BSP75GQTC Equivalent & Substitute Parts

Part Overview

The BSP75GQTC is an N-Channel power MOSFET driver manufactured by Diodes Incorporated, designed for general-purpose switching applications in automotive-grade power management systems. This device operates at 60V maximum load voltage with 1.6A output current and features integrated fault protection including current limiting, over-temperature, and over-voltage protection. The part is actively produced and widely used in automotive applications requiring AEC-Q101 qualification. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set.

Substiute Parts

BSP75GQTC

Diodes IncorporatedIn Stock: 635BSP75GQTC Datasheet

Current PartRFQ

BSP75GQTA

Diodes IncorporatedIn Stock: 3355BSP75GQTA Datasheet

Parametric EquivalentRFQ

BSP75GTA

Diodes IncorporatedIn Stock: 41715BSP75GTA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BSP75GQTC are identified based on strict equivalence across the following critical parameters:

• Output Type: N-Channel
• Voltage - Load: 60V (Max)
• Current - Output: 1.6A
• Rds On (Typ): 550mOhm
• Output Configuration: Low Side
• Package: SOT-223-3
• Operating Temperature Range: -40°C ~ 150°C (TJ)
• Fault Protection: Current Limiting (Fixed), Over Temperature, Over Voltage
• Series: INTELLIFET®
• Mounting Type: Surface Mount

The identified substitutes maintain identical electrical specifications and thermal characteristics. Packaging variations (Tape & Reel versus Cut Tape & Digi-Reel) represent supply format differences only and do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

All three parts—BSP75GQTC, BSP75GQTA, and BSP75GTA—are active production devices from Diodes Incorporated with identical electrical and thermal specifications. Selection between these parts is determined by packaging and supply format requirements:

• BSP75GQTC: Supplied in Tape & Reel (TR) format with 612 pcs available inventory
• BSP75GQTA: Supplied in Tape & Reel (TR) format with 3300 pcs available inventory
• BSP75GTA: Supplied in Cut Tape (CT) & Digi-Reel® format with 41700 pcs available inventory

All parts maintain AEC-Q101 automotive qualification and ROHS3 compliance. The BSP75GTA variant offers the highest inventory availability and alternative packaging format for applications where Cut Tape supply is acceptable.

Frequently Asked Questions (FAQ)

Q: Can BSP75GQTA be used as a direct replacement for BSP75GQTC?

A: Yes. Both parts are electrically and mechanically identical, with identical SOT-223-3 packaging, 60V maximum load voltage, 1.6A output current, and 550mOhm typical on-resistance. The difference is supply format: BSP75GQTA is available in higher inventory quantities in Tape & Reel format.

Q: What is the difference between BSP75GQTA and BSP75GTA?

A: The electrical specifications are identical. The primary difference is packaging format: BSP75GQTA is supplied in Tape & Reel (TR), while BSP75GTA is supplied in Cut Tape (CT) & Digi-Reel® format. Both use SOT-223-3 package geometry.

Q: Are these parts suitable for automotive applications?

A: Yes. All three parts carry automotive grade classification and AEC-Q101 qualification, meeting automotive industry standards for reliability and performance.

Q: Can I substitute these parts in existing designs without PCB layout changes?

A: Yes. All three parts use identical SOT-223-3 surface mount packaging with the same pin configuration and footprint requirements.

Q: What is the moisture sensitivity level for these parts?

A: All three parts have MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage and handling.

Q: Are these parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant and REACH unaffected.