BU7486FV-E2 Equivalent & Substitute Parts Reference

Part Overview

The BU7486FV-E2 by Rohm Semiconductor is a CMOS dual operational amplifier categorized under linear amplifiers. This product features two circuits per package, with a rail-to-rail output, operating in a surface-mount 8-SSOP-B package. The amplifier is active and compliant with RoHS3 and REACH, with a broad inventory available. Situations such as supply constraints, procurement interruptions, or multi-source requirements make it essential to identify compatible substitute models with matching or similar electrical and mechanical parameters.

Key Parameters

Parameter	BU7486FV-E2
Amplifier Type	CMOS
Number of Circuits	2
Output Type	Rail-to-Rail
Slew Rate	10V/µs
Gain Bandwidth Product	10 MHz
Current - Input Bias	1 pA
Voltage - Input Offset	1 mV
Current - Supply	6mA
Current - Output / Channel	12 mA
Voltage - Supply Span (Min)	3 V
Voltage - Supply Span (Max)	5.5 V
Operating Temperature	-40°C ~ 105°C
Mounting Type	Surface Mount
Package / Case	8-LSSOP (0.173", 4.40mm Width)
Supplier Device Package	8-SSOP-B
RoHS Status	ROHS3 Compliant
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute or equivalent parts are determined strictly on the basis of identical or comparable core parameters. The criteria applied include: amplifier type, number of circuits, output type, slew rate, gain bandwidth product, current and voltage characteristics, operating temperature, compliance status, mounting type, and package dimensions. Only components matching these definitions within the linear, amplifier device category are listed.

Parameter Comparison

Parameter	BU7486FV-E2	AZV358GTR-G1	LMV358IPW	LMV358IPWR	LMV358LIPT	MCP6022-E/ST	MCP6022-I/ST	MCP6022T-E/ST	MCP6022T-I/ST	NCS20032DTBR2G	NCV20032DTBR2G
Amplifier Type	CMOS	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	2	2	2	2	2	2	2	2	2	2	2
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate	10V/µs	1V/µs	1V/µs	1V/µs	0.7V/µs	7V/µs	7V/µs	7V/µs	7V/µs	8V/µs	8V/µs
Gain Bandwidth Product	10 MHz	1 MHz	1 MHz	1 MHz	1.3 MHz	10 MHz	10 MHz	10 MHz	10 MHz	7 MHz	7 MHz
Current - Input Bias	1 pA	15 nA	15 nA	15 nA	27 nA	1 pA	1 pA	1 pA	1 pA	1 pA	1 pA
Voltage - Input Offset	1 mV	1.7 mV	1.7 mV	1.7 mV	1 mV	250 µV	500 µV	250 µV	500 µV	500 µV	500 µV
Current - Supply	6mA	210µA (x2)	210µA (x2)	210µA (x2)	130µA (x2)	1mA (x2)	1mA (x2)	1mA (x2)	1mA (x2)	275µA (x2)	275µA (x2)
Current - Output / Channel	12 mA	60 mA	40 mA	40 mA	70 mA	30 mA	30 mA	30 mA	30 mA	96 mA	14 mA
Voltage - Supply Span (Min)	3 V	2.7 V	2.7 V	2.7 V	2.7 V	2.5 V	2.5 V	2.5 V	2.5 V	1.7 V	1.7 V
Voltage - Supply Span (Max)	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V
Operating Temperature	-40°C ~ 105°C	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 125°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	8-LSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)	8-TSSOP (0.173", 4.40mm)
Supplier Device Package	8-SSOP-B	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP	8-TSSOP
RoHS Status	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3	ROHS3
REACH Status	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected	Unaffected

Engineering Selection Recommendations

All substitute and equivalent parts listed have active product or last time buy status with RoHS3 and REACH unaffected compliance. The packages and mounting types are consistent within the category. Moisture Sensitivity Level (MSL) and ECCN/HTSUS codes are within standard expectations for surface-mount operational amplifiers. Selection can proceed based on compliance, package compatibility, and inventory availability as required by project guidelines.

Frequently Asked Questions (FAQ)

Q1: What core parameters are used for substituting the BU7486FV-E2?
Parameters include amplifier type, number of circuits, output type, slew rate, gain bandwidth, current and voltage characteristics, package/footprint, and compliance (RoHS, REACH).

Q2: Are all substitutes RoHS and REACH compliant?
Yes, all substitute part numbers are RoHS3 Compliant and REACH Unaffected.

Q3: Is the mounting and package directly compatible?
All parts are surface mount and use 8-pin TSSOP or very similar packages (8-LSSOP, 8-TSSOP with the same width), ensuring compatibility for layout and assembly.

Q4: Why do slew rate and gain bandwidth values vary?
Differences in slew rate and gain bandwidth are present among substitutes. Selection must ensure these parameters meet specific application needs within the allowed range.

Q5: Is the part status (active or last time buy) relevant?
Active status parts are preferred for longevity of supply. Last time buy status (e.g., LMV358IPW) indicates limited future availability.

Q6: Are supply voltage and output current ranges comparable across substitutes?
All parts support a supply voltage up to 5.5 V and rail-to-rail output. Output current ranges have minor differences as detailed in the comparison table.

Q7: Are there concerns regarding footprint differences?
The 8-LSSOP and 8-TSSOP packages have a width of 0.173", 4.40mm, making them mechanically compatible for most applications in this product category.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message