BTS6163DNT Equivalent & Substitute Parts

Part Overview

The BTS6163DNT is a Power Management Integrated Circuit (PMIC) manufactured by Infineon Technologies, specifically a Power Switch/Driver with 1:1 N-Channel configuration rated for 21.5A output current. This component operates as a high-side switch with on/off interface control, designed for automotive-grade applications with AEC-Q100 qualification.

The BTS6163DNT is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for systems utilizing this component.

Substiute Parts

BTS6163DNT

Infineon TechnologiesIn Stock: 1127BTS6163DNT Datasheet

Current PartRFQ

BTS6163DAUMA1

Infineon TechnologiesIn Stock: 4657BTS6163DAUMA1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BTS6163DNT is determined by strict equivalence across the following critical parameters:

• Manufacturer: Infineon Technologies (same manufacturer ensures design compatibility)
• Series: PROFET® (same product family)
• Output Type: N-Channel, High Side configuration
• Electrical Specifications: 1:1 ratio, 21.5A maximum output current, 16mOhm typical on-resistance
• Load Voltage Range: 5.5V ~ 62V
• Interface: On/Off control, Non-Inverting input
• Protection Features: Current Limiting (Fixed), Over Temperature, Over Voltage
• Operating Temperature: -40°C ~ 150°C (TJ)
• Package: TO-252-5 / DPAK form factor
• Automotive Grade: AEC-Q100 qualified

The BTS6163DAUMA1 meets all these criteria and is classified as a parametric equivalent. The primary distinction is product status: BTS6163DAUMA1 is active production, whereas BTS6163DNT is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The BTS6163DAUMA1 is the direct parametric equivalent for the obsolete BTS6163DNT. Both components share identical electrical specifications, package configuration, and protection features within the PROFET® series.

Selection of BTS6163DAUMA1 is supported by:

• Active production status ensures long-term supply chain availability
• ROHS3 compliance meets current environmental regulations
• Identical electrical and mechanical parameters enable direct substitution
• Same supplier device package (PG-TO252-5-11) and TO-252-5 form factor ensure PCB compatibility without layout modification

For applications requiring automotive-grade certification, verify that the design documentation and qualification records for BTS6163DAUMA1 meet your specific AEC-Q100 requirements, as this certification status is not explicitly stated in the available data.

Frequently Asked Questions (FAQ)

Q: Can BTS6163DAUMA1 be used as a direct replacement for BTS6163DNT?

A: Yes. Both components are identical in electrical specifications, output configuration, current rating, on-resistance, protection features, and package form factor. The primary difference is product status: BTS6163DAUMA1 is in active production while BTS6163DNT is obsolete.

Q: Are there any PCB layout changes required when substituting BTS6163DAUMA1 for BTS6163DNT?

A: No. Both components use the same supplier device package (PG-TO252-5-11) and TO-252-5 form factor. PCB footprints are identical, and no layout modifications are necessary.

Q: What is the difference in packaging between the two parts?

A: BTS6163DNT packaging is listed as unspecified. BTS6163DAUMA1 is supplied in Cut Tape (CT) and Digi-Reel® packaging formats. Both use the same physical TO-252-5 package configuration.

Q: Does BTS6163DAUMA1 meet automotive qualification standards?

A: BTS6163DAUMA1 carries ROHS3 compliance. Automotive-grade certification (AEC-Q100) is not explicitly stated in the available data. Consult Infineon Technologies documentation or your supplier for complete qualification details if automotive certification is a design requirement.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution is determined by: 1:1 input-output ratio, N-Channel high-side output configuration, 21.5A maximum output current, 16mOhm typical on-resistance, 5.5V to 62V load voltage range, on/off interface control, and identical fault protection (current limiting, over-temperature, over-voltage).

Q: Is moisture sensitivity a consideration when selecting between these parts?

A: BTS6163DNT has MSL 1 (Unlimited). BTS6163DAUMA1 has MSL 3 (168 Hours). For applications with extended storage or high-humidity environments, verify that MSL 3 handling and storage requirements are compatible with your manufacturing and logistics processes.