BXRC-40E2000-C-23 Equivalent & Substitute Parts

Part Overview

The BXRC-40E2000-C-23 is a Bridgelux Vero® 13 Array Chip On Board (COB) LED module designed for white, neutral light output at 4000K color temperature. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing production and procurement requirements. The module features a round configuration with integrated connector, delivering 2262 lumens at typical operating conditions with 140 lumens per watt efficiency.

Substiute Parts

BXRC-40E2000-C-23

BridgeluxIn Stock: 1190BXRC-40E2000-C-23 Datasheet

Current PartRFQ

BXRC-40E2000-D-73

BridgeluxIn Stock: 1162BXRC-40E2000-D-73 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BXRC-40E2000-C-23 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Color: White, Neutral
• CCT (Color Temperature): 4000K 3-Step MacAdam Ellipse
• Configuration: Round
• Physical Dimensions: 36.20mm Dia, 1.90mm Height, 13.20mm Dia LES
• Lens Type: Flat
• Features: With Connector
• CRI: 80
• Base Product Number: BXRC-40

Allowable Variation Parameters:

• Luminous Flux: Within typical operating range
• Lumens/Watt efficiency: Within typical operating range
• Forward Voltage (Vf): Within acceptable tolerance
• Current ratings: Within specified maximum limits
• Test temperature conditions: May vary
• Product Status: Active status preferred for ongoing availability
• Packaging format: May differ (Tray vs. other formats)
• Compliance certifications: May be updated versions (RoHS3 vs. RoHS)

The BXRC-40E2000-D-73 qualifies as a direct substitute based on identical color, CCT, configuration, physical dimensions, lens type, connector feature, and CRI specifications.

Parameter Comparison

Engineering Selection Recommendations

The BXRC-40E2000-D-73 is the direct substitute for the obsolete BXRC-40E2000-C-23. Selection is based on the following engineering criteria:

Product Status: The BXRC-40E2000-D-73 carries Active product status, ensuring continued availability and supply chain reliability compared to the Obsolete status of the main part.

Compliance Certifications: Both parts maintain REACH Unaffected and EAR99 ECCN classifications. The substitute part carries ROHS3 Compliant certification, representing an updated compliance standard compared to the RoHS Compliant designation of the original part. Both certifications satisfy current regulatory requirements.

Regulatory Alignment: Moisture Sensitivity Level remains at 1 (Unlimited) for both parts, indicating identical handling and storage requirements.

Electrical Performance: The substitute part demonstrates improved efficiency at 149 lm/W compared to 140 lm/W, with slightly reduced forward voltage (30.9V vs. 32.3V) and maximum current rating (1.0A vs. 1.05A). These variations fall within acceptable operational parameters for COB LED modules.

Physical and Optical Compatibility: Identical dimensions, lens type, connector feature, color temperature, CRI, and configuration ensure direct mechanical and optical compatibility in existing designs.

Frequently Asked Questions (FAQ)

Q: Can the BXRC-40E2000-D-73 be used as a direct replacement for BXRC-40E2000-C-23 in existing designs?

A: Yes. Both parts share identical physical dimensions (36.20mm Dia, 1.90mm Height), optical properties (4000K CCT, 80 CRI, Flat lens), and connector configuration. No design modifications are required for mechanical or optical integration.

Q: What are the key differences between these two parts?

A: The primary differences are product status (Active vs. Obsolete), compliance certification level (ROHS3 vs. RoHS), and minor electrical performance variations. The substitute part operates at higher efficiency (149 vs. 140 lm/W) with slightly lower forward voltage and maximum current rating.

Q: Are there any packaging differences?

A: The main part uses standard packaging format, while the substitute part is supplied in Tray packaging. This difference does not affect component functionality or performance.

Q: Do both parts have identical color temperature specifications?

A: Yes. Both parts are specified at 4000K with 3-Step MacAdam Ellipse tolerance and 80 CRI, ensuring identical color output characteristics.

Q: What is the significance of the Gen 7 designation in the substitute part series?

A: The Gen 7 Vero® 13 Array designation indicates a newer generation of the Vero® 13 Array platform. This reflects product evolution while maintaining backward compatibility with the original Vero® 13 Array specifications for this particular model.

Q: Are the electrical ratings compatible with existing driver circuits?

A: The substitute part operates within compatible electrical ranges. Forward voltage is 30.9V (vs. 32.3V), and maximum current is 1.0A (vs. 1.05A). Existing driver circuits designed for the original part will operate the substitute part within specification. Verification of driver output voltage and current limits is recommended for specific applications.

Q: What is the test temperature difference, and does it affect performance?

A: The main part is tested at 25°C, while the substitute is tested at 85°C. The substitute part demonstrates higher efficiency (149 lm/W) even at the elevated test temperature, indicating improved thermal performance characteristics.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both parts maintain REACH Unaffected status and EAR99 ECCN classification. The substitute part carries updated ROHS3 Compliant certification, which supersedes the RoHS Compliant designation and reflects current regulatory requirements.