CCM01-6201 Equivalent & Substitute Parts

Part Overview

The CCM01-6201 is a 10-position smart card push-pull connector manufactured by C&K, designed for through-hole, right-angle mounting applications. This connector features board guide, board lock, and switch functionality with gold-plated contacts. The part is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement.

Substiute Parts

CCM01-6201

C&KIn Stock: 875CCM01-6201 Datasheet

Current PartRFQ

7334L2622F02LF

Amphenol ICC (FCI)In Stock: 7577334L2622F02LF Datasheet

SimilarRFQ

7334L2622F13LF

Amphenol ICC (FCI)In Stock: 22607334L2622F13LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CCM01-6201 are qualified based on the following critical parameters that must match or be compatible:

• Card Type: Smart Card
• Number of Positions: 10 (8 + 2)
• Connector Type: Connector
• Insertion, Removal Method: Push In, Pull Out
• Mounting Type: Through Hole, Right Angle
• Features: Board Guide, Board Lock, Switch
• Contact Finish: Gold
• Moisture Sensitivity Level: 1 (Unlimited)

The two substitute parts listed—7334L2622F02LF and 7334L2622F13LF—both meet these core electrical and mechanical requirements. Both are manufactured by Amphenol ICC (FCI), are active products, and maintain compatibility with the original connector's functional specifications.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are active products with RoHS compliance, providing regulatory advantages over the obsolete CCM01-6201. The primary differences between the two substitutes are height above board and mounting feature orientation.

7334L2622F02LF offers 678 units in stock with a height of 0.461" (11.70mm) and standard top-mounted orientation.

7334L2622F13LF provides greater inventory availability with 2232 units in stock, a height of 0.497" (12.63mm), and standard top-mounted orientation. This part is also REACH Affected.

Selection between these substitutes depends on PCB layout constraints and available board space. Both maintain electrical and mechanical compatibility with the original CCM01-6201 specification.

Frequently Asked Questions (FAQ)

Q: Can 7334L2622F02LF and 7334L2622F13LF be used interchangeably with CCM01-6201?

A: Both parts meet the core functional requirements: 10-position smart card connector, push-pull insertion method, through-hole right-angle mounting, and gold contact finish. However, the height above board differs between parts. PCB layout must accommodate the specific height of the selected substitute.

Q: What is the primary difference between the two substitute parts?

A: The main differences are height above board (0.461" for 7334L2622F02LF versus 0.497" for 7334L2622F13LF) and inventory availability (678 units versus 2232 units). Both are electrically and mechanically equivalent.

Q: Why is the mounting feature different between the main part and substitutes?

A: The CCM01-6201 uses reverse bottom mounting, while both substitutes use standard top mounting. This difference affects PCB layout and must be evaluated during design transition.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both 7334L2622F02LF and 7334L2622F13LF are RoHS Compliant, whereas the original CCM01-6201 is RoHS non-compliant.

Q: What packaging is available for the substitute parts?

A: Both substitute parts are supplied in Tray packaging.