BYM07-200/32 Equivalent & Substitute Parts

Part Overview

The BYM07-200/32 is a general-purpose fast recovery rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount diode operates at 200 V DC reverse voltage with 500 mA average rectified current and features a 50 ns reverse recovery time, classifying it within the SUPERECTIFIER® series. The component is actively produced and ROHS3 compliant, making it suitable for modern electronic applications requiring fast switching characteristics in compact form factors.

Equivalent and substitute parts are identified to address supply chain continuity, inventory availability, and packaging format requirements while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Substiute Parts

BYM07-200/32

Vishay General Semiconductor - Diodes DivisionIn Stock: 752BYM07-200/32 Datasheet

Current PartRFQ

BYM07-200-E3/98

Vishay General Semiconductor - Diodes DivisionIn Stock: 5973BYM07-200-E3/98 Datasheet

Parametric EquivalentRFQ

EGL34D-E3/98

Vishay General Semiconductor - Diodes DivisionIn Stock: 11643EGL34D-E3/98 Datasheet

Parametric EquivalentRFQ

US1D-13-F

Diodes IncorporatedIn Stock: 155307US1D-13-F Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BYM07-200/32 are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalents maintain identical electrical specifications and package form factor. These parts satisfy direct replacement requirements without circuit modification:

• Voltage - DC Reverse (Vr) (Max): 200 V
• Current - Average Rectified (Io): 500 mA
• Voltage - Forward (Vf) (Max) @ If: 1.25 V @ 500 mA
• Reverse Recovery Time (trr): 50 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 200 V
• Package / Case: DO-213AA (Glass)

Manufacturer Recommended Substitute provides electrical compatibility with modified package geometry. This part meets the core voltage and speed requirements but operates at higher current capacity and uses an alternative surface mount package:

• Voltage - DC Reverse (Vr) (Max): 200 V
• Reverse Recovery Time (trr): 50 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 200 V
• Package / Case: DO-214AC, SMA (alternative to DO-213AA)

Parameter Comparison

Engineering Selection Recommendations

BYM07-200-E3/98 and EGL34D-E3/98 are direct parametric equivalents to the BYM07-200/32. Both parts maintain identical electrical specifications and package geometry (DO-213AA). Selection between these three parts is determined by packaging format availability and inventory requirements. BYM07-200-E3/98 and EGL34D-E3/98 are supplied in Tape & Reel format, suitable for automated assembly processes, while BYM07-200/32 is available in bulk packaging. All three parts are ROHS3 compliant, REACH unaffected, and operate across the same temperature range (-65°C to 175°C).

US1D-13-F is a manufacturer-recommended substitute from Diodes Incorporated. This part maintains the 200 V reverse voltage rating and 50 ns reverse recovery time but operates at 1 A average rectified current, exceeding the 500 mA specification of the primary part. The US1D-13-F uses the DO-214AC (SMA) package instead of DO-213AA, requiring PCB layout modification. The maximum operating temperature is 150°C, which is 25°C lower than the BYM07-200/32. This substitute is appropriate for applications where higher current capacity is beneficial and package footprint change is acceptable. US1D-13-F is ROHS3 compliant and REACH unaffected.

All substitute parts maintain compliance with regulatory requirements (ROHS3, REACH unaffected) and possess unlimited moisture sensitivity level (MSL 1), ensuring compatibility with standard storage and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can BYM07-200-E3/98 replace BYM07-200/32 in existing designs?

A: Yes. BYM07-200-E3/98 is a parametric equivalent with identical electrical specifications and package geometry. The only difference is packaging format (Tape & Reel versus bulk). No circuit modification is required.

Q: What is the difference between BYM07-200-E3/98 and EGL34D-E3/98?

A: Both parts are parametric equivalents with identical electrical specifications and DO-213AA package geometry. The difference is the base product number designation (BYM07 versus EGL34). Both are manufactured by Vishay and are interchangeable.

Q: Can US1D-13-F be used as a direct replacement for BYM07-200/32?

A: US1D-13-F is a manufacturer-recommended substitute but not a direct replacement. It operates at 1 A instead of 500 mA and uses the DO-214AC (SMA) package instead of DO-213AA. PCB layout modification is required. The maximum operating temperature is 150°C instead of 175°C.

Q: What are the key parameters that determine substitution compatibility?

A: The critical parameters are Voltage - DC Reverse (Vr) (Max), Current - Average Rectified (Io), Reverse Recovery Time (trr), and Package / Case. Parametric equivalents maintain all four parameters. Manufacturer-recommended substitutes maintain voltage, recovery time, and leakage current but may differ in current capacity and package form factor.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. BYM07-200-E3/98, EGL34D-E3/98, and US1D-13-F are all ROHS3 compliant and REACH unaffected, matching the compliance status of the BYM07-200/32.

Q: What is the difference in capacitance between BYM07-200/32 and US1D-13-F?

A: BYM07-200/32 has 7 pF capacitance at 4V, 1MHz. US1D-13-F has 20 pF at the same conditions. This higher capacitance may affect high-frequency circuit performance and should be evaluated in applications sensitive to junction capacitance.

Q: Can I use BYM07-200-E3/98 in automated assembly if my current design uses BYM07-200/32?

A: Yes. BYM07-200-E3/98 is supplied in Tape & Reel format, which is standard for automated pick-and-place assembly. The identical package geometry (DO-213AA) ensures compatibility with existing PCB designs and assembly equipment.