Eaton C7024-01 Terminal Block: Equivalent & Substitute Parts

Part Overview

The Eaton C7024-01 is a 1-circuit barrier block connector with stud termination, rated for 115A at 600V, designed for chassis and panel mounting applications. This component is classified as obsolete, making identification of suitable alternatives essential for ongoing system maintenance and new design implementations. The C7024 series provides junction terminal block functionality with dual-wall barrier construction and dual wire entry points.

Substiute Parts

C7024-01

Eaton - Bussmann Electrical DivisionIn Stock: 917C7024-01 Datasheet

Current PartRFQ

C7024-07

Eaton - Bussmann Electrical DivisionIn Stock: 729C7024-07 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the C7024-01 is based on the following critical parameters that must remain consistent:

• Electrical Performance: Current rating (115A), voltage rating (600V), and wire gauge compatibility (2-8 AWG)
• Mechanical Interface: Stud termination on both top and bottom, dual-wall barrier construction, and chassis/panel mounting capability
• Environmental Compliance: UL94 V-0 flammability rating, operating temperature of 130°C, and RoHS compliance
• Base Series Compatibility: All substitutes must belong to the Eaton C7024 base product family

The C7024-07 is identified as a manufacturer-recommended substitute within the same product series, maintaining electrical and mechanical compatibility while offering expanded circuit capacity.

Parameter Comparison

Engineering Selection Recommendations

The C7024-07 is the manufacturer-recommended substitute for the obsolete C7024-01. Both components maintain identical electrical ratings (115A, 600V), mechanical termination (stud-to-stud), and environmental compliance (UL94 V-0, 130°C operating temperature). The primary difference is circuit count: the C7024-07 provides 7 circuits with 0.750" (19.05mm) pitch spacing, compared to the single circuit of the C7024-01.

Selection of the C7024-07 is appropriate for applications requiring multi-circuit junction block functionality within the same electrical and thermal envelope. The active product status of the C7024-07 ensures ongoing availability and supply chain continuity. Both components are RoHS compliant and suitable for industrial power distribution applications.

Frequently Asked Questions (FAQ)

Q: Can the C7024-07 directly replace the C7024-01 in existing installations?

A: Direct mechanical and electrical replacement is possible due to identical stud termination, current rating, voltage rating, and operating temperature. However, the C7024-07 provides 7 circuits versus 1 circuit in the C7024-01. Physical space and mounting configuration must be verified for the larger multi-circuit block.

Q: What is the pitch specification for the C7024-07?

A: The C7024-07 has a pitch of 0.750" (19.05mm) between circuits. The C7024-01 does not specify a pitch value due to its single-circuit design.

Q: Are both parts RoHS compliant?

A: Yes, both the C7024-01 and C7024-07 are RoHS compliant and carry UL94 V-0 flammability ratings.

Q: What is the wire gauge range for both components?

A: Both the C7024-01 and C7024-07 accept wire gauges from 2 to 8 AWG.

Q: Why is the C7024-01 classified as obsolete?

A: The C7024-01 is obsolete and no longer in active production. The C7024-07 and other variants in the active C7024 series are the current offerings from Eaton - Bussmann Electrical Division.

Q: Are there inventory considerations between these parts?

A: The C7024-01 has 859 pieces in stock as new original inventory. The C7024-07 has 666 pieces in stock. Availability should be confirmed with the supplier for long-term procurement planning.