounting requirements are identical.

Q: What is the difference between the RoHS and REACH status of these parts?

A: CD10FD101GO3F is ROHS3 compliant and REACH unaffected, meeting strict environmental regulations for regulated markets. CD10FD101GO3 is RoHS non-compliant and REACH affected. These differences do not affect electrical or mechanical performance but impact regulatory acceptability in specific jurisdictions and applications.

Q: Can both parts be used interchangeably in the same circuit design?

A: From an electrical and mechanical perspective, yes. Both parts deliver identical performance in circuit applications. Regulatory and compliance considerations must be addressed separately based on application requirements and regional regulations.