BLE18PS080SH1D Equivalent & Substitute Parts

Part Overview

The BLE18PS080SH1D is a single-line power line ferrite bead manufactured by Murata Electronics as part of the EMIFIL® BLE18 series. This surface mount component operates at 8.5 Ohms impedance at 100 MHz with a maximum current rating of 8A and DC resistance of 4mOhm. The part is packaged in 0603 (1608 Metric) form factor and is designed for automotive applications with AEC-Q200 qualification. The component is currently active in production. Equivalent substitute parts are identified to support procurement flexibility, supply chain continuity, and design alternatives when the primary part number becomes unavailable or when inventory constraints require alternative sourcing.

Substiute Parts

BLE18PS080SH1D

Murata ElectronicsIn Stock: 1241BLE18PS080SH1D Datasheet

Current PartRFQ

BLE18PS080SZ1D

Murata ElectronicsIn Stock: 3939BLE18PS080SZ1D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BLE18PS080SH1D is determined by strict parametric equivalence across all critical electrical and mechanical specifications. The following parameters establish the substitution criteria:

Electrical Parameters:

• Impedance value: 8.5 Ohms @ 100 MHz
• Current rating: 8A maximum
• DC resistance: 4mOhm maximum

Mechanical Parameters:

• Package type: 0603 (1608 Metric)
• Mounting type: Surface Mount
• Physical dimensions: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Height: 0.030" (0.75mm) maximum

Compliance & Environmental Parameters:

• AEC-Q200 automotive qualification
• Operating temperature range: -55°C ~ 125°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Substitute parts must match all parameters listed above without deviation. The BLE18PS080SH1D belongs to the EMIFIL® BLE18 series single-line power line ferrite bead category. Substitutes are limited to parts within this same series and category that maintain identical electrical performance and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The BLE18PS080SZ1D is a direct parametric equivalent to the BLE18PS080SH1D. Both parts are manufactured by Murata Electronics within the EMIFIL® BLE18 series and maintain identical electrical specifications, mechanical dimensions, and compliance certifications. Both parts carry AEC-Q200 automotive qualification and are RoHS3 compliant, making them suitable for automotive power line filtering applications operating across the -55°C to 125°C temperature range.

Selection between these two part numbers should be based on procurement availability and inventory status. The BLE18PS080SZ1D currently maintains higher inventory levels (3832 Pcs) compared to the BLE18PS080SH1D (1144 Pcs), which may influence sourcing decisions for high-volume production requirements. Both parts are active in production status and carry identical compliance and environmental ratings.

Frequently Asked Questions (FAQ)

Q: Can BLE18PS080SZ1D be used as a direct replacement for BLE18PS080SH1D?

A: Yes. The BLE18PS080SZ1D is a parametric equivalent with identical electrical performance (8.5 Ohms @ 100 MHz, 8A current rating, 4mOhm DCR), mechanical dimensions (0603 package, 1.60mm x 0.80mm), and compliance certifications (AEC-Q200, RoHS3). Direct substitution is supported without circuit modification.

Q: Are there any differences in the packaging or tape specifications between these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging format. The physical package dimensions and mounting specifications are identical. No changes to assembly or handling procedures are required when switching between these part numbers.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both BLE18PS080SH1D and BLE18PS080SZ1D carry AEC-Q200 qualification and are rated for automotive applications. Both operate across the -55°C to 125°C temperature range and maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the difference between the part numbers SH1D and SZ1D?

A: The suffix designations (SH1D versus SZ1D) represent different manufacturing batches or tape reel configurations within the same EMIFIL® BLE18 series. All electrical and mechanical parameters remain identical. The suffix does not indicate functional or performance differences.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Both parts use identical 0603 (1608 Metric) surface mount packaging with the same footprint, height (0.75mm maximum), and mounting specifications. No PCB layout modifications are required for substitution.

Q: What compliance standards apply to both parts?

A: Both parts are RoHS3 compliant, REACH unaffected, and carry ECCN EAR99 classification. Both maintain MSL 1 (Unlimited) rating and are classified under HTSUS 8548.00.0000.