BTE-060-01-F-D-A-TR Equivalent & Substitute Parts

Part Overview

The BTE-060-01-F-D-A-TR is a 120-position rectangular connector header manufactured by Samtec Inc., designed for surface mount applications with outer shroud contacts and gold plating. This connector is classified as an active product with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications to ensure direct functional interchangeability in circuit board assembly applications.

Substiute Parts

BTE-060-01-F-D-A-TR

Samtec Inc.In Stock: 1133BTE-060-01-F-D-A-TR Datasheet

Current PartRFQ

BTE-060-01-F-D-A-K-TR

Samtec Inc.In Stock: 1144BTE-060-01-F-D-A-K-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BTE-060-01-F-D-A-TR are identified based on matching the following critical parameters:

• Number of Positions: 120
• Pitch: 0.031" (0.80mm)
• Number of Rows: 2
• Connector Type: Header, Outer Shroud Contacts
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 3.00µin (0.076µm)
• Height Above Board: 0.160" (4.06mm)
• Mated Stacking Heights: 5.03mm
• Features: Board Guide
• Series: BTE
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part BTE-060-01-F-D-A-K-TR differs only in packaging format (Cut Tape vs. Tape & Reel), maintaining identical electrical and mechanical specifications. This variation allows for alternative procurement and inventory management without affecting functional performance or board-level compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the BTE-060-01-F-D-A-TR and BTE-060-01-F-D-A-K-TR are active products with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and procurement logistics rather than functional performance.

The BTE-060-01-F-D-A-TR in Tape & Reel packaging is suitable for high-volume automated assembly operations. The BTE-060-01-F-D-A-K-TR in Cut Tape packaging accommodates lower-volume applications or manual assembly processes.

Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, ensuring compatibility with current manufacturing standards and environmental regulations.

Frequently Asked Questions (FAQ)

Q: Can BTE-060-01-F-D-A-K-TR be used as a direct replacement for BTE-060-01-F-D-A-TR?

A: Yes. Both parts share identical electrical and mechanical specifications, including position count, pitch, connector type, mounting configuration, contact finish, and board height. The only difference is packaging format.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging is optimized for automated pick-and-place assembly equipment. Cut Tape packaging provides individual component segments and is typically used for lower-volume production or manual assembly processes. Both formats contain the same component.

Q: Are there any compliance differences between these substitute parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity ratings (MSL 1, Unlimited). They meet the same regulatory and environmental standards.

Q: Does packaging format affect board-level performance?

A: No. Packaging format affects only procurement, handling, and assembly logistics. Once assembled on the board, both parts perform identically.

Q: What are the critical parameters for substitution compatibility?

A: The 120-position count, 0.031" (0.80mm) pitch, 2-row configuration, gold contact finish, surface mount mounting type, and 0.160" (4.06mm) height above board are the defining parameters. Any variation in these specifications indicates a non-equivalent part.