Equivalent & Substitute Parts for CAR0805-1KB1

Part Overview

The CAR0805-1KB1 is a 1 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by Riedon and classified as Active product status, this component is widely used in precision analog circuits, measurement equipment, and signal conditioning applications requiring tight tolerance specifications.

Substitute parts become necessary due to inventory constraints, supply chain disruptions, manufacturing discontinuation, or design optimization requirements. The parts listed below maintain electrical and mechanical compatibility within the specified parameter ranges for this product category.

Key Parameters

Parameter	Value
Resistance	1 kOhms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the CAR0805-1KB1 is determined by the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 1 kOhms
Tolerance: ±0.1% or tighter
Package / Case: 0805 (2012 Metric)
Composition: Thin Film
Operating Temperature Range: -55°C ~ 155°C minimum
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Flexible Parameters (Substitution Allowed):

Power Rating: Equal to or greater than 0.1W
Temperature Coefficient: Equal to or tighter than ±25ppm/°C
Additional Features: Automotive AEC-Q200 certification, Anti-Sulfur coating, or enhanced moisture resistance are acceptable enhancements

The substitute parts are categorized into two groups:

Direct Equivalents maintain identical electrical specifications (0.1W power rating, ±0.1% tolerance, ±25ppm/°C temperature coefficient) with identical or superior physical dimensions and certifications.

Upgrade Equivalents provide enhanced specifications including higher power ratings (0.125W or 0.25W), tighter temperature coefficients (±10ppm/°C or ±15ppm/°C), tighter tolerance (±0.05%), or automotive-grade certifications (AEC-Q200), while maintaining full backward compatibility with the original design.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Temp Coeff (ppm/°C)	Package	Height Max (mm)	Features	Inventory (Pcs)
CAR0805-1KB1	Riedon	1 kOhms	±0.1%	0.1	±25	0805	0.65	—	1074
1-2176092-8	TE Connectivity	1 kOhms	±0.1%	0.25	±25	0805	0.65	—	77190
CPF0805B1K0E	TE Connectivity	1 kOhms	±0.1%	0.1	±25	0805	0.65	—	16647
CPF0805B1K0E1	TE Connectivity	1 kOhms	±0.1%	0.1	±25	0805	0.65	—	9907
RN73C2A1K0BTD	TE Connectivity	1 kOhms	±0.1%	0.1	±10	0805	0.65	—	166605
RNCF0805BTE1K00	Stackpole Electronics	1 kOhms	±0.1%	0.25	±25	0805	0.65	AEC-Q200	3609
AT0805BRD071KL	YAGEO	1 kOhms	±0.1%	0.125	±25	0805	0.60	Anti-Sulfur, AEC-Q200, Moisture Resistant	14443
ERA-6AEB102V	Panasonic	1 kOhms	±0.1%	0.125	±25	0805	0.60	AEC-Q200	169223
ERA-6APB102V	Panasonic	1 kOhms	±0.1%	0.125	±15	0805	0.60	AEC-Q200	7137
ERA-6ARB102V	Panasonic	1 kOhms	±0.1%	0.125	±10	0805	0.60	AEC-Q200	12362
ERA-6ARW102V	Panasonic	1 kOhms	±0.05%	0.125	±10	0805	0.60	AEC-Q200	23920

Engineering Selection Recommendations

Direct Equivalents (Identical Electrical Performance):

CPF0805B1K0E and CPF0805B1K0E1 from TE Connectivity provide identical electrical specifications to the CAR0805-1KB1 with 0.1W power rating and ±0.1% tolerance. Both are ROHS3 compliant and maintain the same operating temperature range. These parts are suitable for direct substitution in applications where the original specification must be preserved exactly.

Enhanced Equivalents with Superior Temperature Stability:

RN73C2A1K0BTD from TE Connectivity offers tighter temperature coefficient (±10ppm/°C versus ±25ppm/°C) while maintaining all other electrical parameters. This part is recommended for precision measurement circuits where temperature drift must be minimized. Inventory availability is significantly higher at 166,605 pieces.

