BZT52C3V9S RRG Equivalent & Substitute Parts

Part Overview

The BZT52C3V9S RRG is a surface mount Zener diode manufactured by Taiwan Semiconductor Corporation, designed for voltage regulation and protection applications. This component operates at a nominal Zener voltage of 3.9 V with a maximum power dissipation of 200 mW in the SOD-323F package. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, packaging format preferences, or design standardization across manufacturing batches.

Key Parameters

Parameter	Value	Unit
Voltage - Zener (Nominal)	3.9	V
Tolerance	±5%	—
Power - Maximum	200	mW
Impedance (Maximum)	90	Ohms
Current - Reverse Leakage @ 1 V	2.7	µA
Voltage - Forward (Maximum) @ 10 mA	1	V
Operating Temperature Range	-65 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	SOD-323F	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution eligibility for the BZT52C3V9S RRG is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

Nominal Zener voltage: 3.9 V
Maximum power dissipation: 200 mW
Package type: SOD-323F (SC-90)
Mounting configuration: Surface Mount
Operating temperature range: -65°C to 150°C
Reverse leakage current: 2.7 µA @ 1 V
Forward voltage: 1 V @ 10 mA

Tolerance Consideration: Zener voltage tolerance affects circuit precision. The main part specifies ±5% tolerance. Substitute parts with tighter tolerance (±2%) remain functionally compatible as they represent improved specification margins within the same voltage class.

Impedance Variation: Maximum impedance specification of 90 Ohms for the main part and 84 Ohms for onsemi equivalents both satisfy circuit requirements, as lower impedance represents improved performance characteristics.

All identified substitutes maintain identical regulatory compliance (RoHS3, REACH Unaffected, EAR99 classification) and moisture sensitivity rating (MSL 1 - Unlimited).

Parameter Comparison

Parameter	BZT52C3V9S RRG	BZT52C3V9S R9G	MM3Z3V9C	MM3Z3V9B
Manufacturer	Taiwan Semiconductor	Taiwan Semiconductor	onsemi	onsemi
Voltage - Zener (Nom)	3.9 V	3.9 V	3.9 V	3.9 V
Tolerance	±5%	±5%	±5%	±2%
Power - Max	200 mW	200 mW	200 mW	200 mW
Impedance (Max)	90 Ohms	90 Ohms	84 Ohms	84 Ohms
Current - Reverse Leakage @ 1 V	2.7 µA	2.7 µA	2.7 µA	2.7 µA
Voltage - Forward (Max) @ 10 mA	1 V	1 V	1 V	1 V
Operating Temperature	-65 to 150°C	-65 to 150°C	-65 to 150°C	-65 to 150°C
Package / Case	SOD-323F	SOD-323F	SOD-323F	SOD-323F
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

BZT52C3V9S R9G (Taiwan Semiconductor Corporation)

This part is a parametric equivalent to the main part number, differing only in packaging format (Cut Tape & Digi-Reel versus standard reel configuration). Electrical specifications, compliance certifications, and operating characteristics are identical. Selection is appropriate when packaging format aligns with assembly line requirements. Higher inventory availability (10,679 pcs) supports supply chain continuity.

MM3Z3V9C (onsemi)

This part maintains all critical electrical parameters and operates within the same temperature range. The impedance specification of 84 Ohms represents improved performance compared to the 90 Ohms maximum of the main part. Voltage tolerance remains ±5%, matching the original specification. RoHS3 compliance and MSL 1 rating ensure regulatory and environmental compatibility. Selection is appropriate for cross-manufacturer standardization or when onsemi supply chain preference is established.

MM3Z3V9B (onsemi)

This part provides tighter Zener voltage tolerance (±2% versus ±5%), resulting in improved voltage regulation precision. All other electrical parameters, temperature range, and compliance certifications remain equivalent. The 84 Ohms impedance specification provides performance margin improvement. Selection is appropriate for applications requiring enhanced voltage accuracy or when onsemi component standardization is preferred. Lower inventory (5,420 pcs) should be considered in procurement planning.

All substitute parts maintain Active product status and full regulatory compliance (RoHS3, REACH Unaffected, EAR99 classification).

Frequently Asked Questions (FAQ)

Q: Can BZT52C3V9S R9G be used as a direct replacement for BZT52C3V9S RRG?

A: Yes. Both parts are manufactured by Taiwan Semiconductor Corporation with identical electrical specifications, voltage rating, power dissipation, and operating temperature range. The difference is packaging format only (Cut Tape & Digi-Reel versus standard reel). Electrical performance and circuit compatibility are equivalent.

Q: What is the difference between the onsemi MM3Z3V9C and MM3Z3V9B?

A: The primary difference is Zener voltage tolerance. MM3Z3V9C specifies ±5% tolerance (matching the original part), while MM3Z3V9B specifies ±2% tolerance, providing tighter voltage regulation. All other electrical parameters, including power rating, impedance, leakage current, and operating temperature, are identical. Both are functionally compatible with the original part.

Q: Are all substitute parts in the same SOD-323F package?

A: Yes. All listed substitute parts use the SOD-323F package (SC-90 case designation). Physical dimensions, PCB footprint, and reflow soldering profiles are identical across all parts. No layout or assembly modifications are required.

Q: Do the substitute parts have the same compliance certifications?

A: Yes. All substitute parts are RoHS3 compliant, REACH Unaffected, and classified as EAR99. Moisture sensitivity level is MSL 1 (Unlimited) for all parts. Regulatory and environmental requirements are fully satisfied by any substitute selection.

Q: What is the significance of the impedance difference between Taiwan Semiconductor and onsemi parts?

A: The main part specifies maximum impedance of 90 Ohms, while onsemi parts specify 84 Ohms maximum. Lower impedance represents improved dynamic performance and faster transient response. Both specifications satisfy circuit requirements; the onsemi parts provide performance margin improvement without compromising compatibility.

Q: Can I mix different substitute parts in the same circuit board assembly?

A: Yes. All parts meet identical electrical specifications for the 3.9 V Zener voltage class, 200 mW power rating, and operating temperature range. Mixed sourcing from Taiwan Semiconductor and onsemi is electrically compatible. However, manufacturing process consistency may favor single-source selection for critical applications.

Q: Which substitute part should I select for highest voltage accuracy?

A: MM3Z3V9B provides the tightest Zener voltage tolerance at ±2%, compared to ±5% for all other parts. This results in improved voltage regulation precision and reduced tolerance stack-up in multi-stage circuits.

Q: Are there inventory considerations for substitute selection?

A: Yes. BZT52C3V9S R9G has the highest inventory (10,679 pcs), followed by MM3Z3V9C (10,001 pcs) and MM3Z3V9B (5,420 pcs). For high-volume production, BZT52C3V9S R9G or MM3Z3V9C provide better supply availability. MM3Z3V9B should be evaluated for lead time impact in large-quantity orders.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message