BP 104 FASR R33-Z Equivalent & Substitute Parts

Part Overview

The BP 104 FASR R33-Z is a photodiode optical sensor manufactured by ams-OSRAM USA INC., designed for 880nm infrared detection applications. This component features a PIN diode configuration with a 20ns response time and 120° viewing angle in a 2-SMD surface mount package with Z-Bend configuration.

The BP 104 FASR R33-Z is classified as obsolete. Locating equivalent or substitute parts is necessary to support ongoing production requirements, maintenance operations, and system redesigns where this component is specified.

Substiute Parts

BP 104 FASR R33-Z

ams-OSRAM USA INC.In Stock: 876BP 104 FASR R33-Z Datasheet

Current PartRFQ

BP 104 FASR-Z

ams-OSRAM USA INC.In Stock: 7134BP 104 FASR-Z Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BP 104 FASR R33-Z is determined by equivalence across the following critical parameters:

• Wavelength and spectral range (880nm center wavelength, 730nm ~ 1100nm spectral response)
• Diode type (PIN configuration)
• Response time (20ns)
• Maximum reverse voltage (20 V)
• Dark current characteristics (2nA typical)
• Active area (4.84mm²)
• Viewing angle (120°)
• Operating temperature range (-40°C ~ 100°C)
• Surface mount package configuration (2-SMD, Z-Bend)

The BP 104 FASR-Z meets all these electrical and mechanical parameters and qualifies as a direct substitute for the obsolete BP 104 FASR R33-Z.

Parameter Comparison

Engineering Selection Recommendations

The BP 104 FASR-Z is the direct substitute for the obsolete BP 104 FASR R33-Z. Both components are manufactured by ams-OSRAM USA INC. and share identical electrical and mechanical specifications across all critical parameters.

The BP 104 FASR-Z maintains active product status, ensuring ongoing availability and supply chain continuity. This substitute is packaged in Tape & Reel (TR) format with ROHS3 compliance, REACH unaffected status, and EAR99 ECCN classification. The moisture sensitivity level is rated at MSL 4 (72 Hours).

Selection of the BP 104 FASR-Z eliminates obsolescence risk while maintaining full functional and physical compatibility with applications originally designed for the BP 104 FASR R33-Z.

Frequently Asked Questions (FAQ)

Q: Are the BP 104 FASR R33-Z and BP 104 FASR-Z electrically identical?

A: Yes. Both components share identical wavelength (880nm), response time (20ns), maximum reverse voltage (20 V), dark current (2nA), active area (4.84mm²), viewing angle (120°), and operating temperature range (-40°C ~ 100°C).

Q: Can the BP 104 FASR-Z be used as a direct replacement in existing PCB designs?

A: Yes. The BP 104 FASR-Z maintains the same 2-SMD, Z-Bend surface mount package configuration and footprint as the BP 104 FASR R33-Z, enabling direct substitution without PCB redesign.

Q: What is the difference between the two part numbers?

A: The BP 104 FASR R33-Z is obsolete, while the BP 104 FASR-Z is active. The primary difference is product status and packaging format (the substitute is supplied in Tape & Reel format). All electrical and mechanical specifications remain equivalent.

Q: Are there compliance differences between these parts?

A: The BP 104 FASR-Z includes documented ROHS3 compliance, REACH unaffected status, and EAR99 ECCN classification. These certifications support regulatory requirements for new production and procurement.

Q: What is the moisture sensitivity level of the substitute part?

A: The BP 104 FASR-Z has a moisture sensitivity level (MSL) of 4, rated for 72 hours of exposure. This specification applies to storage and handling conditions prior to soldering.