CCM02-1NO-32 Equivalent & Substitute Parts

Part Overview

The CCM02-1NO-32 is a 10-position (8 + 2) smart card connector manufactured by C&K, featuring push-pull insertion/removal, through-hole right-angle mounting, and gold-plated contacts. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and component sourcing. The part is RoHS non-compliant and carries unlimited moisture sensitivity rating (MSL 1).

Substiute Parts

CCM02-1NO-32

C&KIn Stock: 1176CCM02-1NO-32 Datasheet

Current PartRFQ

7332E0225S15LF

Amphenol ICC (FCI)In Stock: 9997332E0225S15LF Datasheet

SimilarRFQ

7361E0525S05LF

Amphenol ICC (FCI)In Stock: 9817361E0525S05LF Datasheet

SimilarRFQ

7431E0225S01LF

Amphenol ICC (FCI)In Stock: 8467431E0225S01LF Datasheet

SimilarRFQ

7432E0225S01LF

Amphenol ICC (FCI)In Stock: 12717432E0225S01LF Datasheet

SimilarRFQ

7432E0525S01LF

Amphenol ICC (FCI)In Stock: 11087432E0525S01LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CCM02-1NO-32 is determined by the following critical parameters:

• Card Type: Smart Card (all substitutes must match)
• Number of Positions: 10 (8 + 2) (all substitutes must match)
• Insertion/Removal Method: Push In, Pull Out (all substitutes must match)
• Contact Finish: Gold (all substitutes must match)
• MSL Rating: 1 (Unlimited) (all substitutes must match)

Secondary parameters that may vary within acceptable substitution:

• Mounting Type: Through Hole Right Angle (primary) or Panel Mount (limited application)
• Height Above Board: Tolerance range 0.213" to 0.228" (5.40mm to 5.80mm)
• Features: Board Guide and/or Card Guide presence may differ
• RoHS Status: Active substitutes may be RoHS Compliant or ROHS3 Compliant
• Manufacturer: Amphenol ICC (FCI) substitutes are qualified alternatives

All five substitute parts listed meet the critical parameter requirements for functional equivalence to the CCM02-1NO-32.

Parameter Comparison

Engineering Selection Recommendations

For Through-Hole Right-Angle Applications:

The 7432E0225S01LF and 7432E0525S01LF are primary substitutes for the CCM02-1NO-32. Both are active products with RoHS compliance (ROHS3 for 7432E0525S01LF), ensuring long-term availability and regulatory alignment. The 7432E0225S01LF provides identical feature set (Board Guide, Switch) with minimal height variance (0.213" vs. 0.228"). The 7432E0525S01LF adds Card Guide functionality for enhanced mechanical stability.

The 7431E0225S01LF and 7332E0225S15LF are secondary options. Both feature GXT™ contact finish and active product status. The 7431E0225S01LF omits Board Guide, reducing mechanical support. The 7332E0225S15LF maintains Board Guide and Switch features with RoHS Compliance.

For Panel Mount Applications:

The 7361E0525S05LF is the only panel mount option among substitutes. This part is suitable only for applications requiring panel-mounted smart card connectors and is not interchangeable with through-hole designs.

Compliance Considerations:

All substitute parts are active products with RoHS or ROHS3 compliance, addressing the non-compliance status of the obsolete CCM02-1NO-32. Selection should prioritize parts matching the original mounting configuration and feature set to minimize design modifications.

Frequently Asked Questions (FAQ)

Q: Can 7361E0525S05LF replace CCM02-1NO-32 directly?

A: No. The 7361E0525S05LF is panel mount, while the CCM02-1NO-32 is through-hole right-angle. Panel mount connectors require different PCB footprints and mounting hardware. Use 7361E0525S05LF only if your application requires panel mounting.

Q: What is the height difference between CCM02-1NO-32 and substitute parts?

A: The CCM02-1NO-32 has a height of 0.228" (5.80mm). All Amphenol ICC (FCI) substitutes measure 0.213" (5.40mm), a 0.015" (0.40mm) reduction. This difference may affect PCB clearance and component spacing in dense layouts.

Q: Are GXT™ contact finishes compatible with standard gold contacts?

A: GXT™ is an enhanced gold plating technology. Parts with GXT™ finish (7332E0225S15LF, 7431E0225S01LF, 7432E0225S01LF, 7432E0525S01LF) are electrically and mechanically compatible with standard gold-plated connectors. GXT™ provides improved durability and contact reliability.

Q: Which substitute offers the best feature match to the original part?

A: The 7432E0225S01LF provides the closest feature match, including Board Guide and Switch functionality identical to the CCM02-1NO-32. The 7432E0525S01LF adds Card Guide for enhanced mechanical support.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: RoHS Compliant indicates compliance with the original RoHS Directive (2002/95/EC). ROHS3 Compliant indicates compliance with RoHS 3 (Directive 2011/65/EU as amended). Both certifications restrict hazardous substances. ROHS3 is the current regulatory standard.

Q: Are all substitutes available in the same packaging?

A: All substitute parts are supplied in Tray packaging. The original CCM02-1NO-32 packaging is not specified in available data.

Q: Can I use 7431E0225S01LF if Board Guide is not critical to my application?

A: Yes. The 7431E0225S01LF is functionally equivalent for applications where Board Guide is not required. It maintains all critical parameters: 10-position smart card connector, push-pull insertion, through-hole right-angle mounting, gold contact finish, and unlimited MSL rating.