CA3130AM96 Equivalent & Substitute Parts

Part Overview

The CA3130AM96 is a general-purpose operational amplifier manufactured by Renesas Electronics Corporation, housed in an 8-SOIC surface mount package. This device is classified as obsolete, which necessitates identification of equivalent substitute components for ongoing design requirements and production continuity. The CA3130AM96 delivers a gain-bandwidth product of 15 MHz with a slew rate of 30V/µs, suitable for general-purpose amplification applications requiring moderate bandwidth performance.

Substiute Parts

CA3130AM96

Renesas Electronics CorporationIn Stock: 971CA3130AM96 Datasheet

Current PartRFQ

CA3130AMZ96

Renesas Electronics CorporationIn Stock: 2222CA3130AMZ96 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CA3130AM96 is determined by electrical and mechanical parameter equivalence. The primary substitute identified is the CA3130AMZ96, which maintains identical electrical specifications across all critical performance parameters: slew rate, gain-bandwidth product, input bias current, input offset voltage, supply current, output current capability, and supply voltage range. Both devices operate across the same temperature range (-55°C to 125°C) and utilize the same 8-SOIC package footprint.

The substitution logic is based on the following key parameters:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Slew Rate: 30V/µs
• Gain Bandwidth Product: 15 MHz
• Current - Input Bias: 5 pA
• Voltage - Input Offset: 2 mV
• Current - Supply: 10mA
• Current - Output / Channel: 45 mA
• Voltage - Supply Span: 5V to 16V
• Operating Temperature Range: -55°C to 125°C
• Package / Case: 8-SOIC (0.154", 3.90mm Width)

Parameter Comparison

Engineering Selection Recommendations

The CA3130AMZ96 serves as the direct substitute for the CA3130AM96 based on complete electrical and mechanical parameter equivalence. All critical amplifier specifications—including slew rate, gain-bandwidth product, input bias current, input offset voltage, supply current, output current, and supply voltage range—are identical between the two devices. Both components are housed in the same 8-SOIC surface mount package with identical footprint dimensions.

The primary distinction between these components is product status and compliance certification. The CA3130AM96 is classified as obsolete and carries RoHS non-compliant status, whereas the CA3130AMZ96 is active and ROHS3 compliant. For new designs or production requiring regulatory compliance with current environmental standards, the CA3130AMZ96 is the appropriate selection. The CA3130AMZ96 is supplied in Tape & Reel (TR) packaging format, which is standard for automated assembly processes, whereas the CA3130AM96 is supplied in bulk packaging.

The moisture sensitivity level differs between the two parts (MSL 1 for CA3130AM96 versus MSL 3 for CA3130AMZ96), reflecting different storage and handling requirements. The CA3130AMZ96 requires controlled humidity storage conditions for 168 hours maximum exposure at specified conditions.

Frequently Asked Questions (FAQ)

Q: Can the CA3130AMZ96 be used as a direct replacement for the CA3130AM96 in existing designs?

A: Yes. The CA3130AMZ96 is electrically and mechanically equivalent to the CA3130AM96. All amplifier performance parameters, supply voltage requirements, operating temperature range, and package footprint are identical. The devices are pin-compatible and functionally interchangeable in circuit applications.

Q: What is the difference between the bulk packaging of CA3130AM96 and the Tape & Reel packaging of CA3130AMZ96?

A: Packaging format affects handling and assembly processes. Bulk packaging is suitable for manual assembly or small-quantity applications. Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment used in high-volume production. Both formats contain the same component with identical electrical specifications.

Q: Why is the CA3130AM96 classified as obsolete?

A: The CA3130AM96 is no longer in active production. The CA3130AMZ96 represents the current active product offering from Renesas Electronics Corporation with identical electrical performance and improved compliance status.

Q: Does the difference in RoHS compliance affect circuit performance?

A: RoHS compliance status does not affect electrical performance or circuit functionality. The difference reflects manufacturing process compliance with environmental regulations. The CA3130AMZ96 meets ROHS3 compliance requirements, making it suitable for applications subject to environmental and regulatory standards.

Q: What does Moisture Sensitivity Level (MSL) mean for component handling?

A: MSL indicates the maximum time a component can be exposed to specified humidity conditions before soldering. MSL 1 (CA3130AM96) allows unlimited exposure. MSL 3 (CA3130AMZ96) limits exposure to 168 hours at specified humidity levels. Proper storage in dry conditions or desiccant packaging is required for MSL 3 components to maintain solderability.

Q: Are there any circuit design considerations when substituting CA3130AMZ96 for CA3130AM96?

A: No circuit design modifications are required. The electrical specifications are identical, including slew rate (30V/µs), gain-bandwidth product (15 MHz), input bias current (5 pA), input offset voltage (2 mV), and supply voltage range (5V to 16V). The devices operate across the same temperature range (-55°C to 125°C) and deliver identical output current capability (45 mA per channel).

Q: Is the 8-SOIC package footprint identical between both devices?

A: Yes. Both the CA3130AM96 and CA3130AMZ96 use the 8-SOIC package with identical dimensions (0.154" width, 3.90mm width). PCB layout and footprint designs are directly compatible without modification.