BZE6-2RN-F3 Equivalent & Substitute Parts

Part Overview

The BZE6-2RN-F3 is a snap action SPDT switch manufactured by Honeywell Sensing and Productivity Solutions. This chassis-mounted switch is rated for 10A AC at 125V and features a round pin plunger actuator with cable lead termination. The product is Active status with RoHS compliance and IP66 ingress protection rating. Substitute parts are identified when equivalent electrical and mechanical performance parameters align with application requirements, allowing for component interchangeability in circuit designs where the primary part becomes unavailable or when alternative sourcing is necessary.

Substiute Parts

BZE6-2RN-F3

Honeywell Sensing and Productivity SolutionsIn Stock: 1128BZE6-2RN-F3 Datasheet

Current PartRFQ

ZE-Q-2S

Omron Automation and SafetyIn Stock: 1084ZE-Q-2S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BZE6-2RN-F3 is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Circuit configuration must be SPDT
• Switch function must be On-Mom
• AC voltage rating must be 125V minimum
• DC voltage rating must be 125V minimum
• AC current rating must be 10A or greater
• DC current rating must be 500mA or greater

Mechanical Compatibility Requirements:

• Actuator type must be Round (Pin Plunger)
• Mounting type must be Chassis Mount
• Operating temperature range must encompass or exceed -32°C to 71°C

Compliance Requirements:

• RoHS Compliant status required
• Product Status must be Active

The substitute part ZE-Q-2S meets all electrical, mechanical, and compliance criteria. The ZE-Q-2S provides equal or superior electrical ratings (15A AC versus 10A AC) and maintains identical circuit configuration, actuator type, and mounting specifications. Both parts are RoHS compliant and Active status.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (BZE6-2RN-F3): The BZE6-2RN-F3 is the specified component for applications requiring IP66 ingress protection with cable lead termination. This part is Active status with full RoHS compliance and is suitable for environments demanding dust-tight and water-resistant sealing. The cable lead termination provides direct wiring integration without additional terminal hardware.

Substitute Part Selection (ZE-Q-2S): The ZE-Q-2S is a valid substitute when the application permits screw terminal connection and can operate within the -10°C to 80°C temperature range. The substitute part provides higher AC current capacity (15A versus 10A), making it suitable for applications with increased current demands. The IP60 rating is appropriate for dust-tight environments where water resistance is not required. Both parts maintain Active product status and RoHS compliance, ensuring regulatory alignment.

Selection Criteria:

• Use BZE6-2RN-F3 when IP66 protection and cable lead termination are mandatory
• Use ZE-Q-2S when screw terminal connection is acceptable and higher AC current capacity is beneficial
• Verify termination compatibility with circuit board or wiring harness design before substitution
• Confirm operating temperature requirements fall within the selected part's rated range

Frequently Asked Questions (FAQ)

Q: Can the ZE-Q-2S directly replace the BZE6-2RN-F3 in all applications?

A: The ZE-Q-2S is electrically and mechanically compatible for SPDT On-Mom switching functions at 125V. However, termination style differs: the main part uses cable leads while the substitute uses screw terminals. Verify your circuit design accommodates screw terminal connection. Additionally, confirm the application does not require IP66 protection, as the substitute provides IP60 rating.

Q: What is the significance of the different ingress protection ratings?

A: The BZE6-2RN-F3 is rated IP66 (dust-tight and water-resistant), while the ZE-Q-2S is rated IP60 (dust-tight only). IP66 provides protection against water jets and temporary immersion. Select the BZE6-2RN-F3 for applications exposed to moisture or washdown environments. The ZE-Q-2S is suitable for dry, dust-controlled environments.

Q: Are both parts RoHS compliant?

A: Yes, both the BZE6-2RN-F3 and ZE-Q-2S are RoHS compliant. Both parts meet regulatory requirements for restricted substance elimination and are suitable for applications requiring RoHS certification.

Q: What is the difference in current ratings between these parts?

A: The BZE6-2RN-F3 is rated for 10A AC, while the ZE-Q-2S is rated for 15A AC. Both are rated for 500mA DC. The substitute part has higher AC current capacity, making it suitable for applications with increased current demands. The main part is appropriate for applications at or below 10A AC.

Q: How do the operating temperature ranges compare?

A: The BZE6-2RN-F3 operates from -32°C to 71°C, while the ZE-Q-2S operates from -10°C to 80°C. The ranges overlap between -10°C and 71°C. For applications requiring operation below -10°C, the BZE6-2RN-F3 is required. For applications requiring operation above 71°C, the ZE-Q-2S is required.

Q: What termination differences exist between these parts?

A: The BZE6-2RN-F3 features cable leads for direct wiring integration, while the ZE-Q-2S uses screw terminals for connection to terminal blocks or circuit board pads. Cable leads provide integrated wiring, while screw terminals offer modular connection flexibility. Select based on your circuit assembly method.

Q: Are both parts currently available?

A: Yes, both parts are Active status. The BZE6-2RN-F3 has 1073 pieces in stock, and the ZE-Q-2S has 1019 pieces in stock, indicating current availability from the specified inventory.