CCP-1-30CF Equivalent & Substitute Parts

Part Overview

The CCP-1-30CF is a fuse carrier manufactured by Eaton - Bussmann Electrical Division, rated for 600V at 30A operation. This component is classified as obsolete, making identification of suitable substitute parts essential for system maintenance and component replacement in existing installations. The CCP series fuse carrier provides switching and protection functionality in electrical distribution systems operating at 600V nominal voltage with 30A current capacity.

Substiute Parts

CCP-1-30CF

Eaton - Bussmann Electrical DivisionIn Stock: 1175CCP-1-30CF Datasheet

Current PartRFQ

CCP2-1-30CF

Eaton - Bussmann Electrical DivisionIn Stock: 937CCP2-1-30CF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CCP-1-30CF are identified based on the following critical electrical and mechanical parameters:

• Voltage Rating: 600V or higher (allows operation in the original application voltage range)
• Current Rating: 30A (exact match required for circuit protection coordination)
• Manufacturer: Eaton - Bussmann Electrical Division (maintains design compatibility and performance characteristics)
• Series Compatibility: CCP or CCP2 series (ensures mechanical and electrical interface compatibility)
• RoHS Compliance: Required for modern procurement and environmental standards

The CCP2-1-30CF qualifies as a substitute based on matching current rating (30A), manufacturer origin, and RoHS compliance status. Voltage rating differences and product type variations are noted in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

CCP2-1-30CF Substitution Considerations:

The CCP2-1-30CF is an active product from the same manufacturer with identical 30A current rating. Both parts carry EAR99 export classification and meet RoHS compliance requirements. The CCP2-1-30CF holds ROHS3 certification, representing current compliance standards.

Key differences exist in voltage rating (347V versus 600V) and product type classification (Switch versus Fuse Carrier). These differences must be evaluated against the specific application requirements. The CCP2-1-30CF is available in bulk packaging, whereas the original part number does not specify packaging configuration.

Selection of the CCP2-1-30CF should be based on confirmation that the application voltage requirement is compatible with the 347V rating and that the switch functionality meets the circuit protection and control requirements of the original installation.

Frequently Asked Questions (FAQ)

Q: Can the CCP2-1-30CF directly replace the CCP-1-30CF in all applications?

A: The CCP2-1-30CF matches the 30A current rating and manufacturer origin. However, the voltage rating difference (347V versus 600V) and product type variation (Switch versus Fuse Carrier) require application-specific verification before substitution.

Q: What is the significance of the voltage rating difference between these parts?

A: The CCP-1-30CF is rated for 600V operation, while the CCP2-1-30CF is rated for 347V. The substitute part operates at a lower voltage rating and must only be used in applications where the system voltage does not exceed 347V.

Q: Why is the CCP-1-30CF listed as obsolete?

A: Obsolete status indicates the part is no longer manufactured or supported by Eaton - Bussmann Electrical Division. Substitute parts must be identified for ongoing maintenance and replacement needs in systems using this component.

Q: What does RoHS compliance mean for these components?

A: RoHS compliance indicates the parts meet restrictions on hazardous substances in electrical and electronic equipment. Both the CCP-1-30CF (RoHS Compliant) and CCP2-1-30CF (ROHS3 Compliant) meet these environmental standards, with ROHS3 representing the current certification level.

Q: Are there packaging differences between these parts?

A: The CCP-1-30CF packaging is not specified in available documentation. The CCP2-1-30CF is supplied in bulk packaging. Packaging configuration may affect procurement, storage, and handling requirements.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life with no moisture sensitivity restrictions. The CCP-1-30CF carries this rating, while the CCP2-1-30CF lists MSL as Not Applicable, indicating different handling and storage requirements.