BXRC-27G2000-C-22 Equivalent & Substitute Parts

Part Overview

The BXRC-27G2000-C-22 is a Chip On Board (COB) LED lighting module from Bridgelux's Vero® 13 Array series, designed for warm white lighting applications at 2700K color temperature. This component delivers 1696 lumens at typical operating conditions with a Color Rendering Index (CRI) of 90, suitable for general illumination and accent lighting systems.

The BXRC-27G2000-C-22 carries an Obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production requirements for applications currently utilizing this component.

Substiute Parts

BXRC-27G2000-C-22

BridgeluxIn Stock: 1158BXRC-27G2000-C-22 Datasheet

Current PartRFQ

BXRC-27G2000-D-73

BridgeluxIn Stock: 1007BXRC-27G2000-D-73 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BXRC-27G2000-C-22 is determined by the following critical parameters:

Mechanical Compatibility:

• Configuration: Round
• Size / Dimension: 36.20 mm Dia
• Height: 1.90 mm
• Light Emitting Surface (LES): 13.20 mm Dia
• Lens Type: Flat
• Features: With Connector

Optical & Thermal Compatibility:

• Color: White, Warm
• CCT: 2700K
• CRI: 90

Electrical Operating Range:

• Voltage - Forward (Vf): Nominal 32.3V with acceptable tolerance
• Current - Max: 1.05A
• Current - Test: 500mA

Compliance & Environmental:

• RoHS Status: RoHS Compliant or equivalent
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute part BXRC-27G2000-D-73 maintains identical mechanical dimensions, configuration, color temperature, and CRI rating. Electrical and performance characteristics remain within acceptable operating parameters for direct substitution in existing designs.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: BXRC-27G2000-D-73

The BXRC-27G2000-D-73 is the direct equivalent substitute for the obsolete BXRC-27G2000-C-22. Selection of this substitute is based on the following engineering factors:

Mechanical Compatibility: All physical dimensions, connector interface, and mounting characteristics are identical. Direct mechanical substitution is possible without PCB redesign or mechanical assembly modifications.

Optical Performance: Both components deliver 2700K warm white light with CRI 90. The substitute provides 1774 lumens versus 1696 lumens at 500mA test current, representing a 4.6% increase in luminous flux output. This performance improvement is within acceptable design margins for warm white lighting applications.

Electrical Characteristics: The substitute operates at 30.9V forward voltage compared to 32.3V, a 1.4V reduction. Maximum current rating is 1.0A versus 1.05A. These parameters remain compatible with standard LED driver circuits designed for the original component.

Efficiency Gain: The substitute delivers 115 lm/W versus 105 lm/W, representing a 9.5% efficiency improvement. This results in lower thermal load and reduced power consumption in equivalent lighting systems.

Compliance Status: The substitute carries ROHS3 Compliant certification, exceeding the RoHS Compliant status of the original part. Both components maintain MSL 1 (Unlimited) moisture sensitivity rating and REACH Unaffected status.

Product Availability: The substitute is Active status with 916 units in stock, ensuring supply chain continuity for ongoing production and replacement applications.

Frequently Asked Questions (FAQ)

Q: Can BXRC-27G2000-D-73 be used as a direct replacement for BXRC-27G2000-C-22 without circuit modifications?

A: Yes. The substitute maintains identical mechanical dimensions, connector interface, color temperature (2700K), and CRI (90). Electrical parameters are compatible with standard LED driver designs. No PCB redesign is required.

Q: What is the difference in luminous flux output between these two parts?

A: The BXRC-27G2000-D-73 produces 1774 lumens at 500mA test current, compared to 1696 lumens for the BXRC-27G2000-C-22. This represents a 4.6% increase in light output.

Q: Are there differences in forward voltage that affect driver selection?

A: The substitute operates at 30.9V typical forward voltage versus 32.3V for the original part. This 1.4V difference is within the tolerance range of standard LED drivers and does not require circuit recalibration.

Q: What is the significance of the MacAdam Ellipse difference (2-Step vs. 3-Step)?

A: The 3-Step MacAdam Ellipse specification for the substitute indicates tighter color temperature tolerance. Both parts deliver 2700K warm white light with CRI 90, maintaining color consistency in lighting applications.

Q: Does the substitute have better compliance certifications?

A: The BXRC-27G2000-D-73 carries ROHS3 Compliant certification, which represents an updated compliance standard compared to the RoHS Compliant status of the original part. Both maintain REACH Unaffected status.

Q: What is the packaging difference between these parts?

A: The original BXRC-27G2000-C-22 uses standard packaging, while the substitute BXRC-27G2000-D-73 is supplied in Tray packaging. Both are suitable for automated assembly processes.

Q: Is the substitute available in sufficient quantity for production?

A: The BXRC-27G2000-D-73 is Active status with 916 units in current inventory, providing adequate supply for ongoing production requirements.

Q: Can both parts be used interchangeably in existing designs?

A: Yes. Identical mechanical dimensions, connector configuration, and optical characteristics enable direct interchangeability. The substitute offers improved efficiency and updated compliance certifications.