BSH201,215 P-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The BSH201,215 is a P-Channel MOSFET manufactured by Nexperia USA Inc., rated for 60V drain-to-source voltage with 300mA continuous drain current in a TO-236AB surface mount package. This device is classified as "Not For New Designs," indicating it has reached end-of-life status. Identification of equivalent and substitute parts is necessary for ongoing maintenance, repair, and legacy system support where the original component is no longer readily available or where design flexibility permits alternative solutions.

Substiute Parts

BSH201,215

Nexperia USA Inc.In Stock: 9911BSH201,215 Datasheet

Current PartRFQ

NTR0202PLT1G

onsemiIn Stock: 32321NTR0202PLT1G Datasheet

SimilarRFQ

PJA3439_R1_00001

Panjit International Inc.In Stock: 26464PJA3439_R1_00001 Datasheet

SimilarRFQ

RSE002P03TL

Rohm SemiconductorIn Stock: 20277RSE002P03TL Datasheet

SimilarRFQ

RSU002P03T106

Rohm SemiconductorIn Stock: 734415RSU002P03T106 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BSH201,215 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• FET Type: P-Channel (mandatory match)
• Drain to Source Voltage (Vdss): Must equal or exceed 60V
• Continuous Drain Current (Id): Must equal or exceed 300mA at 25°C
• Package / Case: Surface mount package compatible with TO-236-3, SC-59, or SOT-23-3 footprints
• Operating Temperature Range: Must support -55°C to 150°C
• RoHS Compliance: ROHS3 Compliant status required

Secondary Electrical Parameters for Compatibility Assessment:

• Rds On (Max): Lower values indicate improved performance; values at or below 2.5 Ohm @ 160mA, 10V are preferred
• Vgs(th): Gate threshold voltage; values at or below 1V @ 1mA indicate faster switching response
• Gate Charge (Qg): Lower values reduce gate drive requirements; 3nC @ 10V is the reference
• Power Dissipation (Max): Must support thermal requirements of 417mW or greater

The substitute parts listed below are grouped based on their ability to meet these criteria within the constraints of available component specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Electrical and Package Compatibility):

The PJA3439_R1_00001 from Panjit International Inc. is the most direct substitute for the BSH201,215. Both devices share identical Vdss (60V) and Id (300mA) ratings, operate across the same temperature range (-55°C to 150°C), and are housed in compatible SOT-23-3 packages. The PJA3439_R1_00001 is currently in Active product status, ensuring long-term availability. Power dissipation is rated at 500mW, exceeding the BSH201,215 specification of 417mW. This part is suitable for direct replacement in existing designs without circuit modification.

The NTR0202PLT1G from onsemi is compatible in package format (SOT-23-3) and operating temperature range but has reduced voltage rating (20V vs. 60V) and lower power dissipation (225mW vs. 417mW). This substitute is applicable only in circuits where the maximum drain-to-source voltage does not exceed 20V and power dissipation requirements are lower than 225mW. The NTR0202PLT1G offers superior on-resistance (0.8 Ohm) and lower gate charge (2.18nC), making it suitable for low-voltage, high-efficiency applications within its voltage constraints.

Partial Substitutes (Voltage or Current Derating Required):

The RSE002P03TL and RSU002P03T106 from Rohm Semiconductor both feature reduced Vdss ratings (30V vs. 60V) and lower continuous drain current capabilities (200mA and 250mA respectively vs. 300mA). These parts are suitable only in applications where the circuit operates at voltages not exceeding 30V and drain currents do not exceed their respective ratings. Both devices are in Active product status. The RSU002P03T106 offers higher current capacity (250mA) compared to the RSE002P03TL (200mA) and is available in significantly higher inventory (734,400 pcs vs. 20,229 pcs).

Compliance and Availability:

All substitute parts maintain ROHS3 compliance and REACH unaffected status, matching the environmental and regulatory requirements of the original BSH201,215. The PJA3439_R1_00001 is recommended as the primary substitute due to electrical equivalence and active product status. The NTR0202PLT1G, RSE002P03TL, and RSU002P03T106 are conditional substitutes dependent on circuit voltage and current requirements.

Frequently Asked Questions (FAQ)

Q: Can the NTR0202PLT1G replace the BSH201,215 in all applications?

A: No. The NTR0202PLT1G has a maximum Vdss rating of 20V, compared to the BSH201,215's 60V rating. It is suitable only for circuits operating at 20V or below. If your circuit requires 60V capability, the NTR0202PLT1G will not function correctly and may fail.

Q: What is the primary advantage of the PJA3439_R1_00001 as a substitute?

A: The PJA3439_R1_00001 matches the BSH201,215 in both Vdss (60V) and Id (300mA) ratings, operates across the same temperature range, and uses a compatible SOT-23-3 package. It is currently in Active product status, ensuring availability. No circuit modifications are required for direct substitution.

Q: Are the Rohm Semiconductor parts (RSE002P03TL and RSU002P03T106) suitable for 60V applications?

A: No. Both Rohm parts have a maximum Vdss rating of 30V. They are not suitable for applications requiring 60V operation. They are applicable only in circuits designed for 30V maximum operation.

Q: What is the difference between the RSE002P03TL and RSU002P03T106?

A: Both are Rohm P-Channel MOSFETs with 30V Vdss ratings. The RSU002P03T106 supports higher continuous drain current (250mA vs. 200mA) and higher power dissipation (200mW vs. 150mW). The RSU002P03T106 is packaged in SC-70 (SOT-323), while the RSE002P03TL uses SC-75 (SOT-416). Package footprints are not interchangeable.

Q: Can I use the NTR0202PLT1G in a 60V circuit if I derate the voltage?

A: No. The Vdss rating of 20V is an absolute maximum rating. Operating the device at voltages exceeding this specification will result in device failure. The part cannot be used in 60V circuits under any derating condition.

Q: Is the PJA3439_R1_00001 a pin-for-pin replacement?

A: Yes. The PJA3439_R1_00001 is housed in a SOT-23-3 package, which is electrically and mechanically compatible with the BSH201,215's TO-236-3 (SC-59) package. Pin assignments are identical for P-Channel MOSFET configurations in this package type.

Q: What is the inventory status of these substitute parts?

A: The PJA3439_R1_00001 has 26,418 pcs in stock. The NTR0202PLT1G has 32,300 pcs in stock. The RSU002P03T106 has the highest inventory at 734,400 pcs. The RSE002P03TL has 20,229 pcs in stock. All parts are listed as new original stock.

Q: Do all substitute parts meet RoHS compliance requirements?

A: Yes. All listed substitute parts (NTR0202PLT1G, PJA3439_R1_00001, RSE002P03TL, and RSU002P03T106) are ROHS3 compliant and REACH unaffected, matching the environmental compliance of the original BSH201,215.

Q: What is the key difference in gate charge between the main part and substitutes?

A: The BSH201,215 has a gate charge of 3nC @ 10V. The PJA3439_R1_00001 has 1.1nC @ 4.5V, indicating faster switching response. The NTR0202PLT1G has 2.18nC @ 10V. Gate charge specifications are not provided for the Rohm parts (RSE002P03TL and RSU002P03T106).

Q: Which substitute offers the lowest on-resistance?

A: The NTR0202PLT1G offers the lowest on-resistance at 0.8 Ohm @ 200mA, 10V. However, this part is limited to 20V operation. For 60V operation, the PJA3439_R1_00001 is the direct substitute with 4 Ohm @ 500mA, 10V on-resistance.