CCP-1-30CC Equivalent & Substitute Parts

Part Overview

The CCP-1-30CC is a fuse carrier manufactured by Eaton - Bussmann Electrical Division, rated for 600V at 30A. This component is classified as obsolete, making identification of suitable substitutes essential for system maintenance and component replacement in existing installations. The CCP-1-30CC belongs to the CCP series and maintains RoHS compliance with MSL Level 1 (unlimited moisture sensitivity rating).

Substiute Parts

CCP-1-30CC

Eaton - Bussmann Electrical DivisionIn Stock: 809CCP-1-30CC Datasheet

Current PartRFQ

CCP2-1-30CC

Eaton - Bussmann Electrical DivisionIn Stock: 891CCP2-1-30CC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CCP-1-30CC is determined by the following critical electrical and mechanical parameters:

• Voltage Rating: 600V (primary electrical constraint)
• Current Rating: 30A (primary electrical constraint)
• Manufacturer: Eaton - Bussmann Electrical Division (maintains design compatibility within the same manufacturer ecosystem)
• Series Compatibility: CCP and CCP2 series components from the same manufacturer
• RoHS Compliance: Required for modern procurement and regulatory adherence

The CCP2-1-30CC qualifies as a substitute based on matching current rating (30A) and manufacturer origin. However, the voltage rating differs (347V vs. 600V), which represents a design evolution within the product line. This substitution is valid only in applications where the lower voltage rating of 347V is acceptable for the intended circuit configuration.

Parameter Comparison

Engineering Selection Recommendations

The CCP2-1-30CC is the designated substitute for the obsolete CCP-1-30CC. Selection of this substitute is supported by:

• Active Product Status: The CCP2-1-30CC maintains active production status, ensuring availability and supply chain continuity.
• Current Rating Match: Both components are rated for 30A, maintaining electrical load capacity.
• Enhanced Compliance: The CCP2-1-30CC achieves ROHS3 compliance, exceeding the RoHS compliance of the original part.
• Manufacturer Continuity: Both components originate from Eaton - Bussmann Electrical Division, ensuring design and performance consistency within the manufacturer's product ecosystem.

The voltage rating difference (347V vs. 600V) must be evaluated against the specific application requirements. The CCP2-1-30CC is suitable for applications operating at or below 347V. For applications requiring 600V operation, alternative solutions outside the provided substitute list must be considered.

Frequently Asked Questions (FAQ)

Q: Can the CCP2-1-30CC directly replace the CCP-1-30CC in all applications?

A: The CCP2-1-30CC matches the 30A current rating and maintains manufacturer compatibility. However, the voltage rating is 347V compared to the original 600V. Direct replacement is valid only in applications where the circuit operates at 347V or lower. Voltage compatibility must be confirmed before substitution.

Q: What is the significance of the product status change from Obsolete to Active?

A: The CCP2-1-30CC is actively manufactured and stocked, eliminating supply chain risk associated with obsolete components. This ensures long-term availability for maintenance and replacement needs.

Q: Are there packaging differences between the CCP-1-30CC and CCP2-1-30CC?

A: The CCP-1-30CC is packaged with a dash designation, while the CCP2-1-30CC is supplied in Bulk packaging. Packaging format should be confirmed against procurement and storage requirements.

Q: Does the ROHS3 compliance of the CCP2-1-30CC affect compatibility?

A: ROHS3 compliance represents an enhancement over RoHS compliance. The CCP2-1-30CC meets current regulatory standards and is suitable for modern procurement environments. No compatibility issues arise from this upgrade.

Q: What is the Moisture Sensitivity Level difference between these components?

A: The CCP-1-30CC has MSL Level 1 (unlimited), indicating no moisture sensitivity constraints. The CCP2-1-30CC lists MSL as Not Applicable, indicating the component does not require moisture sensitivity classification. Both designations are compatible with standard handling and storage practices.