BZD17C62P RUG Equivalent & Substitute Parts

Part Overview

The BZD17C62P RUG is a 62 V, 800 mW Zener diode manufactured by Taiwan Semiconductor Corporation in Surface Mount Sub SMA packaging (DO-219AB). This component is classified as an Active product and is ROHS3 compliant. The part operates across a temperature range of -55°C to 175°C and is designed for applications requiring voltage regulation and transient protection in surface mount configurations. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package type and functional requirements.

Substiute Parts

BZD17C62P RUG

Taiwan Semiconductor CorporationIn Stock: 1131BZD17C62P RUG Datasheet

Current PartRFQ

BZD27C62P-E3-08

Vishay General Semiconductor - Diodes DivisionIn Stock: 3091BZD27C62P-E3-08 Datasheet

SimilarRFQ

BZD27C62P-M3-08

Vishay General Semiconductor - Diodes DivisionIn Stock: 3129BZD27C62P-M3-08 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BZD17C62P RUG are qualified based on the following electrical and mechanical parameters:

Critical Matching Parameters:

• Voltage - Zener (Nominal): 62 V
• Power - Maximum: 800 mW
• Impedance (Maximum): 80 Ohms
• Current - Reverse Leakage @ Vr: 1 µA @ 47 V
• Voltage - Forward (Maximum) @ If: 1.2 V @ 200 mA
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts BZD27C62P-E3-08 and BZD27C62P-M3-08, both manufactured by Vishay General Semiconductor - Diodes Division, meet all critical electrical specifications and package requirements. Both substitutes maintain the same 62 V nominal Zener voltage, 800 mW maximum power dissipation, 80 Ohms maximum impedance, and DO-219AB package configuration. The primary differences are in manufacturer identity, operating temperature range extension, and packaging format (Tape & Reel versus Cut Tape & Digi-Reel).

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts BZD27C62P-E3-08 and BZD27C62P-M3-08 are functionally equivalent to the BZD17C62P RUG for applications requiring 62 V, 800 mW Zener diode functionality in DO-219AB surface mount packages.

Compliance and Certification Alignment: All three parts maintain ROHS3 compliance, REACH Unaffected status, and EAR99 ECCN classification. Moisture Sensitivity Level 1 (Unlimited) is consistent across all variants, indicating no special moisture handling requirements during storage or assembly.

Operating Temperature Consideration: The substitute parts from Vishay extend the minimum operating temperature to -65°C compared to the main part's -55°C minimum. This extended range does not create incompatibility; it represents an expanded operational envelope suitable for applications requiring lower temperature performance.

Packaging Format Differences: BZD27C62P-E3-08 is supplied in Tape & Reel (TR) format with 2981 pieces in stock. BZD27C62P-M3-08 is supplied in Cut Tape (CT) & Digi-Reel format with 3100 pieces in stock. Selection between these substitutes depends on assembly line requirements and tape format compatibility rather than electrical performance.

Frequently Asked Questions (FAQ)

Q: Can BZD27C62P-E3-08 or BZD27C62P-M3-08 be used as direct replacements for BZD17C62P RUG?

A: Yes. Both substitute parts maintain identical electrical specifications for Zener voltage (62 V), maximum power dissipation (800 mW), impedance (80 Ohms maximum), reverse leakage current (1 µA @ 47 V), and forward voltage (1.2 V @ 200 mA). Package type (DO-219AB) and mounting method (Surface Mount) are identical. All parts are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between BZD27C62P-E3-08 and BZD27C62P-M3-08?

A: The primary differences are packaging format and inventory availability. BZD27C62P-E3-08 is supplied in Tape & Reel (TR) format with 2981 pieces available. BZD27C62P-M3-08 is supplied in Cut Tape (CT) & Digi-Reel format with 3100 pieces available. Both parts have identical electrical characteristics and operating temperature ranges (-65°C to 175°C).

Q: Does the extended operating temperature range of the substitute parts affect compatibility?

A: No. The substitute parts operate from -65°C to 175°C, while the main part operates from -55°C to 175°C. The extended lower temperature limit of the substitutes does not create incompatibility. Applications designed for the -55°C to 175°C range operate within the substitute parts' qualified range.

Q: Are there any tolerance differences between the main part and substitute parts?

A: The main part BZD17C62P RUG specifies a Zener voltage tolerance of ±6.45%. The substitute parts do not list a specific tolerance value in the provided specifications. Both substitutes maintain the same 62 V nominal Zener voltage and identical electrical performance parameters.

Q: What packaging considerations apply when selecting between these parts?

A: BZD27C62P-E3-08 (Tape & Reel) is suitable for high-volume automated assembly lines using standard tape-fed pick-and-place equipment. BZD27C62P-M3-08 (Cut Tape & Digi-Reel) offers flexibility for mixed-volume production or manual assembly processes. Both formats are compatible with standard surface mount assembly procedures for DO-219AB packages.

Q: Are all three parts RoHS and REACH compliant?

A: Yes. BZD17C62P RUG, BZD27C62P-E3-08, and BZD27C62P-M3-08 are all ROHS3 compliant and REACH Unaffected. All parts carry EAR99 ECCN classification and HTSUS code 8541.10.0050.