Equivalent & Substitute Parts for CCM-4805SF

Part Overview

The CCM-4805SF (Manufacturer Part Number: CCM-4805SF) from TDK-Lambda Americas Inc is an isolated DC-DC converter module delivering a single 5V output at up to 600mA with an input range of 36V to 72V. It is classified as an ITE (Commercial) converter, offered in a 6-DIP through-hole package, and is now listed as Obsolete. Due to its product status, sourcing direct replacements is necessary for maintaining supply continuity.

Substiute Parts

CCM-4805SF

TDK-Lambda Americas IncIn Stock: 877CCM-4805SF Datasheet

Current PartRFQ

CC3-4805SF-E

TDK-Lambda Americas IncIn Stock: 1160CC3-4805SF-E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part selection uses only parameters specified for isolated DC-DC converter modules in this product category. Substitutes must precisely match or encompass the following criteria:

• Output voltage: 5V
• Output current: 600mA (maximum)
• Number of outputs: 1
• Input voltage range: 36V–72V (or wider)
• Rated power: 3W
• Voltage isolation: 500V
• Mounting type: Through hole
• Application suitability: ITE (Commercial)
• MSL: 1 (Unlimited)

Mechanical package, case, and operating temperature range are referenced strictly according to provided data.

Parameter Comparison

Engineering Selection Recommendations

The CCM-4805SF is classified as obsolete. The CC3-4805SF-E from TDK-Lambda Americas Inc matches all key electrical and application parameters specified, with an expanded input voltage range and extended operating temperature limits. Both parts conform to MSL 1 (Unlimited). The substitute is RoHS compliant and REACH unaffected, as per provided compliance data.

Frequently Asked Questions (FAQ)

Q1: What determines if the CC3-4805SF-E is an acceptable substitute for CCM-4805SF?
A1: Acceptability is determined strictly by matching parameters: 5V output, up to 600mA, 1 output, input range overlapping or exceeding 36V–72V, 3W power, 500V isolation, through-hole module suitable for ITE (Commercial), and MSL 1 (Unlimited).

Q2: Are there mechanical differences between the CCM-4805SF and CC3-4805SF-E?
A2: The CCM-4805SF uses a 6-DIP module (1.12" x 0.81" x 0.33"). The CC3-4805SF-E uses a 7-DIP module (0.90" x 0.65" x 0.34"). Refer to these dimensions for mechanical layout compatibility.

Q3: Is compliance status different between the main part and its substitute?
A3: According to provided information, CC3-4805SF-E offers RoHS compliance and is REACH unaffected. Compliance for the CCM-4805SF is not specified.

Q4: How does the package type affect substitution?
A4: Both parts use through-hole mounting and DIP module packaging; however, DIP pin count and module size differ. Review package/case rows in the comparison table for exact values.

Q5: Are there environmental or thermal considerations?
A5: The substitute part, CC3-4805SF-E, offers a wider operating temperature range (-40°C ~ 85°C) compared to the CCM-4805SF (-20°C ~ 70°C with derating), as per the provided parameters.