Equivalent & Substitute Parts Reference: C9314-02

Part Overview

The Aries Electronics C9314-02 is a DIP socket designed to support 14-position (2 x 7), 0.3" (7.62mm) row spacing, suitable for ICs and transistors. It features gold-plated contacts, through-hole mounting, and a closed-frame structure. The product is obsolete, necessitating the selection of compatible substitute parts for ongoing or future designs requiring similar socket configurations, electrical characteristics, and mechanical fit.

Key Parameters

Parameter	C9314-02 Value
Type	DIP, 0.3" (7.62mm) Row Spacing
Number of Positions or Pins (Grid)	14 (2 x 7)
Pitch - Mating	0.100" (2.54mm)
Contact Finish - Mating	Gold
Contact Finish Thickness - Mating	10.0µin (0.25µm)
Contact Material - Mating	Phosphor Bronze
Mounting Type	Through Hole
Termination	Solder
Pitch - Post	0.100" (2.54mm)
Contact Finish - Post	Gold
Contact Finish Thickness - Post	10.0µin (0.25µm)
Contact Material - Post	Phosphor Bronze
Housing Material	Polyamide (PA46), Nylon 4/6, Glass Filled
Operating Temperature	-55°C ~ 125°C
Termination Post Length	0.140" (3.56mm)
Current Rating (Amps)	1 A
RoHS Status	RoHS non-compliant
Part Status	Obsolete

Substitute Part Grouping Explanation

The substitute part is selected based on exact matching of these key parameters: type (DIP socket with 0.3" row spacing), number of positions (14), pitch (0.100" / 2.54mm), mounting method (through-hole), termination (solder), and suitability for similar operating temperature ranges. Only parts conforming to these criteria and offering equivalent or greater performance characteristics are grouped as direct substitutes.

Parameter Comparison

Parameter	C9314-02 (Aries Electronics)	115-43-314-41-003000 (Mill-Max)
Type	DIP, 0.3" (7.62mm) Row Spacing	DIP, 0.3" (7.62mm) Row Spacing
Number of Positions or Pins (Grid)	14 (2 x 7)	14 (2 x 7)
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Contact Finish - Mating	Gold	Gold
Contact Finish Thickness - Mating	10.0µin (0.25µm)	30.0µin (0.76µm)
Contact Material - Mating	Phosphor Bronze	Beryllium Copper
Mounting Type	Through Hole	Through Hole
Termination	Solder	Solder
Pitch - Post	0.100" (2.54mm)	0.100" (2.54mm)
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C
Current Rating (Amps)	1 A	3 A
RoHS Status	RoHS non-compliant	ROHS3 Compliant
Part Status	Obsolete	Active

Engineering Selection Recommendations

C9314-02 is classified as obsolete and does not comply with RoHS requirements. The substitute part 115-43-314-41-003000 is active and meets ROHS3 compliance. Engineering selections should be based on the substitute’s active status and regulatory compliance, provided all key parameters match as listed. For applications with specific environmental or compliance requirements, select substitute parts with appropriate certifications as identified above.

Frequently Asked Questions (FAQ)

Q: What determines if a DIP socket is a direct substitute for C9314-02?
A: Substitute sockets must have the same number of positions (14), identical row spacing (0.3”/7.62mm), identical pitch (0.100”/2.54mm), mounting type (through-hole), and termination (solder).

Q: Are differences in contact material or housing material relevant in this substitution?
A: Only parameters provided are considered for substitution; any differences are documented for engineering review.

Q: Can the substitute socket be used in RoHS-compliant assemblies?
A: Substitute part 115-43-314-41-003000 is ROHS3 compliant, while C9314-02 is not. Select according to application compliance requirements.

Q: Is the substitute part mechanically interchangeable?
A: Based on the provided grid, row spacing, pitch, and mounting type, mechanical interchangeability meets defined criteria.

Q: What does “Active” versus “Obsolete” status mean for selection?
A: “Active” indicates ongoing manufacturer availability; “Obsolete” signals discontinued status, requiring substitution for new designs and replacement needs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message