BS-33-6-NB Equivalent & Substitute Parts

Part Overview

The BS-33-6-NB is a yellow insulated spade terminal connector manufactured by 3M, designed for crimp termination of 10-12 AWG wire onto a 6 stud. This component is classified as an active product and is ROHS3 compliant. Equivalent parts may be required due to inventory availability, supply chain considerations, or specific application requirements where alternative manufacturers' offerings meet identical electrical and mechanical specifications.

Substiute Parts

BS-33-6-NB

3MIn Stock: 1015BS-33-6-NB Datasheet

Current PartRFQ

PNF10-6F-L

Panduit CorpIn Stock: 1778PNF10-6F-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BS-33-6-NB is determined by the following critical parameters:

• Stud/Tab Size: Must be 6 Stud
• Wire Gauge: Must accommodate 10-12 AWG
• Termination Method: Must be Crimp
• Insulation Type: Must be Insulated
• Color: Must be Yellow
• Insulation Material: Must be Polyamide (PA), Nylon
• Mounting Type: Must be Free Hanging (In-Line)
• Terminal Type: Must be Standard

The substitute part PNF10-6F-L from Panduit Corp meets all these critical parameters and is therefore classified as an equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the BS-33-6-NB and PNF10-6F-L are active products with ROHS3 compliance and identical export classification (EAR99). Selection between these parts should be based on:

• Availability: PNF10-6F-L currently has higher inventory (1677 pcs vs. 957 pcs)
• Compliance Requirements: Both meet ROHS3 and identical tariff classification
• Mechanical Compatibility: Both parts are dimensionally and functionally equivalent for 10-12 AWG crimp termination onto 6 studs

The PNF10-6F-L includes additional documented specifications (serrated termination feature, tin contact finish, copper contact material) that are not specified for the BS-33-6-NB but do not preclude substitution.

Frequently Asked Questions (FAQ)

Q: Can PNF10-6F-L be used as a direct replacement for BS-33-6-NB?

A: Yes. Both parts meet the critical substitution parameters: 6 stud size, 10-12 AWG wire gauge, crimp termination, yellow insulated nylon construction, and free-hanging mounting configuration.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, classified under ECCN EAR99, and share the same HTSUS code (8536.90.4000).

Q: What is the significance of the serrated termination feature on the PNF10-6F-L?

A: The serrated termination on PNF10-6F-L is an additional feature not specified for the BS-33-6-NB. This feature does not prevent substitution and may provide enhanced mechanical grip in certain applications.

Q: Are the physical dimensions identical?

A: The PNF10-6F-L provides documented dimensional specifications (0.310" outer width, 1.010" overall length, 0.225" insulation diameter, 0.150" tongue opening). The BS-33-6-NB does not specify these dimensions in the provided data. Both parts are functionally equivalent for the specified wire gauge and stud size.

Q: What packaging is available for these parts?

A: Both parts are supplied in bulk packaging.