CB10220607 Equivalent & Substitute Parts

Part Overview

The CB10220607 is a 6-circuit barrier block connector manufactured by Eaton - Electronics Division, designed for through-hole mounting applications. This component features a 0.325" (8.26mm) pitch with screw termination and captive plate assembly on the top and PC pin termination on the bottom. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility within specified electrical and mechanical parameters.

Substiute Parts

CB10220607

Eaton - Electronics DivisionIn Stock: 1177CB10220607 Datasheet

Current PartRFQ

CB11220607

Eaton - Electronics DivisionIn Stock: 937CB11220607 Datasheet

SimilarRFQ

4PCV-06-006

TE Connectivity AMP ConnectorsIn Stock: 7644PCV-06-006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CB10220607 is determined by strict alignment with the following critical parameters:

Primary Matching Criteria:

• Terminal block type: Barrier Block
• Number of circuits: 6
• Pitch: 0.325" (8.26mm)
• Number of rows: 1
• Top termination: Screws with Captive Plate
• Bottom termination: PC Pin
• Barrier type: 3 Wall (Tri)
• Mounting type: Through Hole
• Flammability rating: UL94 V-0

Secondary Compatibility Parameters:

• Wire gauge range must accommodate 14-22 AWG minimum
• Current rating must equal or exceed 20A
• Voltage rating must equal or exceed 250V
• Operating temperature range must encompass -40°C to 105°C

The identified substitute parts CB11220607 and 4PCV-06-006 satisfy all primary matching criteria. Variations in secondary parameters are documented in the comparison table below.

Parameter Comparison

Engineering Selection Recommendations

CB11220607 (Eaton - Electronics Division, Magnum® CB11 Series)

This substitute is an active product from the same manufacturer as the main part. It maintains identical mechanical and electrical interface specifications. The CB11220607 operates at a higher voltage rating (300V versus 250V) and extended temperature range (-40°C to 120°C versus -40°C to 105°C), providing enhanced performance margins. The current rating is reduced to 15A, which is below the original 20A specification. This part is RoHS non-compliant. Selection of this substitute is appropriate when the 15A current rating satisfies application requirements and RoHS compliance is not mandated.

4PCV-06-006 (TE Connectivity AMP Connectors, #4 Buchanan Series)

This substitute is an active product from an alternative manufacturer. It maintains identical mechanical interface specifications and matches the original 20A current rating. The voltage rating is reduced to 150V, which is below the original 250V specification. The wire gauge range is expanded to 12-22 AWG, providing broader accommodation for conductor sizes. This part is RoHS compliant. Selection of this substitute is appropriate when the 150V voltage rating satisfies application requirements and RoHS compliance is required.

Frequently Asked Questions (FAQ)

Q: Can CB11220607 be used as a direct replacement for CB10220607?

A: CB11220607 is mechanically and electrically compatible for applications operating at 15A or below. The higher voltage rating (300V) and extended temperature range provide additional performance margin. Applications requiring the full 20A current rating of the original part require alternative selection.

Q: Can 4PCV-06-006 be used as a direct replacement for CB10220607?

A: 4PCV-06-006 is mechanically and electrically compatible for applications operating at 150V or below. The matching 20A current rating and expanded wire gauge range (12-22 AWG) provide compatibility for most applications. Applications requiring the full 250V voltage rating of the original part require alternative selection.

Q: What are the critical parameters that must match between the main part and substitute?

A: The following parameters must match exactly: terminal block type (Barrier Block), number of circuits (6), pitch (0.325"), number of rows (1), top termination (Screws with Captive Plate), bottom termination (PC Pin), barrier type (3 Wall), mounting type (Through Hole), and flammability rating (UL94 V-0). All identified substitutes satisfy these requirements.

Q: Are there differences in insulation material between the main part and substitutes?

A: Yes. The CB10220607 uses Thermoplastic insulation, while CB11220607 uses Polyamide (PA66) Nylon 6/6, and 4PCV-06-006 uses Polyamide (PA) Nylon. All materials meet UL94 V-0 flammability requirements. Material selection should be verified against specific application environmental and chemical exposure requirements.

Q: What is the impact of the current rating difference in CB11220607?

A: CB11220607 is rated for 15A maximum continuous current, compared to 20A for the original CB10220607. Applications requiring current handling above 15A cannot use this substitute. Applications operating at 15A or below are fully compatible.

Q: What is the impact of the voltage rating difference in 4PCV-06-006?

A: 4PCV-06-006 is rated for 150V maximum, compared to 250V for the original CB10220607. Applications requiring voltage isolation above 150V cannot use this substitute. Applications operating at 150V or below are fully compatible.

Q: Does RoHS compliance status affect substitution eligibility?

A: RoHS compliance is a regulatory and procurement consideration, not a functional compatibility criterion. CB11220607 is RoHS non-compliant, while 4PCV-06-006 is RoHS compliant. Selection depends on applicable regulatory requirements for the end application and market region.

Q: Are the packaging formats different between the main part and substitutes?

A: The main part CB10220607 packaging format is not specified. CB11220607 is supplied in Bulk packaging with 891 pieces in stock. 4PCV-06-006 is supplied in Bulk packaging with 726 pieces in stock. Packaging format does not affect functional compatibility.