BXRC-30A2001-C-23 Equivalent & Substitute Parts

Part Overview

The BXRC-30A2001-C-23 is a Bridgelux Décor Series™ Class A Vero® 13 Chip On Board (COB) LED lighting module designed for decorative white warm (3000K) applications. This component delivers 1500 lumens at 500mA test current with a Color Rendering Index (CRI) of 93, suitable for architectural and accent lighting systems requiring high color fidelity.

The BXRC-30A2001-C-23 carries an Obsolete product status. Identifying equivalent substitute parts ensures design continuity, supply chain reliability, and access to functionally compatible alternatives that meet current manufacturing and compliance standards.

Substiute Parts

BXRC-30A2001-C-23

BridgeluxIn Stock: 902BXRC-30A2001-C-23 Datasheet

Current PartRFQ

BXRC-30A2001-D-73

BridgeluxIn Stock: 786BXRC-30A2001-D-73 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BXRC-30A2001-C-23 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Type: Chip On Board (COB) — ensures identical form factor and mounting interface
• Color / CCT: White, Warm / 3000K — maintains color temperature specification for application consistency
• Configuration: Round — preserves physical geometry and optical design
• Size / Dimension: 36.20mm Dia — ensures mechanical fit within existing assemblies
• Height: 1.90mm — maintains clearance compatibility
• Light Emitting Surface (LES): 13.20mm Dia — preserves optical aperture characteristics
• Lens Type: Flat — maintains optical interface specification
• Viewing Angle: 120° — ensures beam distribution pattern compatibility
• Features: With Connector — confirms electrical interface type
• CRI (Color Rendering Index): 93 — maintains color accuracy specification

Allowable Variation Parameters:

• Luminous Flux: Variations permitted within application tolerance
• Voltage - Forward (Vf): Minor variations acceptable if within driver specification range
• Current - Max: Variations acceptable if within power supply capability
• Product Status: Active status preferred for obsolete parts
• Packaging: Variations permitted (e.g., Tray vs. standard packaging)
• Compliance Standards: Updates to current regulatory versions acceptable (e.g., RoHS3 vs. RoHS Compliant)

The BXRC-30A2001-D-73 qualifies as a direct substitute based on full alignment of all mandatory parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: BXRC-30A2001-D-73

The BXRC-30A2001-D-73 is the direct equivalent for the obsolete BXRC-30A2001-C-23. Selection is based on the following engineering criteria:

Mechanical Compatibility: All physical parameters are identical: 36.20mm diameter, 1.90mm height, 13.20mm LES diameter, round configuration, and flat lens type. The substitute integrates into existing mechanical assemblies without modification.

Optical Compatibility: Both parts maintain 120° viewing angle, 3000K color temperature, and 93 CRI specification. Optical performance characteristics are preserved for application requirements.

Electrical Compatibility: Forward voltage differs by 1.4V (32.3V vs. 30.9V), which falls within standard driver tolerance ranges. Maximum current specification of 1.0A (substitute) versus 1.05A (main part) is compatible with typical power supply designs. The connector interface is identical.

Regulatory Compliance: The substitute carries ROHS3 Compliant status, representing an updated compliance standard relative to the main part's RoHS Compliant designation. Both parts maintain REACH Unaffected status and identical Moisture Sensitivity Level (MSL 1 - Unlimited).

Product Status: The substitute holds Active product status, ensuring current manufacturing availability and supply chain continuity. This addresses the primary limitation of the obsolete main part.

Performance Enhancement: The substitute delivers improved luminous efficiency (111 lm/W vs. 93 lm/W) and higher luminous flux output (1716lm vs. 1500lm) when tested at elevated temperature (85°C vs. 25°C), providing performance margin for thermal management scenarios.

Frequently Asked Questions (FAQ)

Q: Can the BXRC-30A2001-D-73 be used as a direct replacement for the BXRC-30A2001-C-23 in existing designs?

A: Yes. The substitute maintains identical mechanical dimensions (36.20mm diameter, 1.90mm height), optical specifications (120° viewing angle, 3000K CCT, 93 CRI), and electrical interface (connector type). No design modification is required for mechanical or optical integration. Electrical driver compatibility must be confirmed within the specified forward voltage range (30.9V substitute vs. 32.3V main part).

Q: What is the significance of the forward voltage difference between the two parts?

A: The main part specifies 32.3V typical forward voltage, while the substitute specifies 30.9V. This 1.4V difference is within the tolerance range of standard LED drivers and power supplies used in decorative lighting applications. Driver specifications should be reviewed to confirm operation within the substitute's voltage range. This variation does not affect compatibility in properly designed systems.

Q: Why does the substitute show higher luminous flux output?

A: The substitute (BXRC-30A2001-D-73) is tested at 85°C, while the main part (BXRC-30A2001-C-23) is tested at 25°C. The higher output (1716lm vs. 1500lm) reflects improved performance characteristics of the newer design. This represents a performance enhancement rather than a compatibility concern.

Q: Are there packaging differences between the main part and substitute?

A: The main part packaging is not specified in the provided data. The substitute is supplied in Tray packaging, which is a standard format for COB LED modules. Tray packaging is compatible with automated assembly processes and standard handling procedures.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current version of the RoHS directive with updated substance restrictions. The substitute's ROHS3 Compliant status meets or exceeds the requirements of the main part's RoHS Compliant designation. Both parts are suitable for applications requiring hazardous substance compliance.

Q: Is the substitute suitable for high-temperature applications?

A: The substitute is characterized at 85°C test temperature, indicating thermal stability at elevated operating conditions. The main part is characterized at 25°C. For applications requiring sustained operation above 25°C, the substitute's thermal characterization provides additional confidence in performance consistency. Specific thermal management requirements should be evaluated based on application duty cycle and ambient conditions.

Q: What does MSL 1 (Unlimited) mean for handling and storage?

A: Moisture Sensitivity Level 1 (Unlimited) indicates the lowest moisture sensitivity classification. Both the main part and substitute can be stored and handled under standard conditions without special moisture control measures. No baking or desiccant storage is required prior to assembly.

Q: Are there any compatibility concerns with existing connectors?

A: Both parts feature identical connector specifications ("With Connector" designation). Existing connector interfaces and mating components are compatible with the substitute without modification.