BU7486SFV-E2 Equivalent & Substitute Parts Reference

Part Overview

The BU7486SFV-E2 from Rohm Semiconductor is a CMOS dual rail-to-rail amplifier in the Linear, Amplifiers category. It features 2 circuits, rail-to-rail output, 10V/µs slew rate, and is packaged in an 8-SSOP-B (LSSOP 0.173", 4.40mm width) form factor. The product is active and RoHS3 compliant. Finding alternative models is necessary to address supply chain disruptions, part status changes, specific compliance requirements, or unique design constraints.

Key Parameters

Parameter	BU7486SFV-E2
Manufacturer	Rohm Semiconductor
Category	Linear, Amplifiers
Amplifier Type	CMOS
Number of Circuits	2
Output Type	Rail-to-Rail
Slew Rate	10V/µs
Gain Bandwidth Product	10 MHz
Current - Input Bias	1 pA
Voltage - Input Offset	1 mV
Current - Supply	6mA
Current - Output / Channel	12 mA
Voltage - Supply Span (Min)	3 V
Voltage - Supply Span (Max)	5.5 V
Operating Temperature	-40°C ~ 105°C
Mounting Type	Surface Mount
Package / Case	8-LSSOP (0.173", 4.40mm Width)
Supplier Device Package	8-SSOP-B
RoHS Status	ROHS3 Compliant
MSL	1 (Unlimited)
REACH Status	REACH Unaffected
ECCN	EAR99

Substitute Part Grouping Explanation

Substitution is based strictly on the following key parameters:

Amplifier type and function (dual, rail-to-rail output)
Gain bandwidth product
Slew rate
Input bias and offset characteristics
Supply current and output current per channel
Supply voltage range
Package compatibility (8-TSSOP or 8-LSSOP with 0.173", 4.40mm width)
Operating temperature range
Compliance parameters (RoHS3, REACH, MSL)
Part status (active/available)

Each listed substitute matches the main IC’s critical form factor and key specifications within the limits set by provided parameters.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Amplifier Type	Number of Circuits	Output Type	Slew Rate	Gain Bandwidth Product	Current - Input Bias	Voltage - Input Offset	Current - Supply	Current - Output / Channel	Voltage - Supply Span (Min)	Voltage - Supply Span (Max)	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package	RoHS Status	MSL	REACH Status	ECCN
BU7486SFV-E2	Rohm Semiconductor	CMOS	2	Rail-to-Rail	10V/µs	10 MHz	1 pA	1 mV	6mA	12 mA	3 V	5.5 V	-40°C ~ 105°C	Surface Mount	8-LSSOP (0.173", 4.40mm Width)	8-SSOP-B	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
AZV358GTR-G1	Diodes Inc.	General Purpose	2	Rail-to-Rail	1V/µs	1 MHz	15 nA	1.7 mV	210µA (x2)	60 mA	2.7 V	5.5 V	-40°C ~ 85°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	3 (168 Hrs)	REACH Unaffected	EAR99
LMV358IPW	Texas Instruments	General Purpose	2	Rail-to-Rail	1V/µs	1 MHz	15 nA	1.7 mV	210µA (x2)	40 mA	2.7 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
LMV358IPWR	Texas Instruments	General Purpose	2	Rail-to-Rail	1V/µs	1 MHz	15 nA	1.7 mV	210µA (x2)	40 mA	2.7 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	2 (1 Year)	REACH Unaffected	EAR99
LMV358LIPT	STMicroelectronics	General Purpose	2	Rail-to-Rail	0.7V/µs	1.3 MHz	27 nA	1 mV	130µA (x2)	70 mA	2.7 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
LMV358QPWR	National Semiconductor	General Purpose	2	Rail-to-Rail	1V/µs	1 MHz	15 nA	1.7 mV	210µA (x2)	40 mA	2.7 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	N/A	N/A	EAR99
MCP6022-E/ST	Microchip Technology	General Purpose	2	Rail-to-Rail	7V/µs	10 MHz	1 pA	250 µV	1mA (x2)	30 mA	2.5 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
MCP6022-I/ST	Microchip Technology	General Purpose	2	Rail-to-Rail	7V/µs	10 MHz	1 pA	500 µV	1mA (x2)	30 mA	2.5 V	5.5 V	-40°C ~ 85°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
MCP6022T-E/ST	Microchip Technology	General Purpose	2	Rail-to-Rail	7V/µs	10 MHz	1 pA	250 µV	1mA (x2)	30 mA	2.5 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
MCP6022T-I/ST	Microchip Technology	General Purpose	2	Rail-to-Rail	7V/µs	10 MHz	1 pA	500 µV	1mA (x2)	30 mA	2.5 V	5.5 V	-40°C ~ 85°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
NCS20032DTBR2G	onsemi	General Purpose	2	Rail-to-Rail	8V/µs	7 MHz	1 pA	500 µV	275µA (x2)	96 mA	1.7 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99
NCV20032DTBR2G	onsemi	General Purpose	2	Rail-to-Rail	8V/µs	7 MHz	1 pA	500 µV	275µA (x2)	14 mA	1.7 V	5.5 V	-40°C ~ 125°C	Surface Mount	8-TSSOP	8-TSSOP	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	EAR99

Engineering Selection Recommendations

All substitute parts listed are specified as RoHS3 compliant and REACH unaffected according to the provided data. Moisture Sensitivity Level (MSL) values are included for each part; confirm that the MSL of the substitute is suitable for the application’s storage and handling conditions. Substitute selections should prioritize parts with active or last time buy status based on production and lifecycle considerations.

Frequently Asked Questions (FAQ)

Q1: How are substitute amplifiers for BU7486SFV-E2 identified?
A1: Substitute amplifiers are selected strictly based on matching or closely aligning key electrical parameters, package, supply voltage, temperature rating, compliance, and availability status as provided.

Q2: Are all substitutes compatible with the same PCB footprint?
A2: All substitutes are supplied in 8-TSSOP or 8-LSSOP packages with the same width (0.173", 4.40mm), supporting footprint compatibility according to provided specifications.

Q3: What compliance requirements must substitutes meet?
A3: All listed substitutes are RoHS3 compliant, have REACH unaffected status, and provide specified MSL and ECCN data.

Q4: Are there performance parameter differences among these substitutes?
A4: Differences exist in slew rate, gain bandwidth product, input bias, and other electrical characteristics. All listed values are contained in the comparison table for engineer evaluation.

Q5: What should be considered regarding product status?
A5: Parts specified as active are preferable for long-term support. "Last Time Buy" status means supply may be limited. Refer to the part status in the comparison table.

Q6: Is functional equivalence the same as form factor equivalence?
A6: No. Functional equivalence is based on allowed electrical parameters, while form factor equivalence is based on package type and size. Both are matched for the substitutes listed above as per the provided parameters.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message