BZD17C24P RVG Equivalent & Substitute Parts

Part Overview

The BZD17C24P RVG is a 24 V, 800 mW Zener diode manufactured by Taiwan Semiconductor Corporation in Sub SMA surface mount packaging. This component is classified as an active product and is RoHS3 compliant. Zener diodes of this specification are used in voltage regulation and protection circuits where precise voltage reference and power dissipation characteristics are required. Substitute parts may be necessary due to inventory availability, supply chain considerations, or specific packaging requirements while maintaining equivalent electrical performance.

Substiute Parts

BZD17C24P RVG

Taiwan Semiconductor CorporationIn Stock: 705BZD17C24P RVG Datasheet

Current PartRFQ

BZD27C24P-E3-08

Vishay General Semiconductor - Diodes DivisionIn Stock: 3305BZD27C24P-E3-08 Datasheet

SimilarRFQ

BZD27C24P-M3-08

Vishay General Semiconductor - Diodes DivisionIn Stock: 30312BZD27C24P-M3-08 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BZD17C24P RVG are qualified based on the following electrical and mechanical parameters:

Critical Matching Parameters:

• Voltage - Zener (Nominal): 24 V
• Power - Maximum: 800 mW
• Impedance (Maximum): 15 Ohms
• Current - Reverse Leakage @ Vr: 1 µA @ 18 V
• Voltage - Forward (Maximum) @ If: 1.2 V @ 200 mA
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts BZD27C24P-E3-08 and BZD27C24P-M3-08, both manufactured by Vishay General Semiconductor - Diodes Division, meet all critical electrical specifications and compliance requirements. Both substitute parts are packaged in DO-219AB (SMF) surface mount configuration and maintain identical zener voltage, power dissipation, impedance, and leakage characteristics. The primary differences are in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and operating temperature range extension on the lower end (-65°C versus -55°C).

Parameter Comparison

Engineering Selection Recommendations

BZD27C24P-E3-08 Selection Criteria: This substitute is appropriate for applications requiring Cut Tape or Digi-Reel® packaging formats. The part maintains full electrical equivalence to the BZD17C24P RVG with identical zener voltage, power rating, and impedance specifications. Extended lower operating temperature range (-65°C) provides additional thermal margin for applications operating below -55°C. RoHS3 compliance and REACH unaffected status ensure regulatory alignment with the original part.

BZD27C24P-M3-08 Selection Criteria: This substitute is appropriate for applications requiring Tape & Reel packaging, matching the original BZD17C24P RVG format. Electrical specifications are fully equivalent. Extended lower operating temperature range (-65°C) provides additional thermal margin. RoHS3 compliance and REACH unaffected status ensure regulatory alignment. Higher inventory availability (30,294 pcs) may support production volume requirements.

Both substitute parts are active products from an established manufacturer and are suitable for direct replacement in circuits designed for the BZD17C24P RVG, provided packaging format requirements are satisfied.

Frequently Asked Questions (FAQ)

Q: Can BZD27C24P-E3-08 or BZD27C24P-M3-08 be used as direct replacements for BZD17C24P RVG?

A: Yes. Both substitute parts meet all critical electrical parameters: 24 V zener voltage, 800 mW power dissipation, 15 Ohms maximum impedance, and identical forward voltage characteristics. All three parts use DO-219AB surface mount packaging and are RoHS3 compliant with MSL 1 rating.

Q: What is the difference between BZD27C24P-E3-08 and BZD27C24P-M3-08?

A: The primary difference is packaging format. BZD27C24P-E3-08 is supplied in Cut Tape & Digi-Reel® format, while BZD27C24P-M3-08 is supplied in Tape & Reel format. Both have identical electrical specifications and operating temperature ranges (-65°C to 175°C). BZD27C24P-M3-08 has significantly higher inventory availability.

Q: Does the extended operating temperature range of the substitute parts affect compatibility?

A: No. The substitute parts specify -65°C to 175°C operating range compared to -55°C to 175°C for the BZD17C24P RVG. The extended lower temperature specification is a superset of the original part's range and does not affect compatibility. Applications operating within the original -55°C to 175°C range will function identically.

Q: Are there tolerance differences between the main part and substitutes?

A: The BZD17C24P RVG specifies ±5.83% tolerance on zener voltage. The substitute parts do not list a specific tolerance value in the provided specifications. For applications requiring specific tolerance matching, this parameter should be verified against detailed datasheets.

Q: What packaging considerations apply when selecting between these parts?

A: The BZD17C24P RVG and BZD27C24P-M3-08 both use Tape & Reel packaging, suitable for automated assembly processes. The BZD27C24P-E3-08 uses Cut Tape & Digi-Reel® format, which may be preferred for lower-volume applications or manual assembly. All three parts are surface mount DO-219AB packages with identical footprints.

Q: Are all three parts RoHS3 compliant?

A: Yes. The BZD17C24P RVG, BZD27C24P-E3-08, and BZD27C24P-M3-08 are all RoHS3 compliant with REACH unaffected status, ensuring regulatory compliance across all three options.