BZV85-C13,113 Equivalent & Substitute Parts

Part Overview

The BZV85-C13,113 is a Zener diode manufactured by Nexperia USA Inc., rated at 13 V nominal with 1.3 W maximum power dissipation. The device is packaged in DO-41 axial configuration for through-hole mounting applications. This part is currently Active in product status with full RoHS3 compliance and unlimited moisture sensitivity rating.

Equivalent and substitute parts are identified when design requirements permit tolerance of variations in power rating, impedance characteristics, or package form factor while maintaining the core electrical specifications of 13 V nominal Zener voltage and ±5% tolerance. Substitution becomes necessary when the primary part reaches end-of-life status, inventory constraints occur, or application requirements allow for higher power ratings or alternative package geometries.

Substiute Parts

BZV85-C13,113

Nexperia USA Inc.In Stock: 1094BZV85-C13,113 Datasheet

Current PartRFQ

1N5350BRLG

onsemiIn Stock: 121631N5350BRLG Datasheet

DirectRFQ

2EZ13D5

Microchip TechnologyIn Stock: 22892EZ13D5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the BZV85-C13,113 is based on the following core electrical and mechanical parameters:

Primary Substitution Criteria:

• Zener voltage (Nom): 13 V (fixed requirement)
• Tolerance: ±5% (fixed requirement)
• Mounting type: Through Hole (fixed requirement)
• Operating temperature range: Minimum -65°C to 200°C overlap required

Secondary Substitution Parameters (Allowable Variation):

• Power - Max: 1.3 W or higher
• Impedance (Max): 10 Ohms or lower
• Current - Reverse Leakage: 200 nA or lower
• Voltage - Forward (Vf): 1 V or lower
• Package / Case: DO-41, DO-204AL, or Axial configurations

Substitute parts are classified as follows:

Direct Substitutes: Parts meeting all primary criteria with identical or superior electrical performance characteristics.

Similar Substitutes: Parts meeting all primary criteria with variations in power rating, impedance, or package form factor that remain functionally compatible within the application envelope.

Parameter Comparison

Engineering Selection Recommendations

1N5350BRLG (onsemi) - Direct Substitute

The 1N5350BRLG qualifies as a direct substitute for the BZV85-C13,113. Both devices maintain identical 13 V nominal Zener voltage and ±5% tolerance specifications. The 1N5350BRLG provides superior electrical performance with 5 W maximum power rating (versus 1.3 W), lower impedance of 2.5 Ohms (versus 10 Ohms), and identical operating temperature range of -65°C to 200°C. Both parts are ROHS3 compliant. The 1N5350BRLG is supplied in Axial package configuration and is suitable for applications where higher power dissipation capability is beneficial or where inventory availability of the primary part is constrained. Current inventory of 12,100 units is available.

2EZ13D5 (Microchip Technology) - Similar Substitute

The 2EZ13D5 qualifies as a similar substitute for the BZV85-C13,113. Both devices maintain identical 13 V nominal Zener voltage and ±5% tolerance specifications with through-hole mounting. The 2EZ13D5 provides 2 W maximum power rating (versus 1.3 W) and lower impedance of 5 Ohms (versus 10 Ohms). The operating temperature range of the 2EZ13D5 extends to 150°C maximum (versus 200°C for the main part), representing a constraint in high-temperature applications. The 2EZ13D5 is supplied in DO-204AL (DO-41) package configuration, matching the primary package form factor of the BZV85-C13,113. Critical consideration: The 2EZ13D5 is RoHS non-compliant, which may restrict use in applications requiring RoHS3 certification. Current inventory of 2,209 units is available.

Selection Basis:

• Product Status: All three parts maintain Active product status.
• Compliance: The 1N5350BRLG and BZV85-C13,113 are both ROHS3 compliant. The 2EZ13D5 is RoHS non-compliant and must not be selected for applications with RoHS compliance requirements.
• Regulatory: All parts are REACH Unaffected and classified as EAR99 for export control purposes.
• Inventory: The 1N5350BRLG offers the highest inventory availability at 12,100 units.

Frequently Asked Questions (FAQ)

Q: Can the 1N5350BRLG replace the BZV85-C13,113 in my circuit?

A: Yes. The 1N5350BRLG is a direct substitute. Both devices share identical 13 V nominal Zener voltage, ±5% tolerance, and -65°C to 200°C operating temperature range. The 1N5350BRLG provides higher power rating (5 W versus 1.3 W) and lower impedance (2.5 Ohms versus 10 Ohms), making it suitable for applications where the BZV85-C13,113 is specified. Both parts are ROHS3 compliant.

Q: What is the difference between the 1N5350BRLG and 2EZ13D5?

A: Both are 13 V Zener diodes with ±5% tolerance. The 1N5350BRLG provides 5 W power rating and 2.5 Ohms impedance in Axial package. The 2EZ13D5 provides 2 W power rating and 5 Ohms impedance in DO-204AL (DO-41) package. The 1N5350BRLG operates to 200°C; the 2EZ13D5 operates to 150°C. The 1N5350BRLG is ROHS3 compliant; the 2EZ13D5 is RoHS non-compliant.

Q: Can I use the 2EZ13D5 if my application requires RoHS compliance?

A: No. The 2EZ13D5 is RoHS non-compliant and cannot be used in applications with RoHS3 certification requirements. Select the BZV85-C13,113 or 1N5350BRLG for RoHS-compliant designs.

Q: Does package form factor affect substitution?

A: Package form factor is a mechanical consideration. The BZV85-C13,113 is supplied in DO-41 Axial configuration. The 1N5350BRLG is supplied in T-18 Axial configuration. The 2EZ13D5 is supplied in DO-204AL (DO-41) Axial configuration. All three are through-hole axial devices. Verify PCB footprint compatibility before substitution.

Q: What is the maximum operating temperature for each part?

A: The BZV85-C13,113 and 1N5350BRLG both operate from -65°C to 200°C. The 2EZ13D5 operates from -65°C to 150°C. For applications requiring operation above 150°C, the 2EZ13D5 is not suitable.

Q: Are all three parts REACH compliant?

A: Yes. All three parts (BZV85-C13,113, 1N5350BRLG, and 2EZ13D5) are classified as REACH Unaffected.

Q: What is the impedance difference, and does it matter?

A: The BZV85-C13,113 has maximum impedance of 10 Ohms. The 1N5350BRLG has 2.5 Ohms, and the 2EZ13D5 has 5 Ohms. Lower impedance provides better voltage regulation and faster transient response. Both substitutes offer equal or superior impedance performance.

Q: Which part has the best inventory availability?

A: The 1N5350BRLG has the highest inventory with 12,100 units in stock, followed by the 2EZ13D5 with 2,209 units, and the BZV85-C13,113 with 1,016 units.