CCR06CG103FS Equivalent & Substitute Parts

Part Overview

The CCR06CG103FS is a 10000 pF (0.01 µF) ceramic capacitor manufactured by KEMET, rated for 50V with ±1% tolerance and C0G/NP0 temperature coefficient. This through-hole radial component is part of the Military MIL-PRF-20 CCR06 series and is designed for high-reliability applications. The part is currently active in production with 715 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and performance ratings to ensure direct circuit compatibility.

Substiute Parts

CCR06CG103FS

KEMETIn Stock: 774CCR06CG103FS Datasheet

Current PartRFQ

CCR06CG103FSV

KEMETIn Stock: 1040CCR06CG103FSV Datasheet

DirectRFQ

CCR06CG103FS

KEMETIn Stock: 774CCR06CG103FS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the CCR06CG103FS is determined by strict equivalence across the following critical parameters:

• Electrical Specifications: Capacitance value (10000 pF), tolerance (±1%), voltage rating (50V), and temperature coefficient (C0G/NP0) must be identical
• Mechanical Compatibility: Through-hole radial mounting, lead spacing (0.200"), and physical envelope dimensions must match
• Performance Rating: Operating temperature range (-55°C to 125°C) and failure rate classification (S, 0.001%) must be maintained
• Series Compliance: Parts must belong to the Military MIL-PRF-20 CCR06 series

The CCR06CG103FSV is a direct equivalent manufactured by KEMET under the same base product number (CCR06CG) with identical electrical and mechanical specifications. Both parts are interchangeable in circuit applications requiring this capacitance and voltage rating.

Parameter Comparison

Engineering Selection Recommendations

Both CCR06CG103FS and CCR06CG103FSV are active production parts manufactured by KEMET with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and procurement lead times. The CCR06CG103FSV currently has higher stock availability (995 units versus 715 units). Both parts carry the same RoHS non-compliant and REACH Affected status, with identical ECCN (EAR99) and HTSUS (8532.23.0060) classifications. For applications requiring military-grade reliability with MIL-PRF-20 compliance, either part satisfies the specification requirements without modification to circuit design or PCB layout.

Frequently Asked Questions (FAQ)

Q: Can CCR06CG103FSV be used as a direct replacement for CCR06CG103FS?

A: Yes. Both parts are manufactured by KEMET with identical capacitance (10000 pF), tolerance (±1%), voltage rating (50V), temperature coefficient (C0G/NP0), and physical dimensions. They are electrically and mechanically interchangeable.

Q: What determines if a part can substitute for the CCR06CG103FS?

A: Substitution requires matching all critical parameters: 10000 pF capacitance, ±1% tolerance, 50V voltage rating, C0G/NP0 temperature coefficient, -55°C to 125°C operating range, through-hole radial mounting, 0.200" lead spacing, and 0.290" × 0.090" physical dimensions.

Q: Are there any differences in the seated height between these parts?

A: The CCR06CG103FSV specifies a maximum seated height of 0.300" (7.62 mm). The CCR06CG103FS does not provide this specification in the available data. Both parts maintain the same radial package envelope and lead spacing, ensuring PCB compatibility.

Q: Do both parts meet military specifications?

A: Yes. Both CCR06CG103FS and CCR06CG103FSV are part of the Military MIL-PRF-20 CCR06 series with S-class failure rate (0.001%) and are rated for high-reliability applications.

Q: What is the difference between C0G and NP0 designations?

A: C0G and NP0 are equivalent designations for the same temperature coefficient characteristic. Both indicate minimal capacitance change across the operating temperature range (-55°C to 125°C).