BS-23-8-P Equivalent & Substitute Parts

Part Overview

The BS-23-8-P is a yellow 8 stud spade terminal connector manufactured by 3M, designed for crimp termination of 10-12 AWG wire. This flanged, insulated terminal is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where the core functional requirements remain constant.

Substiute Parts

BS-23-8-P

3MIn Stock: 1031BS-23-8-P Datasheet

Current PartRFQ

8252

Keystone ElectronicsIn Stock: 8428252 Datasheet

MFR RecommendedRFQ

PV10-8FF-L

Panduit CorpIn Stock: 1071PV10-8FF-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BS-23-8-P are qualified based on the following critical parameters:

• Stud/Tab Size: 8 Stud (electrical contact point compatibility)
• Wire Gauge: 10-12 AWG (termination capacity)
• Terminal Type: Flanged (mechanical form factor)
• Termination Method: Crimp (assembly process compatibility)
• Insulation: Insulated (electrical safety requirement)
• Color: Yellow (industry standard for 10-12 AWG identification)
• Contact Material: Copper (electrical conductivity)
• Contact Finish: Tin (corrosion resistance and solderability)
• Mounting Type: Free Hanging (In-Line) (installation configuration)
• Material - Insulation: Vinyl (environmental resistance)
• RoHS Status: ROHS3 Compliant (regulatory requirement)

All identified substitutes maintain these core parameters. Variations in dimensional specifications (width, length, insulation diameter) that do not affect electrical performance or mechanical fit are permissible within substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

All three parts—BS-23-8-P (3M), 8252 (Keystone Electronics), and PV10-8FF-L (Panduit Corp)—are Active product status and RoHS3 compliant, meeting current regulatory requirements.

The BS-23-8-P and PV10-8FF-L share identical overall length (1.030"), while the 8252 is shorter at 0.840". The BS-23-8-P and 8252 share identical width (0.320"), whereas the PV10-8FF-L is wider at 0.370". Insulation diameter varies across all three: BS-23-8-P at 0.250", 8252 at 0.255", and PV10-8FF-L at 0.225".

Selection between these substitutes depends on mechanical fit requirements within the specific application assembly. All three maintain equivalent electrical performance for 10-12 AWG crimp termination on 8 stud connections.

Frequently Asked Questions (FAQ)

Q: Can the 8252 (Keystone Electronics) replace the BS-23-8-P in all applications?

A: The 8252 is electrically equivalent but has a shorter overall length (0.840" vs. 1.030"). Substitution is valid only if the application assembly accommodates this dimensional difference without affecting mechanical fit or electrical connection integrity.

Q: What is the primary difference between the PV10-8FF-L and the BS-23-8-P?

A: The PV10-8FF-L has a wider outer edge dimension (0.370" vs. 0.320") and a smaller insulation diameter (0.225" vs. 0.250"). Both are functionally equivalent for 10-12 AWG crimp termination on 8 stud connections, provided the application assembly accommodates these dimensional variations.

Q: Are all three parts RoHS3 compliant?

A: Yes. The BS-23-8-P, 8252, and PV10-8FF-L are all RoHS3 compliant, meeting current environmental and regulatory standards.

Q: What wire gauge range do these terminals support?

A: All three terminals are rated for 10-12 AWG wire gauge, ensuring consistent termination capacity across all substitute options.

Q: Do these terminals require specific crimping tools?

A: All three terminals use crimp termination. Compatibility with existing crimping equipment depends on the specific tool specifications and the dimensional characteristics of each terminal. Refer to the tool manufacturer's documentation for compatibility confirmation.

Q: What is the stud size for all these terminals?

A: All three terminals feature an 8 stud connection point, ensuring electrical compatibility with standard 8 stud receptacles and connectors.