BNC(75)-PLR-PC-12G Equivalent & Substitute Parts

Part Overview

The BNC(75)-PLR-PC-12G is a BNC connector jack (female socket) rated for 75 ohms impedance, designed for panel mount through-hole applications with right-angle solder termination. This coaxial RF connector operates up to 12 GHz and is manufactured by Hirose Electric Co Ltd. The part is currently active in production with 1086 pieces in stock. Substitute parts are identified based on matching electrical specifications, mechanical mounting characteristics, and compliance certifications to ensure direct interchangeability in RF applications.

Substiute Parts

BNC(75)-PLR-PC-12G

Hirose Electric Co LtdIn Stock: 1159BNC(75)-PLR-PC-12G Datasheet

Current PartRFQ

BNC(75)-PLR-PC(D)-12G-3

Hirose Electric Co LtdIn Stock: 500339BNC(75)-PLR-PC(D)-12G-3 Datasheet

Parametric EquivalentRFQ

BNC(75)-PLR-PC-12G-2

Hirose Electric Co LtdIn Stock: 40357BNC(75)-PLR-PC-12G-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BNC(75)-PLR-PC-12G are qualified based on the following critical parameters that determine functional interchangeability:

• Electrical Specifications: Impedance (75 Ohms), frequency rating (12 GHz), and contact materials (Beryllium Copper with gold plating)
• Mechanical Compatibility: Connector style (BNC), connector type (Jack, Female Socket), mounting configuration (Panel Mount, Through Hole, Right Angle), and fastening method (Bayonet Lock)
• Termination Method: Solder contact and shield termination
• Environmental Ratings: Operating temperature range (-40°C ~ 85°C) and dielectric material (SPS)
• Compliance Status: RoHS compliance and regulatory certifications (ECCN, HTSUS)

All substitute parts maintain identical electrical and mechanical specifications, ensuring direct replacement capability in RF coaxial applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—BNC(75)-PLR-PC-12G, BNC(75)-PLR-PC-12G-2, and BNC(75)-PLR-PC(D)-12G-3—are active production parts from Hirose Electric Co Ltd with identical electrical and mechanical specifications. Selection between these parts should be based on:

Compliance Considerations: The main part BNC(75)-PLR-PC-12G carries RoHS Compliant status, while both substitute parts carry ROHS3 Compliant certification. ROHS3 represents an updated compliance standard and is fully backward compatible with RoHS applications.

Regulatory Alignment: All parts share identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications, ensuring consistent regulatory treatment across procurement and export scenarios.

Availability: BNC(75)-PLR-PC(D)-12G-3 offers the highest inventory level (500,300 pieces), followed by BNC(75)-PLR-PC-12G-2 (40,300 pieces), with the main part at 1,086 pieces. Inventory levels may influence lead time and supply chain continuity decisions.

Moisture Sensitivity: The substitute parts specify MSL 1 (Unlimited), indicating superior moisture handling characteristics compared to the main part's Not Applicable designation.

Frequently Asked Questions (FAQ)

Q: Can BNC(75)-PLR-PC-12G-2 and BNC(75)-PLR-PC(D)-12G-3 be used interchangeably with BNC(75)-PLR-PC-12G?

A: Yes. All three parts maintain identical impedance (75 Ohms), frequency rating (12 GHz), connector type (BNC Jack, Female Socket), mounting configuration (Panel Mount, Through Hole, Right Angle), and termination method (Solder). They are functionally equivalent for RF coaxial applications.

Q: What is the difference between RoHS and ROHS3 compliance?

A: ROHS3 represents the current revision of the RoHS directive with updated substance restrictions. ROHS3 compliant parts are fully compatible with applications requiring RoHS compliance and represent the current manufacturing standard.

Q: Are there any mechanical differences between these parts?

A: No. All three parts share identical mechanical specifications including body material (Zinc Alloy), body finish (Nickel), center contact material (Beryllium Copper), center contact plating (Gold), dielectric material (SPS), housing color (Silver), and mounting feature (Flange).

Q: Which part should be selected for new designs?

A: For new designs, either BNC(75)-PLR-PC-12G-2 or BNC(75)-PLR-PC(D)-12G-3 is recommended due to ROHS3 compliance alignment with current regulatory standards and superior inventory availability.

Q: Do these parts require different PCB footprints or mounting procedures?

A: No. All three parts are panel mount through-hole connectors with identical right-angle solder termination. They use the same PCB footprint and mounting procedure.

Q: What is the operating temperature range for all substitute parts?

A: All parts operate across the identical temperature range of -40°C to 85°C, ensuring consistent thermal performance across applications.