Equivalent & Substitute Parts for C336C104K5G5TA

Part Overview

The C336C104K5G5TA is a 0.1 µF radial ceramic capacitor manufactured by KEMET, rated for 50V with C0G/NP0 temperature coefficient and ±10% tolerance. This component belongs to the GoldMax 300 Comm C0G series and is designed for general-purpose applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. The part is Active in product status and ROHS3 compliant. Equivalent and substitute parts are identified based on matching capacitance value, temperature coefficient, mounting type, and package configuration while allowing for controlled variations in voltage rating and tolerance specifications.

Substiute Parts

C336C104K5G5TA

KEMETIn Stock: 1052C336C104K5G5TA Datasheet

Current PartRFQ

C333C104F5G5TA

KEMETIn Stock: 1276C333C104F5G5TA Datasheet

UpgradeRFQ

C333C104J2G5TA

KEMETIn Stock: 1450C333C104J2G5TA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the C336C104K5G5TA is based on the following criteria:

Primary Matching Requirements (Non-Negotiable):

• Capacitance: 0.1 µF (exact match)
• Temperature Coefficient: C0G/NP0 (exact match)
• Mounting Type: Through Hole Radial (exact match)
• Package Dimensions: 0.280" L x 0.160" W with 0.200" lead spacing (exact match)
• Operating Temperature Range: -55°C ~ 125°C (exact match)

Allowable Variation Parameters:

• Voltage Rating: Substitute parts may have equal or higher voltage ratings
• Tolerance: Substitute parts may have equal or tighter tolerance specifications

Identified Substitute Parts:

1. C333C104F5G5TA – Tighter tolerance upgrade (±1% vs ±10%), same voltage rating (50V)
2. C333C104J2G5TA – Higher voltage rating upgrade (200V vs 50V), tighter tolerance (±5% vs ±10%)

Both substitutes maintain identical capacitance, temperature coefficient, mounting configuration, and physical dimensions as the main part.

Parameter Comparison

Engineering Selection Recommendations

C333C104F5G5TA Selection Criteria:

• Use when tighter capacitance tolerance (±1%) is required for precision circuit applications
• Maintains identical voltage rating (50V) and physical footprint
• All three parts are Active products with ROHS3 compliance and REACH unaffected status
• Direct PCB footprint compatibility with no layout modifications required

C333C104J2G5TA Selection Criteria:

• Use when higher voltage margin is required (200V rating vs 50V)
• Provides enhanced reliability in circuits with potential voltage transients or overvoltage conditions
• Maintains identical physical dimensions and lead spacing
• All three parts are Active products with ROHS3 compliance and REACH unaffected status
• Direct PCB footprint compatibility with no layout modifications required

General Selection Logic: All three parts share identical capacitance (0.1 µF), temperature coefficient (C0G/NP0), mounting configuration (Through Hole Radial), and physical dimensions. Selection between them depends on application-specific requirements for tolerance tightness and voltage headroom. All parts maintain Active product status and full regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can C333C104F5G5TA replace C336C104K5G5TA in any application? A: Yes, C333C104F5G5TA is a direct substitute. It provides tighter tolerance (±1% vs ±10%) while maintaining the same 50V rating, capacitance value, temperature coefficient, and physical footprint. No PCB modifications are required.

Q: What is the primary difference between C333C104J2G5TA and the main part? A: C333C104J2G5TA has a higher voltage rating (200V vs 50V) and tighter tolerance (±5% vs ±10%). The capacitance, temperature coefficient, and physical dimensions remain identical. Use this substitute when circuits require higher voltage margin.

Q: Are all three parts physically interchangeable on the PCB? A: Yes. All three parts have identical package dimensions (0.280" L x 0.160" W), lead spacing (0.200"), and height (0.400" max). They use the same Radial Through Hole mounting configuration with Formed Leads - Kinked style.

Q: Do all substitute parts meet the same regulatory requirements? A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. All maintain Active product status.

Q: What determines whether a substitute is acceptable for my application? A: Substitution is determined by matching capacitance (0.1 µF), temperature coefficient (C0G/NP0), mounting type (Through Hole Radial), and physical dimensions. Voltage rating and tolerance may vary as specified in the parameter comparison table.

Q: Can I use C333C104J2G5TA in a circuit designed for 50V operation? A: Yes. C333C104J2G5TA is rated for 200V, which exceeds the 50V requirement. Higher voltage-rated capacitors operate safely at lower voltages. The substitute provides additional voltage margin without affecting circuit function.

Q: Are there inventory considerations when selecting a substitute? A: Current inventory levels are: C336C104K5G5TA (962 Pcs), C333C104F5G5TA (1232 Pcs), and C333C104J2G5TA (1390 Pcs). All parts are available as new original stock in bulk packaging.