BTE-060-03-L-D-A-TR Equivalent & Substitute Parts

Part Overview

The BTE-060-03-L-D-A-TR is a 120-position rectangular connector header manufactured by Samtec Inc., designed for surface mount applications with outer shroud contacts and gold plating. This connector is classified as an active product with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified based on identical electrical and mechanical specifications, with variations limited to packaging configuration.

Substiute Parts

BTE-060-03-L-D-A-TR

Samtec Inc.In Stock: 836BTE-060-03-L-D-A-TR Datasheet

Current PartRFQ

BTE-060-03-L-D-A

Samtec Inc.In Stock: 1126BTE-060-03-L-D-A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BTE-060-03-L-D-A-TR is determined by strict equivalence across the following critical parameters:

• Number of positions: 120
• Pitch specification: 0.031" (0.80mm)
• Number of rows: 2
• Connector type: Header with outer shroud contacts
• Mounting type: Surface mount
• Contact finish: Gold at 10.0µin (0.25µm) thickness
• Height above board: 0.396" (10.06mm)
• Mated stacking height: 11.03mm
• Board guide feature presence
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The identified substitute part differs only in packaging configuration (Tray versus Tape & Reel), which does not affect electrical or mechanical performance in the application.

Parameter Comparison

Engineering Selection Recommendations

Both the BTE-060-03-L-D-A-TR and BTE-060-03-L-D-A are active products with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability. The Tape & Reel packaging (TR) variant is suitable for automated assembly processes, while the Tray packaging variant accommodates manual or alternative handling workflows. Both parts maintain full RoHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory and environmental compatibility across applications.

Frequently Asked Questions (FAQ)

Q: Can BTE-060-03-L-D-A be used as a direct replacement for BTE-060-03-L-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Tray. This distinction does not affect connector performance, pin configuration, or board-level compatibility.

Q: What determines substitution eligibility for this connector series?

A: Substitution is valid when the following parameters remain constant: position count (120), pitch (0.031"/0.80mm), row configuration (2), connector type (header with outer shroud), mounting method (surface mount), contact finish (gold at 10.0µin), and physical dimensions (height above board and mated stacking height). Packaging format is not a limiting factor for electrical substitution.

Q: Are there compliance differences between the two parts?

A: No. Both parts carry identical RoHS3 compliance status, REACH unaffected designation, and MSL rating of 1 (Unlimited). Regulatory and environmental certifications are equivalent.

Q: How does packaging affect component selection?

A: Packaging choice impacts supply chain logistics and assembly methodology. Tape & Reel packaging is optimized for high-volume automated pick-and-place assembly. Tray packaging is suitable for lower-volume production, manual assembly, or applications where reel-based handling is not required. Electrical and mechanical performance remains unchanged regardless of packaging format.

Q: What is the base product number for this connector?

A: The base product number is BTE-060. Both the main part and substitute share this base designation, confirming their fundamental design equivalence.