C325C223F3G5TA Equivalent & Substitute Parts

Part Overview

The C325C223F3G5TA is a 0.022 µF ceramic capacitor manufactured by KEMET, rated for 25V with C0G/NP0 temperature coefficient and ±1% tolerance. This radial through-hole component belongs to the GoldMax 300 Comm C0G series and is currently in active production status with 758 units in stock. The part is designed for general-purpose applications requiring stable capacitance across temperature ranges from -55°C to 125°C. Equivalent and substitute parts are identified when circuit designs require higher voltage ratings, different package dimensions, or alternative sourcing while maintaining the same capacitance value and tolerance specifications.

Substiute Parts

C325C223F3G5TA

KEMETIn Stock: 795C325C223F3G5TA Datasheet

Current PartRFQ

C333C223F1G5TA

KEMETIn Stock: 2177C333C223F1G5TA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the C325C223F3G5TA is based on maintaining electrical equivalence while allowing for enhanced specifications. The primary substitution criterion is capacitance value (0.022 µF) combined with tolerance (±1%) and temperature coefficient (C0G/NP0). Voltage rating substitution follows the principle that a higher-rated component can replace a lower-rated one when the circuit design permits increased physical dimensions and cost. Lead spacing must remain constant at 0.200" (5.08mm) to ensure PCB footprint compatibility. Temperature coefficient and operating temperature range must be maintained to preserve circuit performance across environmental conditions. RoHS3 compliance is mandatory for all substitutes to meet regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

The C333C223F1G5TA serves as a direct electrical substitute for the C325C223F3G5TA when circuit requirements permit higher voltage rating and increased physical dimensions. Both parts maintain identical capacitance (0.022 µF), tolerance (±1%), temperature coefficient (C0G/NP0), and operating temperature range (-55°C to 125°C). The substitute's 100V rating provides enhanced voltage margin compared to the main part's 25V rating, making it suitable for applications where circuit voltage may fluctuate or where design margin is required. Lead spacing remains constant at 0.200" (5.08mm), ensuring PCB footprint compatibility without redesign.

The primary consideration for substitution is physical size. The C333C223F1G5TA measures 0.280" L x 0.160" W with a maximum seated height of 0.400", compared to the main part's 0.200" L x 0.125" W with 0.300" height. PCB layout must accommodate these larger dimensions, particularly in height-constrained applications or densely populated boards. Both parts are ROHS3 compliant and belong to the active GoldMax 300 Comm C0G series, ensuring consistent manufacturing quality and long-term availability.

Frequently Asked Questions (FAQ)

Q: Can C333C223F1G5TA replace C325C223F3G5TA in any 25V circuit?

A: Electrical substitution is valid. The C333C223F1G5TA's 100V rating exceeds the 25V requirement, and all electrical parameters (capacitance, tolerance, temperature coefficient, operating range) are identical. Physical dimensions must be verified for PCB compatibility.

Q: What is the primary difference between these two parts?

A: The main differences are voltage rating (25V vs. 100V) and physical dimensions. The C333C223F1G5TA is larger in length, width, and height. Capacitance, tolerance, and temperature characteristics are identical.

Q: Does the larger size of C333C223F1G5TA affect performance?

A: Physical size does not affect electrical performance. Both parts deliver identical capacitance, tolerance, and temperature stability. Size differences result from the higher voltage rating design, which requires larger ceramic material volume.

Q: Are both parts RoHS compliant?

A: Yes. Both C325C223F3G5TA and C333C223F1G5TA are ROHS3 compliant and meet current regulatory requirements for electronic component manufacturing.

Q: Can I use C325C223F3G5TA in a circuit designed for C333C223F1G5TA?

A: No. The C325C223F3G5TA has a lower voltage rating (25V vs. 100V). Using it in a circuit designed for higher voltage tolerance may result in component failure or reduced reliability.

Q: What is the lead spacing for both parts?

A: Both parts have identical lead spacing of 0.200" (5.08mm), ensuring PCB footprint compatibility when substituting between them.

Q: Are both parts currently in production?

A: Yes. Both C325C223F3G5TA and C333C223F1G5TA are active products in the KEMET GoldMax 300 Comm C0G series with current manufacturing support.