C0805C369C1GAC7800 Equivalent & Substitute Parts

Part Overview

The C0805C369C1GAC7800 is a 3.6 pF ceramic capacitor manufactured by KEMET, designed for general-purpose applications requiring stable capacitance across a wide temperature range. This surface-mount multilayer ceramic capacitor (MLCC) operates at 100V rated voltage with C0G/NP0 temperature coefficient, ensuring minimal capacitance drift from -55°C to 125°C. The component is packaged in 0805 (2012 Metric) form factor and is ROHS3 compliant with MSL 1 rating. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across manufacturers.

Substiute Parts

C0805C369C1GAC7800

KEMETIn Stock: 790C0805C369C1GAC7800 Datasheet

Current PartRFQ

08051A3R6CAT2A

KYOCERA AVXIn Stock: 2496908051A3R6CAT2A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the C0805C369C1GAC7800 are qualified based on strict electrical and mechanical parameter alignment. The substitution criteria are:

Electrical Parameters (Non-negotiable):

• Capacitance value: 3.6 pF
• Tolerance: ±0.25pF
• Voltage rating: 100V minimum
• Temperature coefficient: C0G/NP0 only
• Operating temperature range: -55°C to 125°C minimum

Mechanical Parameters (Non-negotiable):

• Package code: 0805 (2012 Metric)
• Mounting type: Surface Mount MLCC
• Physical dimensions compatible with 0805 footprint

Compliance Parameters:

• RoHS3 compliance required
• MSL 1 rating required
• REACH unaffected status

The substitute part 08051A3R6CAT2A from KYOCERA AVX meets all specified criteria and is therefore qualified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The 08051A3R6CAT2A from KYOCERA AVX qualifies as a direct substitute for the C0805C369C1GAC7800 based on the following engineering criteria:

Electrical Equivalence: Both parts maintain identical capacitance (3.6 pF), tolerance (±0.25pF), voltage rating (100V), and temperature coefficient (C0G/NP0). The operating temperature range is identical at -55°C to 125°C, ensuring performance consistency across all specified environmental conditions.

Mechanical Compatibility: Both components use the 0805 (2012 Metric) package with surface-mount MLCC mounting. Physical dimensions are compatible within standard PCB assembly tolerances. The KYOCERA AVX part exhibits slightly greater thickness (0.94mm vs. 0.88mm), which remains within acceptable limits for standard 0805 footprints.

Compliance Alignment: Both parts maintain ROHS3 compliance, MSL 1 rating, and REACH unaffected status, ensuring regulatory and environmental requirements are met without modification to assembly or storage procedures.

Product Status: Both components are listed as Active products with current manufacturing status, ensuring long-term availability and supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can the 08051A3R6CAT2A replace the C0805C369C1GAC7800 in existing designs?

A: Yes. Both parts meet identical electrical specifications (3.6 pF, ±0.25pF, 100V, C0G/NP0) and are packaged in the same 0805 (2012 Metric) form factor. No design modifications are required.

Q: Are there any dimensional differences that affect PCB assembly?

A: Minor dimensional variations exist. The KYOCERA AVX part is 0.06mm thicker (0.94mm vs. 0.88mm) and 0.01mm longer (2.01mm vs. 2.00mm). These differences are within standard 0805 component tolerances and do not affect PCB assembly or reflow processes.

Q: Do both parts require identical storage and handling procedures?

A: Yes. Both components carry MSL 1 (Unlimited) ratings, eliminating moisture sensitivity concerns. Standard ESD precautions and room-temperature storage apply to both parts without differentiation.

Q: Are there compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical regulatory certifications. No additional compliance documentation is required when substituting between these parts.

Q: What is the basis for qualifying this substitute relationship?

A: Substitution is based strictly on matching electrical parameters (capacitance, tolerance, voltage, temperature coefficient, operating range), mechanical compatibility (package, dimensions, mounting type), and regulatory compliance (RoHS, MSL, REACH). All criteria are met identically or within acceptable engineering tolerances.