CB017C0102JBA Film Capacitor - Equivalent & Substitute Parts

Part Overview

The CB017C0102JBA is a 1000 pF film capacitor manufactured by KYOCERA AVX, designed for general-purpose applications requiring reliable capacitance in surface-mount configurations. This part features a polyester and polyethylene naphthalate (PEN) metallized-stacked dielectric, rated for 25V DC operation in a compact 1206 (3216 Metric) package. The part maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified to address applications requiring higher voltage ratings or alternative sourcing while maintaining identical capacitance, tolerance, package geometry, and thermal characteristics.

Substiute Parts

CB017C0102JBA

KYOCERA AVXIn Stock: 1093CB017C0102JBA Datasheet

Current PartRFQ

CB017D0102JBA

KYOCERA AVXIn Stock: 8116CB017D0102JBA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CB017C0102JBA are identified based on strict electrical and mechanical compatibility criteria. The primary substitution parameter is voltage rating elevation, which allows the substitute part to function in applications requiring higher voltage margins while maintaining all other specifications. Substitution is valid when the following conditions are met:

• Capacitance value remains identical at 1000 pF
• Tolerance specification remains ±5%
• Package / Case designation remains 1206 (3216 Metric)
• Physical dimensions (length, width, height) remain unchanged
• Dielectric material composition remains Polyester, Polyethylene Naphthalate (PEN), Metallized - Stacked
• Operating temperature range remains -55°C ~ 125°C
• Mounting type remains Surface Mount
• Termination type remains Solder Pads
• Series designation remains CB
• RoHS3 compliance and REACH unaffected status are maintained

The CB017D0102JBA qualifies as a direct substitute based on these criteria, with the distinction of providing elevated DC voltage rating (63V) and AC voltage rating (40V) compared to the original part's 25V DC and 16V AC ratings.

Parameter Comparison

Engineering Selection Recommendations

Both the CB017C0102JBA and CB017D0102JBA maintain Active product status with identical compliance certifications. The CB017D0102JBA provides increased voltage headroom with 63V DC and 40V AC ratings, making it suitable for applications where the original 25V DC / 16V AC specification may present insufficient margin. Selection between these parts should be based on circuit voltage requirements and design safety margins. Both parts satisfy ROHS3 compliance and REACH unaffected requirements, ensuring regulatory alignment for current manufacturing standards.

Frequently Asked Questions (FAQ)

Q: Can CB017D0102JBA replace CB017C0102JBA in all applications?

A: The CB017D0102JBA is electrically and mechanically compatible with CB017C0102JBA. The elevated voltage ratings (63V DC vs. 25V DC) provide additional voltage margin. Substitution is valid when circuit design permits the use of a higher-rated component. Physical footprint and mounting characteristics are identical.

Q: What is the primary difference between these two parts?

A: The primary difference is the voltage rating. CB017C0102JBA is rated for 25V DC / 16V AC, while CB017D0102JBA is rated for 63V DC / 40V AC. All other electrical and mechanical parameters, including capacitance (1000 pF), tolerance (±5%), package (1206), and dielectric material, remain identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical dimensions of 0.130" L x 0.063" W (3.30mm x 1.60mm) with a maximum seated height of 0.045" (1.15mm). They are fully compatible for PCB layout and assembly processes.

Q: Do both parts meet current compliance requirements?

A: Yes. Both CB017C0102JBA and CB017D0102JBA are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic component manufacturing and use.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -55°C to 125°C, ensuring consistent performance across thermal extremes.

Q: Are there any moisture sensitivity considerations?

A: Both parts carry Moisture Sensitivity Level (MSL) 3 with a 168-hour floor life rating. Identical handling and storage protocols apply to both components.