Upgraded Equivalents with Higher Power Dissipation:

1-2176092-8 from TE Connectivity and RNCF0805BTE1K00 from Stackpole Electronics both provide 0.25W (1/4W) power rating, offering 2.5× greater power handling capacity than the original specification. These parts are suitable for applications requiring additional thermal margin or where circuit redesign permits higher power dissipation. RNCF0805BTE1K00 includes AEC-Q200 automotive certification.

Upgraded Equivalents with Enhanced Environmental Performance:

AT0805BRD071KL from YAGEO, ERA-6AEB102V, ERA-6APB102V, ERA-6ARB102V, and ERA-6ARW102V from Panasonic all feature AEC-Q200 automotive qualification and reduced physical height (0.60mm versus 0.65mm). These parts are suitable for automotive applications, harsh environments, or designs requiring enhanced reliability margins. ERA-6ARW102V provides the tightest tolerance specification at ±0.05% with ±10ppm/°C temperature coefficient.

All substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited), and identical package dimensions (0.079" L × 0.049" W) for direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 0.25W rated part for the original 0.1W specification?

A: Yes. The 0.25W parts (1-2176092-8 and RNCF0805BTE1K00) provide higher power dissipation capability and are fully backward compatible. The circuit will operate identically; the higher power rating simply provides additional thermal margin. This substitution is appropriate when inventory of the exact 0.1W specification is unavailable.

Q: What is the difference between direct equivalents and upgrade equivalents?

A: Direct equivalents (CPF0805B1K0E, CPF0805B1K0E1) maintain identical electrical specifications including 0.1W power rating and ±25ppm/°C temperature coefficient. Upgrade equivalents provide enhanced specifications such as tighter temperature coefficients (±10ppm/°C), higher power ratings (0.125W or 0.25W), tighter tolerances (±0.05%), or automotive certifications (AEC-Q200). Upgrade parts are fully compatible but offer superior performance characteristics.

Q: Are all substitute parts suitable for automotive applications?

A: Only parts explicitly marked with AEC-Q200 certification are qualified for automotive use: RNCF0805BTE1K00, AT0805BRD071KL, ERA-6AEB102V, ERA-6APB102V, ERA-6ARB102V, and ERA-6ARW102V. The original CAR0805-1KB1 and the TE Connectivity parts (1-2176092-8, CPF0805B1K0E, CPF0805B1K0E1, RN73C2A1K0BTD) do not carry automotive certification.

Q: What is the significance of temperature coefficient differences?

A: Temperature coefficient (ppm/°C) specifies how much the resistance value changes per degree Celsius. The original specification is ±25ppm/°C. Parts with ±10ppm/°C or ±15ppm/°C provide tighter temperature stability, reducing resistance drift across the operating temperature range. This is critical for precision analog circuits, measurement equipment, and applications with wide temperature variations.

Q: Can I use ERA-6ARW102V with ±0.05% tolerance instead of ±0.1%?

A: Yes. ERA-6ARW102V provides tighter tolerance (±0.05% versus ±0.1%), meaning the actual resistance value will be closer to the nominal 1 kOhms specification. This part is a direct upgrade suitable for applications requiring higher precision. It is fully compatible with designs specified for ±0.1% tolerance.

Q: Are there physical dimension differences I should consider?

A: The upgrade parts from Panasonic (ERA series) and YAGEO (AT series) have a maximum seated height of 0.60mm compared to 0.65mm for other parts. This 0.05mm difference is negligible for most PCB designs but should be verified if the design has tight vertical clearance constraints or uses automated assembly with height-sensitive equipment.

Q: Which substitute part has the highest inventory availability?

A: ERA-6AEB102V from Panasonic has the highest inventory at 169,223 pieces, followed by RN73C2A1K0BTD from TE Connectivity at 166,605 pieces. Both parts are suitable for immediate procurement without supply chain delays.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message