CBRLD1-06 TR13 Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The CBRLD1-06 TR13 is a single-phase bridge rectifier manufactured by Central Semiconductor Corp, rated for 600 V peak reverse voltage and 1 A average rectified current in a 4-LPDIP surface mount package. This component is classified as obsolete, making identification of active equivalent and substitute parts essential for ongoing production and maintenance applications. Equivalent parts must maintain identical electrical performance and mechanical compatibility while offering current availability and active product status.

Substiute Parts

CBRLD1-06 TR13

Central Semiconductor CorpIn Stock: 893CBRLD1-06 TR13 Datasheet

Current PartRFQ

ABS6U

SMC Diode SolutionsIn Stock: 24623ABS6U Datasheet

MFR RecommendedRFQ

LB6SL

Good-Ark SemiconductorIn Stock: 8997LB6SL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CBRLD1-06 TR13 are classified based on strict electrical and mechanical parameter matching:

MFR Recommended Substitute: ABS6U This part is designated as the manufacturer-recommended substitute. It maintains all critical electrical parameters: 600 V peak reverse voltage, 1 A average rectified current, single-phase bridge rectifier topology, and identical operating temperature range. The package configuration (4-SMD, Gull Wing) and mounting type (surface mount) are identical. The forward voltage specification differs slightly (1.1 V @ 1 A versus 1 V @ 1 A), and reverse leakage is lower (5 µA @ 600 V versus 10 µA @ 600 V), both of which represent improved performance characteristics. ABS6U is active product status with ROHS3 compliance.

Parametric Equivalent: LB6SL This part matches all electrical parameters identically to the original CBRLD1-06 TR13: 600 V peak reverse voltage, 1 A average rectified current, 1 V forward voltage @ 1 A, and 10 µA reverse leakage @ 600 V. The package and mounting specifications are identical (4-SMD, Gull Wing surface mount). LB6SL is active product status with ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

Both ABS6U and LB6SL are suitable replacements for the obsolete CBRLD1-06 TR13 based on electrical and mechanical parameter equivalence.

ABS6U is the manufacturer-recommended substitute with active product status and ROHS3 compliance. Forward voltage is marginally higher (1.1 V versus 1 V), and reverse leakage is lower (5 µA versus 10 µA). These characteristics represent improved performance in a production environment. Availability is high (24,540 pcs in stock).

LB6SL provides parametric equivalence with identical electrical specifications to the original part, including forward voltage (1 V @ 1 A) and reverse leakage (10 µA @ 600 V). This part is active product status with ROHS3 compliance and adequate availability (8,950 pcs in stock).

Selection between these two parts depends on application requirements: ABS6U for designs benefiting from lower reverse leakage and higher forward voltage tolerance, or LB6SL for applications requiring exact electrical parameter matching to the original specification.

Frequently Asked Questions (FAQ)

Q: Can ABS6U be used as a direct replacement for CBRLD1-06 TR13? A: Yes. ABS6U maintains all critical electrical parameters (600 V, 1 A, single-phase bridge rectifier) and identical package configuration (4-SMD, Gull Wing). The forward voltage specification is 1.1 V versus 1 V, and reverse leakage is lower at 5 µA, both acceptable variations for standard bridge rectifier applications.

Q: What is the difference between ABS6U and LB6SL? A: Both parts are electrically equivalent to the original CBRLD1-06 TR13. LB6SL provides exact parameter matching (1 V forward voltage, 10 µA reverse leakage). ABS6U has slightly higher forward voltage (1.1 V) and lower reverse leakage (5 µA). Both use identical 4-SMD, Gull Wing packaging.

Q: Are both substitute parts ROHS3 compliant? A: Yes. Both ABS6U and LB6SL are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: Will the substitute parts fit the existing PCB layout? A: Yes. Both ABS6U and LB6SL use identical 4-SMD, Gull Wing package configuration and surface mount mounting type as the original CBRLD1-06 TR13. No PCB redesign is required.

Q: Which part should be selected for new designs? A: Either ABS6U or LB6SL is suitable for new designs. ABS6U is the manufacturer-recommended option with higher availability. LB6SL provides exact electrical parameter matching to the original specification.