BZD27C39P RUG Equivalent & Substitute Parts

Part Overview

The BZD27C39P RUG is a Zener diode rated at 39 V nominal voltage with 1 W maximum power dissipation, manufactured by Taiwan Semiconductor Corporation. This component is designed for surface mount applications in the Sub SMA package configuration (DO-219AB). The part is currently in active product status with 866 units in stock.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when design requirements demand alternative certifications or operating temperature ranges, or when procurement optimization requires sourcing from multiple manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Unit
Voltage - Zener (Nom)	39	V
Power - Max	1	W
Tolerance	±5.12%	-
Impedance (Max)	40	Ohms
Current - Reverse Leakage @ Vr	1	µA @ 30 V
Voltage - Forward (Vf) (Max) @ If	1.2	V @ 200 mA
Operating Temperature	-55°C ~ 175°C	TJ
Mounting Type	Surface Mount	-
Package / Case	DO-219AB	-
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitution of the BZD27C39P RUG is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Zener voltage: 39 V nominal
Maximum power dissipation: 1 W or greater
Package type: DO-219AB (Sub SMA)
Mounting configuration: Surface Mount
Impedance (Max): 40 Ohms
Reverse leakage current: 1 µA @ 30 V
Forward voltage: 1.2 V @ 200 mA
RoHS3 compliance
MSL rating: 1 (Unlimited)

Substitute parts are grouped into two categories based on these parameters:

Parametric Equivalent: Parts with identical electrical specifications and tolerance ratings from the same manufacturer series.

Similar Manufacturer Parts: Parts from alternative manufacturers (Vishay General Semiconductor - Diodes Division) that meet all critical electrical parameters and package requirements, with variations in power rating (800 mW vs. 1 W) and operating temperature range.

Parameter Comparison

Parameter	BZD27C39P RUG	BZD27C39P	BZD27C39P-E3-08	BZD27C39P-HE3-08
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Vishay General Semiconductor - Diodes Division	Vishay General Semiconductor - Diodes Division
Voltage - Zener (Nom)	39 V	39 V	39 V	39 V
Power - Max	1 W	1 W	800 mW	800 mW
Tolerance	±5.12%	±5%	-	-
Impedance (Max)	40 Ohms	40 Ohms	40 Ohms	40 Ohms
Current - Reverse Leakage @ Vr	1 µA @ 30 V	1 µA @ 30 V	1 µA @ 30 V	1 µA @ 30 V
Voltage - Forward (Vf) (Max) @ If	1.2 V @ 200 mA	1.2 V @ 200 mA	1.2 V @ 200 mA	1.2 V @ 200 mA
Operating Temperature	-55°C ~ 175°C	-55°C ~ 175°C	-65°C ~ 175°C	-65°C ~ 175°C
Package / Case	DO-219AB	DO-219AB	DO-219AB	DO-219AB
Product Status	Active	Not For New Designs	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Grade	-	-	-	Automotive
Qualification	-	-	-	AEC-Q101

Engineering Selection Recommendations

BZD27C39P (Taiwan Semiconductor Corporation): This part is a parametric equivalent with identical electrical specifications and tolerance to the BZD27C39P RUG. However, this part carries a "Not For New Designs" product status designation. Selection of this part is appropriate only for legacy system maintenance or replacement applications where the original specification must be preserved. For new design implementations, alternative active-status parts are preferred.

BZD27C39P-E3-08 (Vishay General Semiconductor - Diodes Division): This part maintains active product status and meets all critical electrical parameters. The maximum power rating is 800 mW compared to 1 W in the primary part. The operating temperature range extends to -65°C, providing enhanced low-temperature performance. This part is suitable for applications where the 800 mW power rating is sufficient and extended low-temperature operation is beneficial.

BZD27C39P-HE3-08 (Vishay General Semiconductor - Diodes Division): This part is qualified to AEC-Q101 automotive standards and carries automotive-grade designation. It maintains the same electrical specifications as BZD27C39P-E3-08 with 800 mW maximum power and -65°C to 175°C operating temperature range. Selection of this part is required for automotive applications or systems requiring automotive-grade component certification.

Frequently Asked Questions (FAQ)

Q: Can BZD27C39P-E3-08 or BZD27C39P-HE3-08 be used as direct replacements for BZD27C39P RUG in existing designs?

A: Both parts are electrically compatible with the BZD27C39P RUG across all critical parameters: 39 V zener voltage, 40 Ohms maximum impedance, 1 µA reverse leakage current, and 1.2 V forward voltage. Both use the DO-219AB package. However, the maximum power rating is 800 mW instead of 1 W. Substitution is valid only if the circuit design does not require the full 1 W power dissipation capability. Circuit analysis must confirm that power dissipation remains below 800 mW under all operating conditions.

Q: What is the difference between BZD27C39P-E3-08 and BZD27C39P-HE3-08?

A: Both parts share identical electrical specifications and package configuration. The primary difference is that BZD27C39P-HE3-08 carries automotive-grade qualification (AEC-Q101) and is designated for automotive applications. BZD27C39P-E3-08 is a standard industrial-grade component. Selection between these parts depends on application requirements: use BZD27C39P-HE3-08 for automotive systems, and BZD27C39P-E3-08 for general industrial applications.

Q: Why does BZD27C39P carry a "Not For New Designs" status?

A: The "Not For New Designs" designation indicates that the manufacturer has transitioned this part to end-of-life status and is no longer recommending it for new product development. Existing inventory remains available for legacy system support. New designs should utilize active-status alternatives such as BZD27C39P-E3-08 or BZD27C39P-HE3-08.

Q: Are all substitute parts RoHS3 compliant and MSL 1?

A: Yes. All parts listed in this reference—BZD27C39P, BZD27C39P-E3-08, and BZD27C39P-HE3-08—are ROHS3 compliant and carry MSL rating 1 (Unlimited). This ensures compatibility with modern manufacturing processes and storage requirements.

Q: What is the significance of the extended operating temperature range (-65°C vs. -55°C) in the Vishay parts?

A: The Vishay parts (BZD27C39P-E3-08 and BZD27C39P-HE3-08) specify a lower minimum operating temperature of -65°C compared to -55°C for the Taiwan Semiconductor parts. This extended range provides additional margin for applications operating in extreme cold environments. If the design operates only within the -55°C to 175°C range, both temperature specifications are functionally equivalent.

Q: Can tolerance differences (±5.12% vs. ±5%) affect circuit performance?

A: The tolerance difference between BZD27C39P RUG (±5.12%) and BZD27C39P (±5%) represents a 0.12% variation in the specified tolerance band. For most applications, this difference is negligible. Circuit designs must account for the full tolerance range of whichever part is selected. If the design margin is critical, tolerance specifications should be evaluated against the specific circuit requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message