Equivalent & Substitute Parts for CCK-0505SF

Part Overview

The CCK-0505SF from TDK-Lambda Americas Inc is an Isolated Module DC-DC Converter delivering a single 5V output at up to 300mA from a 4.5V to 9V input, with a rated power of 1.5W. Its 500V isolation and OCP feature support ITE (Commercial) applications. The part is currently Obsolete. Sourcing alternative models is necessary for ongoing designs, production continuity, or maintenance requirements.

Substiute Parts

CCK-0505SF

TDK-Lambda Americas IncIn Stock: 722CCK-0505SF Datasheet

Current PartRFQ

CC1R5-0505SF-E

TDK-Lambda Americas IncIn Stock: 2393CC1R5-0505SF-E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by matching the following key parameters:

• Type
• Number of Outputs
• Voltage - Input (Min/Max)
• Voltage - Output 1
• Current - Output (Max)
• Power (Watts)
• Voltage - Isolation
• Applications
• Mounting Type
• Package / Case
• Size / Dimension
• Operating Temperature Range
• Product Status

The substitute part, CC1R5-0505SF-E, strictly adheres to the provided electrical and mechanical criteria.

Parameter Comparison

Engineering Selection Recommendations

The CCK-0505SF is designated Obsolete, requiring substitution for new designs or continued production. The CC1R5-0505SF-E is Active and RoHS Compliant. Both parts share identical input voltage range, output voltage, output current, isolation rating, mounting type, and application category. Substitute selection based strictly on inventory status, regulatory compliance, and part availability meets the requirements defined by the provided parameters.

Frequently Asked Questions (FAQ)

Q1: What are the primary electrical parameters to confirm when selecting a substitute for CCK-0505SF?
A1: Allowed input voltage range, output voltage, output current, and isolation voltage are the primary electrical substitution criteria.

Q2: How does package type affect substitution compatibility?
A2: The main part uses a 6-DIP Module. The substitute uses a 7-DIP Module. Physical layout and pin compatibility should be evaluated based strictly on these parameters.

Q3: Is the substitute part suitable for the same application environment?
A3: Both parts are categorized for ITE (Commercial) use within their specified operating temperature ranges.

Q4: What is the difference in power rating and does this impact selection?
A4: The main part is rated at 1.5 W, and the substitute is rated at 1 W. Selection must be based on the explicit power requirement in the target design as per allowed parameters.

Q5: Are there compliance or status differences between main and substitute parts?
A5: The main part is Obsolete; the substitute is Active and RoHS compliant. Both share ECCN and HTSUS coding consistent with their product category.