C14D32P-C3A Rotary Encoder Optical 32PPR Equivalent & Substitute Parts

Part Overview

The C14D32P-C3A is an optical rotary encoder manufactured by CUI Devices, designed for applications requiring precise rotational position feedback. This encoder delivers 32 pulses per revolution with quadrature (incremental) output, operates at 5V supply voltage, and features a vertical orientation with panel and PCB through-hole mounting capability. The part is currently active in production with 699 units in stock. Equivalent and substitute parts are identified when design requirements allow for variations in resolution, packaging, or specific mechanical configurations while maintaining core functional compatibility.

Substiute Parts

C14D32P-C3A

CUI DevicesIn Stock: 804C14D32P-C3A Datasheet

Current PartRFQ

C14D16P-C3

CUI DevicesIn Stock: 1562C14D16P-C3 Datasheet

SimilarRFQ

C14D32P-C3

CUI DevicesIn Stock: 2016C14D32P-C3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the C14D32P-C3A are identified based on the following criteria:

Maintained Parameters (Required for Substitution):

• Encoder Type: Optical
• Output Type: Quadrature (Incremental)
• Voltage - Supply: 5V
• Actuator Type: 1/4" Dia Flatted End
• Detent: Yes
• Built in Switch: Yes
• Mounting Type: Panel, PCB Through Hole
• Orientation: Vertical
• Termination Style: PC Pin
• Rotational Life (Cycles Min): 1M
• Series: C14
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

Variable Parameters (Allowed to Differ):

• Pulses per Revolution
• Packaging format
• Specific part number suffix

Two substitute parts meet these criteria with variations in resolution and packaging.

Parameter Comparison

Engineering Selection Recommendations

C14D32P-C3 (Direct Equivalent): This part is functionally identical to the C14D32P-C3A, maintaining 32 pulses per revolution resolution. The primary difference is packaging format (Box vs. Box designation). Both parts carry identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and MSL 1 (Unlimited). Product status is Active for both. This part is suitable for direct substitution when packaging specifications do not impose constraints.

C14D16P-C3 (Lower Resolution Alternative): This part operates at 16 pulses per revolution, providing half the resolution of the C14D32P-C3A. All other electrical, mechanical, and compliance parameters remain identical. This encoder is suitable only for applications where lower rotational resolution is acceptable. The part is packaged in Tray format and carries identical compliance certifications. Selection of this part requires confirmation that system firmware or mechanical design can accommodate 16 PPR output instead of 32 PPR.

Both substitute parts maintain Active product status and full compliance with RoHS3 and REACH requirements, ensuring long-term availability and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can C14D16P-C3 replace C14D32P-C3A in all applications?

A: No. The C14D16P-C3 provides 16 pulses per revolution instead of 32. Substitution is only valid if the application firmware, control logic, or mechanical design can operate with half the rotational resolution. Direct replacement without system modification will result in reduced position feedback accuracy.

Q: What is the difference between C14D32P-C3A and C14D32P-C3?

A: These parts are functionally equivalent. Both deliver 32 pulses per revolution with identical electrical specifications, mechanical configuration, and compliance certifications. The primary distinction is packaging format. Both are suitable for direct substitution.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three encoders share identical mounting type (Panel, PCB Through Hole), orientation (Vertical), actuator type (1/4" Dia Flatted End), and termination style (PC Pin). PCB layout compatibility is maintained across all three parts.

Q: Do packaging differences affect electrical performance?

A: No. Packaging format (Box vs. Tray) does not affect electrical output, supply voltage, or signal characteristics. Packaging selection is driven by inventory management, shipping requirements, and component handling procedures.

Q: Are all substitute parts currently in production?

A: Yes. All three parts—C14D32P-C3A, C14D32P-C3, and C14D16P-C3—carry Active product status, confirming ongoing manufacturing and availability.

Q: What compliance certifications apply to all substitute parts?

A: All three encoders are ROHS3 Compliant, REACH Unaffected, and carry MSL 1 (Unlimited) rating. These certifications ensure regulatory compliance and unlimited shelf life without moisture sensitivity constraints.