CAT16-000J4GLF Equivalent & Substitute Parts

Part Overview

The CAT16-000J4GLF is a 0.0 Ohm jumper resistor network manufactured by Bourns Inc., configured as a 4-resistor isolated array in 1206 (3216 Metric) surface mount packaging. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The part delivers 62.5mW power per element across its isolated resistor configuration and operates across the -55°C to 125°C temperature range.

Substiute Parts

CAT16-000J4GLF

Bourns Inc.In Stock: 45138CAT16-000J4GLF Datasheet

Current PartRFQ

CAT16-000J4LF

Bourns Inc.In Stock: 3153CAT16-000J4LF Datasheet

DirectRFQ

742C083000XP

CTS Resistor ProductsIn Stock: 5201742C083000XP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the CAT16-000J4GLF is determined by strict equivalence across the following critical parameters:

• Resistance value: 0.0 Ohm (Jumper configuration)
• Circuit topology: Isolated 4-resistor network
• Pin count: 8 pins
• Package type: 1206 (3216 Metric) with concave, long side terminals
• Mounting method: Surface mount
• Operating temperature range: -55°C to 125°C minimum
• Regulatory compliance: ROHS3 Compliant

Substitute parts must maintain identical electrical function and mechanical compatibility. Power per element specifications may vary within acceptable tolerances for jumper applications. All identified substitutes meet these criteria.

Parameter Comparison

Engineering Selection Recommendations

CAT16-000J4LF is the primary substitute for CAT16-000J4GLF. Both parts are manufactured by Bourns Inc., share identical electrical and mechanical specifications, and maintain full compatibility. The CAT16-000J4LF carries active product status with current inventory availability, making it the preferred direct replacement.

742C083000XP from CTS Resistor Products is a secondary substitute option. This part maintains electrical equivalence and mechanical compatibility across all critical parameters. The power per element specification is 63mW compared to 62.5mW, representing a negligible difference for jumper applications. The 742C083000XP includes temperature coefficient specification (±200ppm/°C) and automotive AEC-Q200 qualification, providing additional performance documentation. Both substitute parts maintain ROHS3 compliance and MSL 1 rating.

Frequently Asked Questions (FAQ)

Q: Can CAT16-000J4LF directly replace CAT16-000J4GLF in existing designs?

A: Yes. CAT16-000J4LF is electrically and mechanically identical to CAT16-000J4GLF. Both parts feature 0.0 Ohm jumper configuration, 4-resistor isolated array, 8-pin configuration, 1206 package with concave long side terminals, and -55°C to 125°C operating range. The primary difference is product status: CAT16-000J4LF is active with current availability.

Q: What is the difference between CAT16-000J4GLF and 742C083000XP?

A: Both parts are functionally equivalent 0.0 Ohm 4-resistor jumper networks in 1206 packaging with identical pin counts and operating temperature ranges. The 742C083000XP is manufactured by CTS Resistor Products rather than Bourns Inc., and specifies 63mW power per element versus 62.5mW. The 742C083000XP includes documented temperature coefficient (±200ppm/°C) and automotive AEC-Q200 qualification.

Q: Are there packaging differences between these substitutes?

A: CAT16-000J4GLF and CAT16-000J4LF use identical packaging: 1206 (3216 Metric) with concave, long side terminals. The 742C083000XP uses the same package type and terminal configuration. Physical dimensions are equivalent: 0.126" L x 0.061" W (3.20mm x 1.55mm) for Bourns parts and 0.126" L x 0.063" W (3.20mm x 1.60mm) for the CTS part, representing negligible variation within standard manufacturing tolerances.

Q: Do all substitutes meet the same compliance requirements?

A: Yes. CAT16-000J4GLF, CAT16-000J4LF, and 742C083000XP are all ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. All parts are classified under ECCN EAR99.

Q: Which substitute should be selected for new designs?

A: CAT16-000J4LF is recommended for new designs as the direct Bourns equivalent with active product status. For applications requiring automotive qualification or additional performance documentation, 742C083000XP provides equivalent functionality with AEC-Q200 compliance and specified temperature coefficient.