CB10JB22R0 Equivalent & Substitute Parts Reference

Part Overview

The CB10JB22R0 is a 22 Ohm, 5%, 10W axial wirewound resistor manufactured by Stackpole Electronics Inc. This through-hole component features flame-proof and moisture-resistant construction with safety certification. The part is currently active in production with 1002 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory compliance can be maintained across alternative manufacturers.

Substiute Parts

CB10JB22R0

Stackpole Electronics IncIn Stock: 1013CB10JB22R0 Datasheet

Current PartRFQ

SQPW1022RJ

TE Connectivity Passive ProductIn Stock: 2424SQPW1022RJ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CB10JB22R0 is determined by the following critical parameters:

• Resistance value: 22 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 10W (exact match required)
• Composition: Wirewound (exact match required)
• Package: Axial through-hole (exact match required)
• Features: Flame proof, moisture resistant, safety certification (exact match required)
• Regulatory compliance: ROHS3 compliant (exact match required)

The SQPW1022RJ from TE Connectivity Passive Product meets all substitution criteria with identical electrical specifications and equivalent mechanical packaging.

Parameter Comparison

Engineering Selection Recommendations

Both CB10JB22R0 and SQPW1022RJ are active production components with ROHS3 compliance and REACH unaffected status. Selection between these parts is based on availability and application-specific thermal requirements. The CB10JB22R0 supports operation to 275°C with a temperature coefficient of ±200ppm/°C, while the SQPW1022RJ operates to 250°C with ±300ppm/°C. Physical dimensions differ slightly; verify PCB layout compatibility before substitution. Both parts maintain identical electrical performance for 22 Ohm, 5%, 10W applications.

Frequently Asked Questions (FAQ)

Q: Can SQPW1022RJ replace CB10JB22R0 in all applications? A: SQPW1022RJ is electrically equivalent with identical resistance, tolerance, and power rating. Verify operating temperature requirements and PCB layout constraints, as physical dimensions differ slightly.

Q: What are the key differences between these parts? A: Temperature coefficient differs (±200ppm/°C vs ±300ppm/°C), maximum operating temperature differs (275°C vs 250°C), and physical cross-sectional dimensions vary slightly while maintaining the same 1.890" length.

Q: Are both parts RoHS compliant? A: Yes, both CB10JB22R0 and SQPW1022RJ are ROHS3 compliant and REACH unaffected.

Q: Do these parts have identical axial packaging? A: Both use axial through-hole packaging with 1.890" length. Cross-sectional dimensions differ; verify PCB hole spacing and component clearance before substitution.

Q: What determines substitution eligibility for this resistor? A: Substitution requires matching resistance value (22 Ohms), tolerance (±5%), power rating (10W), wirewound composition, axial package type, flame-proof and moisture-resistant features, and ROHS3 compliance.