CC-9P-V524-C WiFi Transceiver Module Equivalent & Substitute Parts

Part Overview

The CC-9P-V524-C is a WiFi 802.11a/b/g transceiver module manufactured by Digi, part of the ConnectCore® 9P 9215 series. This surface mount RF module operates at 2.4GHz and 5GHz frequencies with a maximum data rate of 54Mbps and is designed for embedded wireless applications requiring U.FL antenna connectivity. The part is currently marked as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Substiute Parts

CC-9P-V524-C

DigiIn Stock: 1011CC-9P-V524-C Datasheet

Current PartRFQ

CC-9P-V502-C

DigiIn Stock: 1275CC-9P-V502-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CC-9P-V524-C is determined by strict equivalence across the following critical parameters:

• RF standard and protocol compliance (802.11a/b/g)
• Operating frequency bands (2.4GHz and 5GHz)
• Data rate capability (54Mbps)
• RF performance metrics (12dBm output, -72dBm sensitivity)
• Serial interface support (Ethernet, I2C, SPI, UART)
• Antenna connector type (U.FL)
• Supply voltage (3.3V)
• Mounting technology (Surface Mount)
• Temperature operating range (-40°C to 85°C)
• Regulatory compliance (RoHS, REACH)

The CC-9P-V502-C qualifies as a direct substitute based on matching all critical RF, interface, and mechanical parameters. Differences in memory configuration and product status do not affect functional substitutability for applications requiring the specified RF and interface capabilities.

Parameter Comparison

Engineering Selection Recommendations

The CC-9P-V502-C is functionally equivalent to the CC-9P-V524-C across all RF performance, interface, and mechanical specifications. Both parts utilize the identical NS9215 IC and maintain identical electrical characteristics for wireless operation.

Selection between these parts should be based on:

• Product lifecycle status: CC-9P-V524-C is Obsolete; CC-9P-V502-C is Not For New Designs
• Memory requirements: CC-9P-V524-C provides 16MB Flash and 32MB SDRAM; CC-9P-V502-C provides 4MB Flash and 8MB SDRAM
• Regulatory compliance: Both parts maintain RoHS and REACH compliance
• Packaging availability: CC-9P-V524-C available in standard packaging; CC-9P-V502-C available in Bulk packaging

For applications where memory capacity is not a limiting factor, CC-9P-V502-C provides functional equivalence with current inventory availability.

Frequently Asked Questions (FAQ)

Q: Can CC-9P-V502-C replace CC-9P-V524-C in existing designs?

A: Yes. Both parts share identical RF specifications, operating frequencies, data rates, power output, sensitivity, serial interfaces, antenna connector type, supply voltage, and operating temperature range. The parts are functionally equivalent for wireless transceiver applications.

Q: What is the difference between these two parts?

A: The primary differences are memory configuration and product lifecycle status. CC-9P-V524-C includes 16MB Flash and 32MB SDRAM, while CC-9P-V502-C includes 4MB Flash and 8MB SDRAM. CC-9P-V524-C is marked Obsolete; CC-9P-V502-C is marked Not For New Designs.

Q: Are the antenna connectors compatible?

A: Yes. Both parts use U.FL antenna connectors and require external antennas. Antenna selection and impedance matching remain identical between the two modules.

Q: Do both parts support the same serial interfaces?

A: Yes. Both CC-9P-V524-C and CC-9P-V502-C support Ethernet, I2C, SPI, and UART interfaces with identical electrical specifications.

Q: What are the packaging differences?

A: CC-9P-V524-C is available in standard packaging; CC-9P-V502-C is available in Bulk packaging. Both are surface mount modules with identical mechanical form factors.

Q: Are there regulatory compliance differences?

A: No. Both parts maintain identical RoHS Compliant and REACH Unaffected status.