C503C-ACS-CYCZA252 Equivalent & Substitute Parts

Part Overview

The C503C-ACS-CYCZA252 is an amber LED indicator with 5mm round through-hole packaging, manufactured by CreeLED, Inc. This component operates at 2.1V forward voltage with a 20mA test current and delivers 8650mcd luminous intensity at a 591nm dominant wavelength. The device features a clear, domed lens and is rated for 30° viewing angle. Product status is Active with full RoHS compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this LED category, enabling design flexibility and supply chain optimization.

Substiute Parts

C503C-ACS-CYCZA252

CreeLED, Inc.In Stock: 747C503C-ACS-CYCZA252 Datasheet

Current PartRFQ

C503B-ACS-CY0Z0252-030

CreeLED, Inc.In Stock: 5297C503B-ACS-CY0Z0252-030 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The C503B-ACS-CY0Z0252-030 qualifies as a parametric equivalent based on the following critical parameters:

• Color & Wavelength: Both parts emit amber light at 591nm dominant wavelength
• Electrical Characteristics: Identical forward voltage (2.1V) and test current (20mA)
• Mechanical Form Factor: Both feature 5mm round domed clear lenses with radial through-hole mounting
• Viewing Angle: Both rated at 30° viewing angle
• Compliance & Certifications: Both are RoHS Compliant, REACH Unaffected, and carry MSL 1 rating

The primary differences are packaging format (Tape & Box vs. Cut Tape) and luminous intensity variance (8650mcd vs. 8930mcd), which fall within acceptable tolerance ranges for amber LED indication applications.

Parameter Comparison

Engineering Selection Recommendations

Both C503C-ACS-CYCZA252 and C503B-ACS-CY0Z0252-030 are Active products with identical compliance certifications (RoHS Compliant, REACH Unaffected). Selection between these parts should be based on:

• Packaging Requirements: Choose C503C-ACS-CYCZA252 for Tape & Box format; select C503B-ACS-CY0Z0252-030 for Cut Tape format
• Luminous Intensity Tolerance: The C503B variant provides slightly higher brightness (8930mcd vs. 8650mcd), acceptable for applications where increased visibility is beneficial
• Height Tolerance: Both parts meet through-hole PCB mounting with minimal height variance (12.80mm vs. 12.70mm)
• Supply Availability: C503B-ACS-CY0Z0252-030 shows higher inventory availability (5239 pcs vs. 655 pcs)

Frequently Asked Questions (FAQ)

Q: Can C503B-ACS-CY0Z0252-030 directly replace C503C-ACS-CYCZA252 in existing designs?

A: Yes. Both parts share identical electrical characteristics (2.1V forward voltage, 20mA test current), optical properties (591nm amber, 30° viewing angle), and mechanical form factor (5mm round through-hole radial). The primary difference is packaging format and a minor luminous intensity increase in the C503B variant.

Q: What is the significance of the packaging difference between Tape & Box and Cut Tape?

A: Tape & Box (TB) packaging is suitable for automated assembly lines with reel-fed pick-and-place equipment. Cut Tape (CT) packaging provides individual tape segments for lower-volume manual assembly or component kitting. Both formats contain identical components; selection depends on assembly process requirements.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts carry identical certifications: RoHS Compliant, REACH Unaffected, MSL 1 (Unlimited), ECCN EAR99, and HTSUS 8541.41.0000.

Q: How does the luminous intensity difference affect circuit design?

A: The C503B variant (8930mcd) provides approximately 3.2% higher brightness than the C503C variant (8650mcd). This difference is negligible for standard indication applications and does not require circuit redesign. Both parts operate at identical voltage and current specifications.

Q: Can these parts be mixed in the same production batch?

A: Yes, provided the application tolerates the minor luminous intensity variance and packaging format differences do not conflict with assembly equipment specifications.