Equivalent & Substitute Parts for BK/MAX-60

Part Overview

The BK/MAX-60 is a 60A automotive blade fuse rated for 32V DC operation with fast-blow response characteristics. Manufactured by Eaton - Bussmann Electrical Division, this component is designed for automotive electrical systems requiring reliable overcurrent protection. The part maintains Active product status with 812 units currently in stock. Identifying equivalent substitute parts ensures design flexibility and supply chain continuity when the primary part number becomes unavailable or when alternative sourcing is required.

Substiute Parts

BK/MAX-60

Eaton - Bussmann Electrical DivisionIn Stock: 832BK/MAX-60 Datasheet

Current PartRFQ

MAX-60

Eaton - Bussmann Electrical DivisionIn Stock: 832MAX-60 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BK/MAX-60 are identified based on strict parametric equivalence across the following critical specifications:

• Current Rating: 60 A (exact match required)
• Voltage Rating - DC: 32 V (exact match required)
• Fuse Type: Automotive (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: Blade, Max (exact match required)
• Breaking Capacity @ Rated Voltage: 1kA (exact match required)
• Mounting Type: Requires Holder (exact match required)
• Physical Dimensions: 1.150" L x 0.350" W x 0.850" H (exact match required)

Only parts meeting all these parameters are classified as direct substitutes. Variations in any of these specifications indicate incompatibility with the original application circuit.

Parameter Comparison

Engineering Selection Recommendations

The MAX-60 is a direct parametric equivalent to the BK/MAX-60 and qualifies as a suitable substitute part. Both components are manufactured by Eaton - Bussmann Electrical Division within the MAX series and maintain identical electrical and mechanical specifications. Both parts carry Active product status, ensuring continued availability and support.

The MAX-60 demonstrates enhanced RoHS compliance classification (ROHS3 Compliant versus RoHS Compliant), indicating alignment with current environmental regulatory standards. Both parts maintain identical export classification (EAR99) and tariff codes (8536.10.0040), supporting consistent procurement and logistics processing.

Selection between BK/MAX-60 and MAX-60 may be based on inventory availability, supply chain logistics, or organizational procurement preferences, as both parts are functionally and mechanically interchangeable within automotive electrical protection circuits.

Frequently Asked Questions (FAQ)

Q: Can MAX-60 be used as a direct replacement for BK/MAX-60 in automotive circuits?

A: Yes. Both parts are identical in current rating (60A), voltage rating (32V DC), fuse type (Automotive), response time (Fast Blow), package configuration (Blade, Max), breaking capacity (1kA), and physical dimensions. They are mechanically and electrically interchangeable.

Q: Are there any compliance differences between BK/MAX-60 and MAX-60?

A: Both parts are RoHS compliant. MAX-60 carries ROHS3 classification, representing current regulatory alignment. Both maintain identical ECCN (EAR99) and HTSUS (8536.10.0040) designations.

Q: What mounting requirements apply to both substitute parts?

A: Both BK/MAX-60 and MAX-60 require a dedicated fuse holder for installation. They are not designed for direct circuit board mounting and must be installed in a compatible Max-series automotive fuse holder.

Q: Are physical dimensions identical between the two parts?

A: Yes. Both parts measure 1.150" L x 0.350" W x 0.850" H (29.21mm x 8.89mm x 21.59mm) and feature identical Blue coloring, ensuring compatibility with existing fuse holder assemblies.

Q: What is the breaking capacity specification for these fuses?

A: Both BK/MAX-60 and MAX-60 are rated for 1kA breaking capacity at their rated voltage, meeting automotive circuit protection standards.

Q: Can these fuses be used in applications rated for different current or voltage specifications?

A: No. These fuses are specifically rated for 60A at 32V DC. Use only in circuits designed for these exact specifications. Substitution is limited to parts with identical electrical ratings.