BU7464SF-E2 Equivalent & Substitute Parts Reference

Part Overview

The BU7464SF-E2 is a CMOS quad amplifier IC from Rohm Semiconductor, categorized under Linear, Amplifiers. It features four amplification channels within a 14-SOP surface-mount package. The device maintains active product status and compliance with RoHS3, REACH, and ECCN EAR99 regulations. A need for alternative models may arise due to supply limitations, different inventory packaging, or design specification requirements within the Linear, Amplifiers component category.

Substiute Parts

BU7464SF-E2
Rohm SemiconductorIn Stock: 961BU7464SF-E2 Datasheet
BU7464SF-E2
Current Part
AD8619WARZ-R7
Analog Devices Inc.In Stock: 1518AD8619WARZ-R7 Datasheet
AD8619WARZ-R7
Similar

Key Parameters

Manufacturer Part Number Manufacturer Category Packaging Amplifier Type Number of Circuits Slew Rate Gain Bandwidth Product Current - Input Bias Voltage - Input Offset Current - Supply Current - Output / Channel Voltage - Supply Span (Min) Voltage - Supply Span (Max) Operating Temperature Mounting Type Package / Case Supplier Device Package RoHS Status Moisture Sensitivity Level (MSL) REACH Status ECCN HTSUS Product Status
BU7464SF-E2 Rohm Semiconductor Linear, Amplifiers Cut Tape (CT) & Digi-Reel® CMOS 4 1V/µs 1 MHz 1 pA 1 mV 600µA 12 mA 1.7 V 5.5 V -40°C ~ 105°C Surface Mount 14-SOIC (0.173", 4.40mm Width) 14-SOP ROHS3 Compliant 1 (Unlimited) REACH Unaffected EAR99 8542.33.0001 Active

Substitute Part Grouping Explanation

Substitute parts for BU7464SF-E2 are grouped exclusively according to objective, supplied parameters: CMOS amplifier type, quad (4-channel) configuration, compatible supply voltage, equivalent package case size, mount type, product compliance information, and active status. These parameters ensure selection within the Linear, Amplifiers category without deviating from provided specifications.

Parameter Comparison

Manufacturer Part Number Manufacturer Category Amplifier Type Number of Circuits Slew Rate Gain Bandwidth Product Current - Input Bias Voltage - Input Offset Current - Supply Current - Output / Channel Voltage - Supply Span (Min) Voltage - Supply Span (Max) Operating Temperature Mounting Type Package / Case Supplier Device Package RoHS Status Moisture Sensitivity Level (MSL) REACH Status ECCN HTSUS Product Status
BU7464SF-E2 Rohm Semiconductor Linear, Amplifiers CMOS 4 1V/µs 1 MHz 1 pA 1 mV 600µA 12 mA 1.7 V 5.5 V -40°C ~ 105°C Surface Mount 14-SOIC (0.173", 4.40mm Width) 14-SOP ROHS3 Compliant 1 (Unlimited) REACH Unaffected EAR99 8542.33.0001 Active
AD8619WARZ-R7 Analog Devices Inc. Linear, Amplifiers CMOS 4 0.1V/µs 400 kHz 0.2 pA 400 µV 38µA 80 mA 1.8 V 5 V -40°C ~ 125°C Surface Mount 14-SOIC (0.154", 3.90mm Width) 14-SOIC ROHS3 Compliant 1 (Unlimited) REACH Unaffected EAR99 8542.33.0001 Active

Engineering Selection Recommendations

Both BU7464SF-E2 and AD8619WARZ-R7 maintain active product status and are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Moisture Sensitivity Level is 1 (Unlimited), supporting standard surface mount processes. These compliance and regulatory data points support direct part selection based on current inventory and availability, strictly within provided parameters.

Frequently Asked Questions (FAQ)

Q1: What key parameters are used when selecting an equivalent CMOS quad amplifier?
A1: Equivalent selection is based on amplifier type (CMOS), number of circuits (4), compatible supply voltage ranges, mounting type (Surface Mount), package/case size, and compliance information.

Q2: How important is package compatibility in substitution?
A2: Package compatibility ensures correct footprint and board fitment. Only provided package/case details are considered for direct equivalence.

Q3: Are substitute parts guaranteed to operate within the same temperature range?
A3: Substitute parts are compared directly against supplied operating temperature ranges. Design decisions should reference only documented values in this category.

Q4: Does all substitute part selection conform to standard regulatory requirements?
A4: All listed substitutes are documented as RoHS3 compliant, REACH unaffected, have ECCN EAR99, and MSL 1 (Unlimited) status based on provided data.

Q5: Is product status considered in engineering substitution?
A5: Yes. Only components listed as Active within the category are presented as substitutes.

Request Quote (Ships tomorrow)