BP5250 Equivalent & Substitute Parts Reference

Part Overview

The BP5250 from Rohm Semiconductor is a non-isolated Point-of-Load (PoL) DC-DC converter module with a single 5V, 2A output, designed for ITE (Commercial) applications. The product is currently classified as obsolete, making it necessary to identify suitable alternative DC-DC converter modules with matching electrical and mechanical characteristics to ensure continued support and operational compatibility in existing designs.

Substiute Parts

BP5250

Rohm SemiconductorIn Stock: 997BP5250 Datasheet

Current PartRFQ

R-525.0PA

Recom PowerIn Stock: 1014R-525.0PA Datasheet

SimilarRFQ

R-725.0P

Recom PowerIn Stock: 1005R-725.0P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by matching or exceeding the main operational and mechanical characteristics: Output Voltage (5V), Output Current (2A), Non-Isolated PoL type, Single Output configuration, Input Voltage Range encompassing the original range, Operating Temperature (-40°C ~ 85°C), Through Hole mounting, and regulatory compliance status (RoHS3, MSL 1, REACH Unaffected). Package style differences (SIP pin count and dimensions) are provided for comparison.

Parameter Comparison

Engineering Selection Recommendations

The BP5250 is classified as obsolete, while both R-525.0PA and R-725.0P are active products. All options are compliant with ROHS3 and REACH, and have MSL 1 (Unlimited). Inventory is available for all compared parts. Regulatory status and moisture sensitivity levels are consistent, and all are suitable for through-hole applications.

Frequently Asked Questions (FAQ)

Q1: What are the key electrical criteria for substituting the BP5250?
A1: Output voltage (5V), output current (2A), input voltage range covering 8V to 16V, and operating temperature range (-40°C ~ 85°C).

Q2: Are the suggested substitutes mechanically compatible with the BP5250?
A2: All substitutes use SIP through-hole mounting, but differ in pin count and physical dimensions. Mechanical fit and pin configuration should be reviewed for direct PCB compatibility.

Q3: Do substitute parts have equivalent feature sets?
A3: All parts are non-isolated PoL DC-DC converter modules with single 5V/2A output for ITE (Commercial) use. Feature differences may exist but are not specified in exclusive substitution criteria.

Q4: What compliance and environmental regulations do the substitutes meet?
A4: All listed parts are ROHS3 Compliant, MSL 1 (Unlimited), and REACH Unaffected.

Q5: Does package difference affect substitution?
A5: The package type affects mechanical and layout compatibility (7-SIP versus 12-SIP modules). Physical dimensions and pin configurations should match the design’s requirements.