Circuit Breaker CA1-B0-14-650-3C1-C Equivalent & Substitute Parts

Part Overview

The Carling Technologies CA1-B0-14-650-3C1-C is a single-pole circuit breaker featuring magnetic hydraulic delay protection. This component is designed for panel mount applications and operates across AC and DC voltage systems. The breaker is rated for 50A continuous current with 480V AC and 125V DC voltage ratings, utilizing a lever actuator for manual operation control.

This part maintains Active product status with full compliance to RoHS3 and REACH regulations. Substitute parts are identified to address inventory availability, regional certification requirements, or specific voltage rating needs while maintaining core electrical and mechanical compatibility.

Substiute Parts

CA1-B0-14-650-3C1-C

Carling TechnologiesIn Stock: 1134CA1-B0-14-650-3C1-C Datasheet

Current PartRFQ

CA1-B0-14-650-222-D

Carling TechnologiesIn Stock: 803CA1-B0-14-650-222-D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between CA1-B0-14-650-3C1-C and CA1-B0-14-650-222-D is determined by alignment across the following critical parameters:

Matching Parameters (Substitution Basis):

• Manufacturer: Carling Technologies
• Series: C
• Breaker Type: Magnetic (Hydraulic Delay)
• Current Rating: 50A
• Voltage Rating - AC: 480V
• Mounting Type: Panel Mount
• Actuator Type: Lever
• Number of Poles: 1
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Differing Parameter:

• Voltage Rating - DC: 125V (CA1-B0-14-650-3C1-C) versus 80V (CA1-B0-14-650-222-D)
• Approval Agencies: CA1-B0-14-650-222-D includes additional VDE certification

The substitute part CA1-B0-14-650-222-D operates at a lower DC voltage rating (80V versus 125V). This substitution is valid for applications where the DC voltage requirement does not exceed 80V. The substitute part provides broader regional certification coverage through VDE approval.

Parameter Comparison

Engineering Selection Recommendations

Both CA1-B0-14-650-3C1-C and CA1-B0-14-650-222-D maintain Active product status with identical RoHS3 and REACH compliance profiles. Both components carry CCC, CSA, and UL certifications, ensuring regulatory alignment for North American and international markets.

Selection between these parts depends on DC voltage system requirements. The main part CA1-B0-14-650-3C1-C is specified for systems operating at 125V DC. The substitute CA1-B0-14-650-222-D operates at 80V DC maximum and includes additional VDE certification for European market applications.

For applications requiring 125V DC operation, CA1-B0-14-650-3C1-C is the appropriate selection. For applications operating at 80V DC or lower, CA1-B0-14-650-222-D provides equivalent functionality with expanded regional certification coverage.

Frequently Asked Questions (FAQ)

Q: Can CA1-B0-14-650-222-D replace CA1-B0-14-650-3C1-C in all applications?

A: Substitution is valid only when the DC voltage requirement does not exceed 80V. The substitute part has a lower DC voltage rating (80V versus 125V). For systems requiring 125V DC operation, the main part must be used.

Q: What is the primary difference between these two circuit breakers?

A: The DC voltage rating differs. CA1-B0-14-650-3C1-C is rated for 125V DC, while CA1-B0-14-650-222-D is rated for 80V DC. All other electrical and mechanical parameters, including 50A current rating and 480V AC rating, are identical.

Q: Are both parts available in the same packaging?

A: Both parts are supplied in Bulk packaging. CA1-B0-14-650-3C1-C has 1124 pieces in stock, and CA1-B0-14-650-222-D has 716 pieces in stock.

Q: Does the substitute part have additional certifications?

A: Yes. CA1-B0-14-650-222-D includes VDE certification in addition to CCC, CSA, and UL approvals. The main part carries CCC, CSA, and UL certifications.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both CA1-B0-14-650-3C1-C and CA1-B0-14-650-222-D are ROHS3 Compliant and REACH Unaffected.

Q: What is the mounting configuration for both parts?

A: Both parts are Panel Mount with lever actuators and single-pole configuration, suitable for identical installation environments.