CC4850W4V Solid State Relay - Equivalent & Substitute Parts

Part Overview

The CC4850W4V is a solid state relay (SSR) manufactured by Sensata Technologies, classified as a SPST-NO (Single Pole Single Throw - Normally Open) configuration with dual channels in a Hockey Puck package. This component is designed for AC load switching applications with zero-cross detection, operating with a 4-32VDC input signal and supporting loads up to 50A at 48-660V. The product maintains Active status with full RoHS compliance. Substitute parts become necessary when Hockey Puck packaging is unavailable, when alternative mounting configurations are required, or when inventory constraints necessitate equivalent alternatives from qualified manufacturers.

Key Parameters

Parameter	Value
Manufacturer	Sensata Technologies
Part Number	CC4850W4V
Circuit Configuration	SPST-NO (1 Form A) x 2
Output Type	AC, Zero Cross
Input Voltage	4 - 32VDC
Load Voltage Range	48 - 660V
Load Current	50A
Package Type	Hockey Puck
Mounting Type	Chassis Mount
Termination	Screw Terminal
Product Status	Active
RoHS Compliance	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the CC4850W4V is determined by strict alignment of electrical and mechanical parameters. The critical substitution criteria are:

Circuit configuration: SPST-NO (1 Form A) x 2 channels
Load current rating: 50A minimum
Output type: AC with zero-cross detection
Input voltage range: Must accommodate 4-32VDC control signal
Load voltage range: Must support 48-660V operation
Termination style: Screw Terminal
RoHS compliance status

Two substitute parts meet these criteria with noted parameter variations:

84140603N (Crouzet GN2 Series): Maintains identical electrical specifications and load ratings. Differs in package format (Module vs. Hockey Puck) and mounting flexibility (Chassis Mount or Panel Mount vs. Chassis Mount only). Packaging is Box format.

ASR-SID480D50ZL-S (Altran Magnetics SID Series): Provides equivalent 50A load current and dual SPST-NO configuration. Operates within a reduced input voltage range (4-15VDC vs. 4-32VDC) and reduced load voltage range (24-530V vs. 48-660V). Package format is Module with Box packaging.

Parameter Comparison

Parameter	CC4850W4V (Sensata)	84140603N (Crouzet)	ASR-SID480D50ZL-S (Altran)
Circuit Configuration	SPST-NO (1 Form A) x 2	SPST-NO (1 Form A) x 2	SPST-NO (1 Form A) x 2
Output Type	AC, Zero Cross	AC, Zero Cross	AC, Zero Cross
Input Voltage Range	4 - 32VDC	4 - 32VDC	4 - 15VDC
Load Voltage Range	48 - 660V	48 - 660V	24 - 530V
Load Current	50A	50A	50A
Termination Style	Screw Terminal	Screw Terminal	Screw Terminal
Package Type	Hockey Puck	Module	Module
Mounting Type	Chassis Mount	Chassis Mount or Panel Mount	Chassis Mount
Product Status	Active	Active	Active
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

84140603N (Crouzet GN2 Series) is the primary substitute when package format flexibility is acceptable. This part maintains full electrical equivalence across all specified parameters, including the complete 4-32VDC input range and 48-660V load voltage range. The Module package format and dual mounting options (Chassis or Panel Mount) provide installation flexibility beyond the original Hockey Puck design. ROHS3 compliance exceeds the base RoHS requirement. This part is recommended for applications where the load voltage and input control voltage specifications of the original design are non-negotiable.

ASR-SID480D50ZL-S (Altran Magnetics SID Series) serves as a secondary substitute only when application requirements permit reduced voltage ranges. The restricted input voltage range (4-15VDC maximum vs. 4-32VDC) and reduced load voltage ceiling (530V maximum vs. 660V) limit this part to applications operating within these narrower specifications. This substitution is valid only when the system design confirms that control signals remain below 15VDC and load voltages do not exceed 530V. ROHS3 compliance and Active product status are maintained.

Frequently Asked Questions (FAQ)

Q: Can 84140603N replace CC4850W4V in all applications?

A: Yes, provided the application uses Chassis Mount or Panel Mount configurations. The 84140603N maintains identical electrical specifications (4-32VDC input, 48-660V load voltage, 50A current) and dual SPST-NO channel configuration. The Module package format is mechanically different from the Hockey Puck but functionally equivalent for screw terminal connections.

Q: What are the voltage limitations of ASR-SID480D50ZL-S?

A: The ASR-SID480D50ZL-S operates with a maximum input voltage of 15VDC (vs. 32VDC for the original) and a maximum load voltage of 530V (vs. 660V for the original). This part is suitable only for applications where both control and load voltages remain within these reduced ranges.

Q: Are all substitute parts RoHS compliant?

A: Yes. The original CC4850W4V is RoHS Compliant. Both substitutes (84140603N and ASR-SID480D50ZL-S) are ROHS3 Compliant, which represents an enhanced compliance standard.

Q: What is the difference between Hockey Puck and Module packages?

A: Hockey Puck (CC4850W4V) and Module (84140603N, ASR-SID480D50ZL-S) are different physical form factors. Both use screw terminal connections and support the same electrical specifications where applicable. Module packages typically offer greater mounting flexibility, including panel mount options.

Q: Can I use ASR-SID480D50ZL-S if my system operates at 25VDC input?

A: No. The ASR-SID480D50ZL-S maximum input voltage is 15VDC. A 25VDC input signal exceeds this specification. Use 84140603N or the original CC4850W4V for this application.

Q: Are screw terminal connections identical across all three parts?

A: Yes. All three parts (CC4850W4V, 84140603N, ASR-SID480D50ZL-S) use Screw Terminal termination style, ensuring compatible wiring connections.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message